[PATCH v2 1/4] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints

[Dumitru Ceclan]

ADRF5740 and HMC540S have a 4 bit parallel interface.
Update ctr-gpios description and min/maxItems values depending on the
matched compatible to correctly reflect the hardware properties.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
---
 .../bindings/iio/amplifiers/adi,hmc425a.yaml  | 33 +++++++++++++++++--
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 67de9d4e3a1d..a434cb8ddcc9 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -33,11 +33,38 @@ properties:
 
   ctrl-gpios:
     description:
-      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
-      connected to the control pins V1-V6.
-    minItems: 6
+      Must contain an array of GPIO specifiers, referring to the GPIO pins
+      connected to the control pins.
+        ADRF5740  - 4 GPIO connected to D2-D5
+        HMC540S   - 4 GPIO connected to V1-V4
+        HMC425A   - 6 GPIO connected to V1-V6
+    minItems: 1
     maxItems: 6
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,hmc425a
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 6
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,adrf5740
+              - const: adi,hmc540s
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 4
+          maxItems: 4
+
 required:
   - compatible
   - ctrl-gpios
-- 
2.42.0