Re: [PATCH 04/13] spi: dt-bindings: adi,axi-spi-engine: add offload bindings

[Rob Herring]

On Wed, Jan 10, 2024 at 01:49:45PM -0600, David Lechner wrote:
> The ADI AXI SPI Engine driver supports offloading SPI transfers to
> hardware. This is essentially a feature that allows recording an
> arbitrary sequence of SPI transfers and then playing them back with
> no CPU intervention via a hardware trigger.
> 
> This adds the bindings for this feature. Each SPI Engine instance
> can have from 0 to 32 offload instances. Each offload instance has a
> trigger input and a data stream output. As an example, this could be
> used with an ADC SPI peripheral. In this case the trigger is connected
> to a PWM/clock to determine the sampling rate for the ADC and the output
> stream is connected to a DMA channel to pipe the sample data to memory.
> 
> SPI peripherals act as consumers of the offload instances. Typically,
> one SPI peripheral will be connected to one offload instance. But to
> make the bindings future-proof, the property is an array.

Is there some sort of arbitration between multiple offload engines on 
the same chip select? If not, I don't see how it would work.

I think this whole thing could be simplified down to just 3 
SPI controller properties: pwms, dmas, and adi,offload-cs-map. Each 
property is has entries equal the number of offload engines. The last 
one maps an offload engine to a SPI chip-select.

> 
> Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
> ---
>  .../spi/adi,axi-spi-engine-peripheral-props.yaml   | 24 +++++++++++
>  .../bindings/spi/adi,axi-spi-engine.yaml           | 49 +++++++++++++++++++++-
>  .../bindings/spi/spi-peripheral-props.yaml         |  1 +
>  3 files changed, 73 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine-peripheral-props.yaml
> new file mode 100644
> index 000000000000..19b685fc3b39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine-peripheral-props.yaml
> @@ -0,0 +1,24 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/adi,axi-spi-engine-peripheral-props.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Peripheral properties for Analog Devices AXI SPI Engine Controller
> +
> +maintainers:
> +  - Michael Hennerich <Michael.Hennerich@xxxxxxxxxx>
> +  - Nuno Sá <nuno.sa@xxxxxxxxxx>
> +
> +properties:
> +  adi,offloads:
> +    description:
> +      List of AXI SPI Engine offload instances assigned to this peripheral.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    maxItems: 32
> +    items:
> +      items:
> +        - minimum: 0
> +          maximum: 31

This defines a matrix. You want:

minItems: 1
maxItems: 32
items:
  maximum: 31

(0 is already the min).

> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml
> index d48faa42d025..69f3261bab47 100644
> --- a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml
> +++ b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml
> @@ -21,6 +21,23 @@ maintainers:
>  allOf:
>    - $ref: /schemas/spi/spi-controller.yaml#
>  
> +$defs:
> +  offload:
> +    description:
> +      Describes the connections of the trigger input and the data output stream
> +      of one or more offload instances.
> +
> +    properties:
> +      reg:
> +        description:
> +          Index of the offload instance.
> +        items:
> +          - minimum: 0
> +            maximum: 31
> +
> +    required:
> +      - reg
> +
>  properties:
>    compatible:
>      const: adi,axi-spi-engine-1.00.a
> @@ -41,6 +58,22 @@ properties:
>        - const: s_axi_aclk
>        - const: spi_clk
>  
> +  offloads:
> +    type: object
> +    description: Zero or more offloads supported by the controller.
> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +    patternProperties:
> +      "^offload@[0-8a-f]+$":
> +        type: object
> +        $ref: '#/$defs/offload'
> +
>  required:
>    - compatible
>    - reg
> @@ -62,5 +95,19 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> -        /* SPI devices */
> +        offloads {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            offload@0 {
> +                compatible = "adi,example-offload";

No fake examples please. This should give you a warning.

> +                reg = <0>;
> +            };
> +        };
> +
> +        adc@0 {
> +            compatible = "adi,example-adc";
> +            reg = <0>;
> +            adi,offloads = <0>;
> +        };
>      };
> diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> index 1c8e71c18234..7beb5a3798a5 100644
> --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
> @@ -132,6 +132,7 @@ properties:
>  
>  # The controller specific properties go here.
>  allOf:
> +  - $ref: adi,axi-spi-engine-peripheral-props.yaml#
>    - $ref: arm,pl022-peripheral-props.yaml#
>    - $ref: cdns,qspi-nor-peripheral-props.yaml#
>    - $ref: samsung,spi-peripheral-props.yaml#
> 
> -- 
> 2.43.0
>