Re: [PATCH] workqueue.c: Change workqueue to accept variable length name

[Tejun Heo]

Hello,

On Fri, Dec 22, 2023 at 10:35:03AM -0500, Audra Mitchell wrote:
> We have one concrete example from a Hitachi block device driver (notice the
> 47a1/47a2 gets
> cut off with the workqueue name):
> 
> Device                              Workqueue Name (24char zero terminated)
> /dev/sd0279b080047a1   xfs-blockgc/sd0279b0800
> /dev/sd0279b080047a2   xfs-blockgc/sd0279b0800

I see, so it's a combination of somewhat lengthy device names and then xfs
adding a prefix to them. Neither is particularly long but the combination
is.

> I can also imagine this issue being present with nvme devices, but the
> request came from Hitachi.
> I believe it would be up to the device driver to determine if the name can
> be shortened and I've
> included Hitachi requester on this email thread.
> 
> Alternatively, we could increase the size of the WQ_NAME_LEN, but it seems
> highly likely we are
> going to butt against the static size again in the future. We previously
> had variable length names
> and it seems (to me) to be the best long term path forward.

Can we just bump the length to 32 and trigger a warning if the requested
name overruns? I want to provide some pressure to limit the length of the
name so that it doesn't get too long over time. If folks bump into it and
can't find a different way to deal with it, we can get bring back the
subject.

Thanks.

-- 
tejun