Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree

[Andrew Lunn]

> Sorry for the confusion, the pin nodes are for the MDIO and MDC, these
> PINs are used by the dedicated hardware MDIO block in the SoC. I will update
> the node name from mux_0 to MDC, mux_1 to MDIO, to make it clear. The driver
> for this node is drivers/net/mdio/mdio-ipq4019.c, it is not related to the
> mdio-mux-* code.

So these is all about pinmux.

When you say:
> PINs are used by the dedicated hardware MDIO block in the SoC

do you actually mean:

PINs are used by the two dedicated hardware MDIO blocks in the SoC.

You have two sets of mdio/mdc configurations here, so i assume there
are two MDIO hardware blocks, each being an MDIO bus master.

    Andrew