Re: [PATCH 2/2] i2c: synquacer: Remove a clk reference from struct synquacer_i2c

[Ard Biesheuvel]

On Sat, 6 Jan 2024 at 13:48, Christophe JAILLET
<christophe.jaillet@xxxxxxxxxx> wrote:
>
> 'pclk' is only used locally in the probe. Remove it from the
> 'synquacer_i2c' structure.
>
> Also remove a useless debug message.
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>

Acked-by: Ard Biesheuvel <ardb@xxxxxxxxxx>

> ---
>  drivers/i2c/busses/i2c-synquacer.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
> index a73f5bb9a164..e774b9f499b6 100644
> --- a/drivers/i2c/busses/i2c-synquacer.c
> +++ b/drivers/i2c/busses/i2c-synquacer.c
> @@ -138,7 +138,6 @@ struct synquacer_i2c {
>         int                     irq;
>         struct device           *dev;
>         void __iomem            *base;
> -       struct clk              *pclk;
>         u32                     pclkrate;
>         u32                     speed_khz;
>         u32                     timeout_ms;
> @@ -535,6 +534,7 @@ static const struct i2c_adapter synquacer_i2c_ops = {
>  static int synquacer_i2c_probe(struct platform_device *pdev)
>  {
>         struct synquacer_i2c *i2c;
> +       struct clk *pclk;
>         u32 bus_speed;
>         int ret;
>
> @@ -550,13 +550,12 @@ static int synquacer_i2c_probe(struct platform_device *pdev)
>         device_property_read_u32(&pdev->dev, "socionext,pclk-rate",
>                                  &i2c->pclkrate);
>
> -       i2c->pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
> -       if (IS_ERR(i2c->pclk))
> -               return dev_err_probe(&pdev->dev, PTR_ERR(i2c->pclk),
> +       pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
> +       if (IS_ERR(pclk))
> +               return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
>                                      "failed to get and enable clock\n");
>
> -       dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
> -       i2c->pclkrate = clk_get_rate(i2c->pclk);
> +       i2c->pclkrate = clk_get_rate(pclk);
>
>         if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE ||
>             i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE)
> --
> 2.34.1
>