Re: [PATCH v3 0/4] Bluetooth: Improve retrying of connection attempts

[Luiz Augusto von Dentz]

Hi Jonas,

On Mon, Jan 8, 2024 at 5:46 PM Jonas Dreßler <verdre@xxxxxxx> wrote:
>
> Since commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect
> requests"), the kernel supports trying to connect again in case the
> bluetooth card is busy and fails to connect.
>
> The logic that should handle this became a bit spotty over time, and also
> cards these days appear to fail with more errors than just "Command
> Disallowed".
>
> This series refactores the handling of concurrent connection requests
> by serializing all "Create Connection" commands for ACL connections
> similar to how we do it for LE connections.
>
> ---
>
> v1: https://lore.kernel.org/linux-bluetooth/20240102185933.64179-1-verdre@xxxxxxx/
> v2: https://lore.kernel.org/linux-bluetooth/20240108183938.468426-1-verdre@xxxxxxx/
> v3:
>   - Move the new sync function to hci_sync.c as requested by review
>   - Abort connection on failure using hci_abort_conn_sync() instead of
>     hci_abort_conn()
>   - Make the last commit message a bit more precise regarding the meaning
>     of BT_CONNECT2 state
>
> Jonas Dreßler (4):
>   Bluetooth: Remove superfluous call to hci_conn_check_pending()
>   Bluetooth: hci_event: Use HCI error defines instead of magic values
>   Bluetooth: hci_conn: Only do ACL connections sequentially
>   Bluetooth: Remove pending ACL connection attempts
>
>  include/net/bluetooth/hci.h      |  3 ++
>  include/net/bluetooth/hci_core.h |  1 -
>  include/net/bluetooth/hci_sync.h |  3 ++
>  net/bluetooth/hci_conn.c         | 83 +++-----------------------------
>  net/bluetooth/hci_event.c        | 29 +++--------
>  net/bluetooth/hci_sync.c         | 72 +++++++++++++++++++++++++++
>  6 files changed, 93 insertions(+), 98 deletions(-)
>
> --
> 2.43.0

After rebasing and fixing a little bit here and there, see v4, looks
like this changes is affecting the following mgmt-tester -s "Pair
Device - Power off 1":

Pair Device - Power off 1 - init
  Read Version callback
    Status: Success (0x00)
    Version 1.22
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Enable management Mesh interface
  Enabling Mesh feature
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x05f1
    Supported settings: 0x0001bfff
    Current settings: 0x00000080
    Class: 0x000000
    Name:
    Short name:
  Mesh feature is enabled
Pair Device - Power off 1 - setup
  Setup sending Set Bondable (0x0009)
  Setup sending Set Powered (0x0005)
  Initial settings completed
  Test setup condition added, total 1
  Client set connectable: Success (0x00)
  Test setup condition complete, 0 left
Pair Device - Power off 1 - setup complete
Pair Device - Power off 1 - run
  Sending Pair Device (0x0019)
Bluetooth: hci0: command 0x0405 tx timeout
Bluetooth: hci0: command 0x0408 tx timeout
  Test condition added, total 1
Pair Device - Power off 1 - test timed out
  Pair Device (0x0019): Disconnected (0x0e)
Pair Device - Power off 1 - test not run
Pair Device - Power off 1 - teardown
Pair Device - Power off 1 - teardown
  Index Removed callback
    Index: 0x0000
Pair Device - Power off 1 - teardown complete
Pair Device - Power off 1 - done

-- 
Luiz Augusto von Dentz