RE: [EXT] Re: [PATCH v1] Bluetooth: btnxpuart: Disable Power Save feature on startup

[Neeraj Sanjay Kale]

Hi Paul,

Thank you for reviewing the patch. I have sent the corrections as you have requested in v2 patch.

> Am 11.01.24 um 09:06 schrieb Neeraj Sanjay Kale:
> > This sets the default power save mode setting to enabled.
> 
> This contradicts the commit message summary, which says “Disable”.
I may have pressed "Undo" a little too long it seems.

> 
> > The power save feature is now stable and stress test issues, such as
> > the TX timeout error, has been resolved.
> 
> have been
> 
> Please reference one commit, that fixed this.
Added commit reference and title.

> 
> > With this setting, the driver will send the vendor command to FW at
> > startup, to enable power save feature.
> > User can disable this feature using the following vendor
> > command:
> > hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
> 
> It would help me, if you used the full 75 characters per line for commit
> messages, and would not break the line after every sentence. If a paragraph
> makes sense, please separate it by a  blank line.
Fixed.

> 
> > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
> > ---
> >   drivers/bluetooth/btnxpuart.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/bluetooth/btnxpuart.c
> > b/drivers/bluetooth/btnxpuart.c index 7f88b6f52f26..42e929f0d141
> > 100644
> > --- a/drivers/bluetooth/btnxpuart.c
> > +++ b/drivers/bluetooth/btnxpuart.c
> > @@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
> >
> >   /* Default configurations */
> >   #define DEFAULT_H2C_WAKEUP_MODE     WAKEUP_METHOD_BREAK
> > -#define DEFAULT_PS_MODE              PS_MODE_DISABLE
> > +#define DEFAULT_PS_MODE              PS_MODE_ENABLE
> >   #define FW_INIT_BAUDRATE    HCI_NXP_PRI_BAUDRATE
> >
> >   static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16
> > opcode,
> 
> Reviewed-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>

Thanks,
Neeraj