Re: [PATCH v3 1/3] pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK() macro

[Lad, Prabhakar]

Hi Geert,

On Thu, Jan 4, 2024 at 4:25 PM Geert Uytterhoeven <geert@linux-m68korg> wrote:
>
> Hi Prabhakar,
>
> On Thu, Jan 4, 2024 at 4:55 PM Lad, Prabhakar
> <prabhakar.csengg@xxxxxxxxx> wrote:
> > On Tue, Jan 2, 2024 at 10:18 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> > > On Thu, Dec 21, 2023 at 10:04 PM Lad, Prabhakar
> > > <prabhakar.csengg@xxxxxxxxx> wrote:
> > > > On Wed, Dec 6, 2023 at 1:13 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> > > > > On Fri, Dec 1, 2023 at 2:16 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> > > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > > >
> > > > > > Currently we assume all the port pins are sequential ie always PX_0 to
> > > > > > PX_n (n=1..7) exist, but on RZ/Five SoC we have additional pins P19_1 to
> > > > > > P28_5 which have holes in them, for example only one pin on port19 is
> > > > > > available and that is P19_1 and not P19_0. So to handle such cases
> > > > > > include pinmap for each port which would indicate the pin availability
> > > > > > on each port. As the pincount can be calculated based on pinmap drop this
> > > > > > from RZG2L_GPIO_PORT_PACK() macro and update RZG2L_GPIO_PORT_GET_PINCNT()
> > > > > > macro.
> > > > > >
> > > > > > Previously we had a max of 7 pins on each port but on RZ/Five Port-20
> > > > > > has 8 pins, so move the single pin configuration to BIT(63).
> > > > > >
> > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > >
> > > > > Thanks for your patch!
> > > > >
> > > > > > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > > > > > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > > > > > @@ -80,15 +80,17 @@
> > > > > >   * n indicates number of pins in the port, a is the register index
> > > > > >   * and f is pin configuration capabilities supported.
> > > > > >   */
> > > > > > -#define RZG2L_GPIO_PORT_PACK(n, a, f)  (((n) << 28) | ((a) << 20) | (f))
> > > > > > -#define RZG2L_GPIO_PORT_GET_PINCNT(x)  (((x) & GENMASK(30, 28)) >> 28)
> > > > > > +#define RZG2L_GPIO_PORT_PACK(n, a, f)  (((n) > 0 ? ((u64)(GENMASK_ULL(((n) - 1 + 28), 28))) : 0) | \
> > > > >
> > > > > The mask creation can be simplified to
> > > > >
> > > > >     ((1ULL << (n)) - 1) << 28
> > > > >
> > > > OK.
> > > >
> > > > > but see below...
> > > > >
> > > > > > +                                        ((a) << 20) | (f))
> > > > > > +#define RZG2L_GPIO_PORT_GET_PINMAP(x)  (((x) & GENMASK_ULL(35, 28)) >> 28)
> > > > > > +#define RZG2L_GPIO_PORT_GET_PINCNT(x)  (hweight8(RZG2L_GPIO_PORT_GET_PINMAP((x))))
> > > > >
> > > > > I think we've reached the point where it would be easier for the
> > > > > casual reviewer to #define PIN_CFG_*_MASK for all fields, and use
> > > > > FIELD_{PREP,GET}() to pack resp. extract values.  That would also
> > > > > make it more obvious which bits are in use, and how many bits are
> > > > > still available for future use.
>
> > To clarify, you mean to define PIN_CFG_*_MASK for all
> > PIN_CFG_IOLH_A..PIN_CFG_OEN macros? I ask because we dont extract the
> > respective CFG flags in the code.
>
> The PIN_CFG_IOLH_A..PIN_CFG_OEN macros are single-bit definitions.
> I mean to #define PIN_CFG_*_MASK macros for all multi-bit fields, currently
> accessed using open-coded GENMASK().
>
> You already tried:
>
>     #define RZG2L_GPIO_PORT_PIN_CNT_MASK    GENMASK(31, 28)
>     #define RZG2L_GPIO_PORT_PIN_REG_MASK    GENMASK(27, 20)
>     #define RZG2L_GPIO_PORT_PIN_CFG_MASK    GENMASK(19, 0)
>
> As they actually share the PIN_CFG_* bit space, I'd call them:
>
>     #define PIN_CFG_PIN_CNT_MASK    GENMASK(31, 28)
>     #define PIN_CFG_PIN_REG_MASK    GENMASK(27, 20)
>     #define PIN_CFG_MASK    GENMASK(19, 0)
>
> Also, you already have:
>
>     #define MUX_PIN_ID_MASK         GENMASK(15, 0)
>     #define MUX_FUNC_MASK           GENMASK(31, 16)
>     #define MUX_FUNC_OFFS           16
>
> But all of
>
>     #define MUX_FUNC(pinconf)       (((pinconf) & MUX_FUNC_MASK) >>
> MUX_FUNC_OFFS)
>
>     pins[i] = value & MUX_PIN_ID_MASK;
>
> can use FIELD_GET(), removing the need for MUX_FUNC_OFFS.
>
> Also:
>
>     u8 pincount = RZG2L_GPIO_PORT_GET_PINCNT(cfg);
>
> can become
>
>     u8 pincount = FIELD_GET(PIN_CFG_PIN_CNT_MASK, cfg);
>
> Same for all the other macros using GENMASK().
>
> I hope this makes it more clear what I had in mind?
> Thanks!
>
Thanks for the detailed explanation. I'll get that sorted soon.

Cheers,
Prabhakar