Re: [PATCH v11 4/5] Documentation: tracing: Add ring-buffer mapping

[Google]

On Thu, 11 Jan 2024 16:17:11 +0000
Vincent Donnefort <vdonnefort@xxxxxxxxxx> wrote:

> It is now possible to mmap() a ring-buffer to stream its content. Add
> some documentation and a code example.
> 
> Signed-off-by: Vincent Donnefort <vdonnefort@xxxxxxxxxx>
> 
> diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
> index 5092d6c13af5..0b300901fd75 100644
> --- a/Documentation/trace/index.rst
> +++ b/Documentation/trace/index.rst
> @@ -29,6 +29,7 @@ Linux Tracing Technologies
>     timerlat-tracer
>     intel_th
>     ring-buffer-design
> +   ring-buffer-map
>     stm
>     sys-t
>     coresight/index
> diff --git a/Documentation/trace/ring-buffer-map.rst b/Documentation/trace/ring-buffer-map.rst
> new file mode 100644
> index 000000000000..2ba7b5339178
> --- /dev/null
> +++ b/Documentation/trace/ring-buffer-map.rst
> @@ -0,0 +1,105 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +==================================
> +Tracefs ring-buffer memory mapping
> +==================================
> +
> +:Author: Vincent Donnefort <vdonnefort@xxxxxxxxxx>
> +
> +Overview
> +========
> +Tracefs ring-buffer memory map provides an efficient method to stream data
> +as no memory copy is necessary. The application mapping the ring-buffer becomes
> +then a consumer for that ring-buffer, in a similar fashion to trace_pipe.
> +
> +Memory mapping setup
> +====================
> +The mapping works with a mmap() of the trace_pipe_raw interface.
> +
> +The first system page of the mapping contains ring-buffer statistics and
> +description. It is referred as the meta-page. One of the most important field of
> +the meta-page is the reader. It contains the subbuf ID which can be safely read
> +by the mapper (see ring-buffer-design.rst).
> +
> +The meta-page is followed by all the subbuf, ordered by ascendant ID. It is
> +therefore effortless to know where the reader starts in the mapping:
> +
> +.. code-block:: c
> +
> +        reader_id = meta->reader->id;
> +        reader_offset = meta->meta_page_size + reader_id * meta->subbuf_size;
> +
> +When the application is done with the current reader, it can get a new one using
> +the trace_pipe_raw ioctl() TRACE_MMAP_IOCTL_GET_READER. This ioctl also updates
> +the meta-page fields.
> +
> +Limitations
> +===========
> +When a mapping is in place on a Tracefs ring-buffer, it is not possible to
> +either resize it (either by increasing the entire size of the ring-buffer or
> +each subbuf). It is also not possible to use snapshot or splice.
> +
> +Concurrent readers (either another application mapping that ring-buffer or the
> +kernel with trace_pipe) are allowed but not recommended. They will compete for
> +the ring-buffer and the output is unpredictable.
> +
> +Example
> +=======
> +
> +.. code-block:: c
> +
> +        #include <fcntl.h>
> +        #include <stdio.h>
> +        #include <stdlib.h>
> +        #include <unistd.h>
> +
> +        #include <linux/trace_mmap.h>
> +
> +        #include <sys/mman.h>
> +        #include <sys/ioctl.h>
> +
> +        #define TRACE_PIPE_RAW "/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw"
> +
> +        int main(void)
> +        {
> +                int page_size = getpagesize(), fd, reader_id;
> +                unsigned long meta_len, data_len;
> +                struct trace_buffer_meta *meta;
> +                void *map, *reader, *data;

nit: this example code has a compile warning.

rbmap.c: In function ‘main’:
rbmap.c:18:21: warning: variable ‘reader’ set but not used [-Wunused-but-set-variable]
   18 |         void *map, *reader, *data;
      |                     ^~~~~~


> +
> +                fd = open(TRACE_PIPE_RAW, O_RDONLY);
> +                if (fd < 0)
> +                        exit(EXIT_FAILURE);
> +
> +                map = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
> +                if (map == MAP_FAILED)
> +                        exit(EXIT_FAILURE);
> +
> +                meta = (struct trace_buffer_meta *)map;
> +                meta_len = meta->meta_page_size;
> +
> +                printf("entries:        %lu\n", meta->entries);
> +                printf("overrun:        %lu\n", meta->overrun);
> +                printf("read:           %lu\n", meta->read);
> +                printf("subbufs_touched:%lu\n", meta->subbufs_touched);
> +                printf("subbufs_lost:   %lu\n", meta->subbufs_lost);
> +                printf("subbufs_read:   %lu\n", meta->subbufs_read);
> +                printf("nr_subbufs:     %u\n", meta->nr_subbufs);
> +
> +                data_len = meta->subbuf_size * meta->nr_subbufs;
> +                data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, fd, data_len);
> +                if (data == MAP_FAILED)
> +                        exit(EXIT_FAILURE);
> +
> +                if (ioctl(fd, TRACE_MMAP_IOCTL_GET_READER) < 0)
> +                        exit(EXIT_FAILURE);
> +
> +                reader_id = meta->reader.id;
> +                reader = data + meta->subbuf_size * reader_id;

So here, maybe you need;

			printf("Current read sub-buffer address: %p\n", reader);

Thank you,

> +
> +                munmap(data, data_len);
> +                munmap(meta, meta_len);
> +                close (fd);
> +
> +                return 0;
> +        }
> -- 
> 2.43.0.275.g3460e3d667-goog
> 


-- 
Masami Hiramatsu (Google) <mhiramat@xxxxxxxxxx>