Re: [PATCH v4 2/2] hwmon: (acpi_power_meter) Ensure IPMI space handler is ready on Dell systems

[Guenter Roeck]

On 1/9/24 13:28, Corey Minyard wrote:
> On Tue, Jan 09, 2024 at 07:23:40AM -0800, Guenter Roeck wrote:
> > On 1/8/24 20:12, Kai-Heng Feng wrote:
> > > The following error can be observed at boot:
> > > [    3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130)
> > > [    3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261)
> > >
> > > [    3.717936] No Local Variables are initialized for Method [_GHL]
> > >
> > > [    3.717938] No Arguments are initialized for method [_GHL]
> > >
> > > [    3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
> > > [    3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
> > > [    3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST
> > >
> > > On Dell systems several methods of acpi_power_meter access variables in
> > > IPMI region [0], so wait until IPMI space handler is installed by
> > > acpi_ipmi and also wait until SMI is selected to make the space handler
> > > fully functional.
> > >
> > > [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62
> > >
> > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> > > ---
> > > v4:
> > >    - No change.
> > >
> > > v3:
> > >    - Use helper.
> > >    - Use return value to print warning message.
> > >
> > > v2:
> > >    - Use completion instead of request_module().
> > >
> > >    drivers/hwmon/acpi_power_meter.c | 6 ++++++
> > >    1 file changed, 6 insertions(+)
> > >
> > > diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
> > > index 703666b95bf4..33fb9626633d 100644
> > > --- a/drivers/hwmon/acpi_power_meter.c
> > > +++ b/drivers/hwmon/acpi_power_meter.c
> > > @@ -883,6 +883,12 @@ static int acpi_power_meter_add(struct acpi_device *device)
> > >    	strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS);
> > >    	device->driver_data = resource;
> > > +	if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") &&
> > > +	    acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) {
> > > +		if (acpi_wait_for_acpi_ipmi())
> > > +			dev_warn(&device->dev, "Waiting for ACPI IPMI timeout");
> > > +	}
> > > +
> >
> > What a hack :-(.
> >
> > This needs a comment in the driver explaining the rationale for this change, and
> > also a comment explaining why, for example, using late_initcall() does not help.
> >
> > If CONFIG_IPMI_SI=n, acpi_wait_for_acpi_ipmi() will return 0, indicating success.
> > I can only imagine that this will result in a failure since the whole point
> > of this code is to wait until that driver is loaded. Please explain how and why
> > the code works with CONFIG_IPMI_SI=n. Similar, if the function returns an error,
> > I can not imagine how it would make sense to instantiate the driver. If it does
> > make sense to continue in this situation, a comment is needed in the code
> > describing the rationale.
>
> I'm trying to figure out where CONFIG_IPMI_SI comes in here.  It's
> nowhere in these patches or in drivers/acpi.  ACPI_IPMI depends on
> IPMI_HANDLER, but that's all I found.  However, ACPI_IPMI can be "m" as
> you mention and SENSOR_ACPI_POWER is only under the ACPI config, which
> is a problem.

The patch above is looking for IPI0001, which is instantiated in

drivers/char/ipmi/ipmi_si_platform.c:   { "IPI0001", 0 },
drivers/char/ipmi/ipmi_ssif.c:  { "IPI0001", 0 },

Are you saying that the above code doesn't depend on it ? In that case,
why does it need to check for the IPI0001 device in the first place ?

That will need another comment/explanation in the code because people
(or maybe dummies) like me won't understand the non-dependency (i.e.,
the need to look for IPI0001 but not requiring the associated code).

More specifically, unless I really don't understand the acpi code,
acpi_dev_get_first_match_dev() will return NULL if there is no matching
device. In that case, the above code won't call acpi_wait_for_acpi_ipmi().
Fine, but why would this driver have to wait for ipmi if and only if there
is a device (and thus a driver) for IPI0001 ?

Thanks,
Guenter

> I do think there are other issues with this patch, though.  The IPMI
> handler code decouples the user from the driver from a dependency point
> of view.  It seems to be fairly common to see IPMI_HANDLER and
> ACPI_IPMI as "y" and IPMI_SI (and IPMI_SSIF, and others) as "m".  That
> means this code will run but will wait for the IPMI device to appear,
> which may not be until the module gets loaded, which may be far more
> than 2 seconds later.
>
> I'm not quite sure how to fix this.  Really, the add call for this
> driver shouldn't be called until the IPMI device is present.  Doesn't
> ACPI have mechanisms to handle this sort of thing?  If so, the hack may
> need to be in the handling of that ACPI data (this field is not there
> but should be), not here, which as Guenter says, is a big hack.
>
> -corey
>
> > Third, the new symbol is declared with CONFIG_ACPI, but defined with
> > CONFIG_IPMI_SI. I can not imagine how this would compile with CONFIG_ACPI=y
> > and CONFIG_IPMI_SI={m,n} and/or CONFIG_ACPI_IPMI={m,n}.
> >
> > On top of that, IPMI_SI and ACPI_IPMI are is tristate, as is SENSORS_ACPI_POWER.
> > This means that SENSORS_ACPI_POWER=y combined with CONFIG_IPMI_SI={m,n} or
> > CONFIG_ACPI_IPMI={m,n} will result in a compile failure.
> >
> > Please make sure that this code compiles with all possible symbol combinations.
> >
> > Thanks,
> > Guenter
> >
> > >    	res = read_capabilities(resource);
> > >    	if (res)
> > >    		goto exit_free;