Re: [f2fs-dev] [PATCH v1] f2fs: fix max open zone constraints

From: Daeho Jeong
Date: Tue Jan 16 2024 - 17:59:14 EST


On Tue, Jan 16, 2024 at 6:36 AM Wenjie Qi <qwjhust@xxxxxxxxx> wrote:
>
> We can get the number of remaining available zone
> resources by subtracting the number of active logs from
> the number of max active zones of zoned devices. We can
> use these available zone resources to reduce the number
> of pending bio when switching zones.
> If max active zones is 0, there is no limit.
>
> Signed-off-by: Wenjie Qi <qwjhust@xxxxxxxxx>
> ---
> fs/f2fs/data.c | 32 +++++++++++++++++++++++++-------
> fs/f2fs/f2fs.h | 2 ++
> fs/f2fs/super.c | 11 +++++++++++
> 3 files changed, 38 insertions(+), 7 deletions(-)
>
> diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> index dce8defdf4c7..0b62ca296074 100644
> --- a/fs/f2fs/data.c
> +++ b/fs/f2fs/data.c
> @@ -392,6 +392,19 @@ static void f2fs_zone_write_end_io(struct bio *bio)
> complete(&io->zone_wait);
> f2fs_write_end_io(bio);
> }
> +
> +static void f2fs_zone_write_end_io_nowait(struct bio *bio)
> +{
> +#ifdef CONFIG_F2FS_IOSTAT
> + struct bio_iostat_ctx *iostat_ctx = bio->bi_private;
> + struct f2fs_sb_info *sbi = iostat_ctx->sbi;
> +#else
> + struct f2fs_sb_info *sbi = (struct f2fs_sb_info *)bio->bi_private;
> +#endif
> +
> + atomic_inc(&sbi->available_active_zones);
> + f2fs_write_end_io(bio);
> +}
> #endif

I don't think this works. Let's assume we start with 2
available_active_zones and 4 active logs.
How about 4 active logs reach at the end of the zones at the same time?

>
> struct block_device *f2fs_target_device(struct f2fs_sb_info *sbi,
> @@ -1085,14 +1098,19 @@ void f2fs_submit_page_write(struct f2fs_io_info *fio)
> goto next;
> out:
> #ifdef CONFIG_BLK_DEV_ZONED
> - if (f2fs_sb_has_blkzoned(sbi) && btype < META &&
> + if (f2fs_sb_has_blkzoned(sbi) && sbi->max_active_zones && btype < META &&
> is_end_zone_blkaddr(sbi, fio->new_blkaddr)) {
> - bio_get(io->bio);
> - reinit_completion(&io->zone_wait);
> - io->bi_private = io->bio->bi_private;
> - io->bio->bi_private = io;
> - io->bio->bi_end_io = f2fs_zone_write_end_io;
> - io->zone_pending_bio = io->bio;
> + if (!atomic_add_negative(-1, &sbi->available_active_zones)) {
> + io->bio->bi_end_io = f2fs_zone_write_end_io_nowait;
> + } else {
> + atomic_inc(&sbi->available_active_zones);
> + bio_get(io->bio);
> + reinit_completion(&io->zone_wait);
> + io->bi_private = io->bio->bi_private;
> + io->bio->bi_private = io;
> + io->bio->bi_end_io = f2fs_zone_write_end_io;
> + io->zone_pending_bio = io->bio;
> + }
> __submit_merged_bio(io);
> }
> #endif
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 65294e3b0bef..2aade367ac66 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -1551,6 +1551,8 @@ struct f2fs_sb_info {
>
> #ifdef CONFIG_BLK_DEV_ZONED
> unsigned int blocks_per_blkz; /* F2FS blocks per zone */
> + unsigned int max_active_zones; /* max zone resources of the zoned device */
> + atomic_t available_active_zones; /* remaining zone resources for zone switch */
> #endif
>
> /* for node-related operations */
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index 206d03c82d96..6711283ff187 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -2385,6 +2385,12 @@ static int f2fs_remount(struct super_block *sb, int *flags, char *data)
> if (err)
> goto restore_opts;
>
> +#ifdef CONFIG_BLK_DEV_ZONED
> + if (sbi->max_active_zones)
> + atomic_set(&sbi->available_active_zones,
> + sbi->max_active_zones - F2FS_OPTION(sbi).active_logs);
> +#endif
> +
> /* flush outstanding errors before changing fs state */
> flush_work(&sbi->s_error_work);
>
> @@ -3932,6 +3938,11 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)
> if (!f2fs_sb_has_blkzoned(sbi))
> return 0;
>
> + sbi->max_active_zones = bdev_max_active_zones(bdev);
> + if (sbi->max_active_zones)
> + atomic_set(&sbi->available_active_zones,
> + sbi->max_active_zones - F2FS_OPTION(sbi).active_logs);
> +

Need to make available_active_zones not be negative, right?
Hmm, need to make sure active_logs should be equal or less than
max_active_zones.

> zone_sectors = bdev_zone_sectors(bdev);
> if (!is_power_of_2(zone_sectors)) {
> f2fs_err(sbi, "F2FS does not support non power of 2 zone sizes\n");
> --
> 2.34.1
>
>
>
> _______________________________________________
> Linux-f2fs-devel mailing list
> Linux-f2fs-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel