Re: [PATCH 2/3] ASoC: dt-bindings: xmos,xvf3500: add bindings for XMOS XVF3500

[Krzysztof Kozlowski]

On 15/01/2024 10:16, Javier Carrasco wrote:
> The XMOS XVF3500 VocalFusion Voice Processor[1] is a low-latency, 32-bit
> multicore controller for voice processing.
> 
> Add new bindings to define the device properties.

I don't see any bus, so how does it work? How do you get the voice data
from it? I also do not see any DAI: neither here nor in the driver...

If there is going to be any new version, then implement all following
comments:

A nit, subject: drop second/last, redundant "bindings for". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18


> 
> [1] https://www.xmos.com/xvf3500/
> 
> Signed-off-by: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/sound/xmos,xvf3500.yaml    | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml b/Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml
> new file mode 100644
> index 000000000000..e93a735a0f1a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/xmos,xvf3500.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: XMOS XVF3500 VocalFusion Voice Processor
> +
> +maintainers:
> +  - Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
> +
> +description: |-

Do not need '|-' unless you need to preserve formatting.


> +  The XMOS XVF3500 VocalFusion Voice Processor is a low-latency, 32-bit
> +  multicore controller for voice processing.
> +  https://www.xmos.com/xvf3500/
> +
> +properties:
> +  compatible:
> +    const: xmos,xvf3500
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  vcc1v0-supply:
> +    description: |

Do not need '|' unless you need to preserve formatting.


> +      Regulator for the 1V0 supply.
> +
> +  vcc3v3-supply:
> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      Regulator for the 3V3 supply.
> +
> +additionalProperties: false

This goes after required: block.

> +
> +required:
> +  - compatible
> +  - reset-gpios
> +  - vcc1v0-supply
> +  - vcc3v3-supply
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    xvf3500: voice-processor {

Drop unused label.



Best regards,
Krzysztof