Re: [RFC 8/9] PCI/pwrseq: add a pwrseq driver for QCA6390

[Chen-Yu Tsai]

On Tue, Jan 9, 2024 at 5:18 PM Kalle Valo <kvalo@xxxxxxxxxx> wrote:
>
> Jeff Johnson <quic_jjohnson@xxxxxxxxxxx> writes:
>
> > On 1/4/2024 5:01 AM, Bartosz Golaszewski wrote:
> >> diff --git a/drivers/pci/pcie/pwrseq/Kconfig b/drivers/pci/pcie/pwrseq/Kconfig
> >> index 010e31f432c9..f9fe555b8506 100644
> >> --- a/drivers/pci/pcie/pwrseq/Kconfig
> >> +++ b/drivers/pci/pcie/pwrseq/Kconfig
> >> @@ -6,3 +6,14 @@ menuconfig PCIE_PWRSEQ
> >>      help
> >>        Say yes here to enable support for PCIe power sequencing
> >>        drivers.
> >> +
> >> +if PCIE_PWRSEQ
> >> +
> >> +config PCIE_PWRSEQ_QCA6390
> >> +    tristate "PCIe Power Sequencing driver for QCA6390"
> >> +    depends on ARCH_QCOM || COMPILE_TEST
> >> +    help
> >> +      Enable support for the PCIe power sequencing driver for the
> >> +      ath11k module of the QCA6390 WLAN/BT chip.
> >> +
> >> +endif
> >
> > As I mentioned in the 5/9 patch I'm concerned that the current
> > definition of PCIE_PWRSEQ and PCIE_PWRSEQ_QCA6390 will effectively hide
> > the fact that QCA6390 may need additional configuration since the menu
> > item will only show up if you have already enabled PCIE_PWRSEQ.
> > Yes I see that these are set in the defconfig in 9/9 but I'm concerned
> > about the more generic case.
> >
> > I'm wondering if there should be a separate config QCA6390 within ath11k
> > which would then select PCIE_PWRSEQ and PCIE_PWRSEQ_QCA6390
>
> Or is it possible to provide an optional dependency in Kconfig (I guess

imply PCIE_PWRSEQ
imply PCIE_PWRSEQ_QCA6390
?

> not)? Or what about mentioning about PCIE_PWRSEQ_QCA6390 in ATH11K_PCI
> help text?