Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Add gpio keys

[Geert Uytterhoeven]

Hi Claudiu,

On Wed, Dec 27, 2023 at 2:08 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> RZ SMARC Carrier II board has 3 user buttons called USER_SW1, USER_SW2,
> USER_SW3. Add a DT node in device tree to propertly instantiate the
> gpio-keys driver for these buttons.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
> @@ -6,6 +6,7 @@
>   */
>
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
>  #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
>
>  / {
> @@ -14,6 +15,37 @@ aliases {
>                 mmc1 = &sdhi1;
>         };
>
> +       keys {

Do you mind if I s/keys/keypad/ while applying? ...

> +               compatible = "gpio-keys";
> +
> +               key-1 {
> +                       interrupts = <RZG2L_GPIO(18, 0) IRQ_TYPE_EDGE_FALLING>;

Oh, the horror of interrupt controllers that don't support generating
interrupts on both edges...

> +                       interrupt-parent = <&pinctrl>;

.. and move these one level up, to avoid duplication?

> +                       linux,code = <KEY_1>;
> +                       label = "USER_SW1";
> +                       wakeup-source;
> +                       debounce-interval = <20>;
> +               };
> +
> +               key-2 {
> +                       interrupts = <RZG2L_GPIO(0, 1) IRQ_TYPE_EDGE_FALLING>;
> +                       interrupt-parent = <&pinctrl>;
> +                       linux,code = <KEY_2>;
> +                       label = "USER_SW2";
> +                       wakeup-source;
> +                       debounce-interval = <20>;
> +               };
> +
> +               key-3 {
> +                       interrupts = <RZG2L_GPIO(0, 3) IRQ_TYPE_EDGE_FALLING>;
> +                       interrupt-parent = <&pinctrl>;
> +                       linux,code = <KEY_3>;
> +                       label = "USER_SW3";
> +                       wakeup-source;
> +                       debounce-interval = <20>;
> +               };
> +       };
> +
>         vcc_sdhi1: regulator-vcc-sdhi1 {
>                 compatible = "regulator-fixed";
>                 regulator-name = "SDHI1 Vcc";

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v6.9, with the above fixed.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68korg

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds