[PATCH v2 14/17] serial: max310x: use common power function for all variants

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

Simplify driver by defining a common function to handle the power
control of all variants.

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
 drivers/tty/serial/max310x.c | 44 ++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 25 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 83beaab3a0c5..e39d8ea51e4e 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -260,11 +260,12 @@ struct max310x_devtype {
 		unsigned short max;
 	} slave_addr;
 	int	nr;
-	void	(*power)(struct uart_port *, int);
 	char	name[9];
 	u8	mode1;
 	u8	rev_id_val;
 	u8	rev_id_reg; /* Relevant only if rev_id_val is defined. */
+	u8	power_reg; /* Register address for power/sleep control. */
+	u8	power_bit; /* Bit for sleep or power-off mode (active high). */
 };
 
 struct max310x_one {
@@ -378,18 +379,10 @@ static int max310x_detect(struct device *dev)
 
 static void max310x_power(struct uart_port *port, int on)
 {
-	max310x_port_update(port, MAX310X_MODE1_REG,
-			    MAX310X_MODE1_FORCESLEEP_BIT,
-			    on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT);
-	if (on)
-		msleep(50);
-}
+	struct max310x_port *s = dev_get_drvdata(port->dev);
 
-static void max14830_power(struct uart_port *port, int on)
-{
-	max310x_port_update(port, MAX310X_BRGCFG_REG,
-			    MAX14830_BRGCFG_CLKDIS_BIT,
-			    on ? 0 : MAX14830_BRGCFG_CLKDIS_BIT);
+	max310x_port_update(port, s->devtype->power_reg, s->devtype->power_bit,
+			    on ? 0 : s->devtype->power_bit);
 	if (on)
 		msleep(50);
 }
@@ -400,7 +393,8 @@ static const struct max310x_devtype max3107_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
 	.rev_id_val = MAX3107_REV_ID,
 	.rev_id_reg = MAX310X_REVID_REG,
-	.power	= max310x_power,
+	.power_reg = MAX310X_MODE1_REG,
+	.power_bit = MAX310X_MODE1_FORCESLEEP_BIT,
 	.slave_addr	= {
 		.min = 0x2c,
 		.max = 0x2f,
@@ -413,7 +407,8 @@ static const struct max310x_devtype max3108_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.rev_id_val = 0, /* Unsupported. */
 	.rev_id_reg = 0, /* Irrelevant when rev_id_val is not defined. */
-	.power	= max310x_power,
+	.power_reg = MAX310X_MODE1_REG,
+	.power_bit = MAX310X_MODE1_FORCESLEEP_BIT,
 	.slave_addr	= {
 		.min = 0x60,
 		.max = 0x6f,
@@ -426,7 +421,8 @@ static const struct max310x_devtype max3109_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.rev_id_val = MAX3109_REV_ID,
 	.rev_id_reg = MAX310X_REVID_EXTREG,
-	.power	= max310x_power,
+	.power_reg = MAX310X_MODE1_REG,
+	.power_bit = MAX310X_MODE1_FORCESLEEP_BIT,
 	.slave_addr	= {
 		.min = 0x60,
 		.max = 0x6f,
@@ -439,7 +435,8 @@ static const struct max310x_devtype max14830_devtype = {
 	.mode1	= MAX310X_MODE1_IRQSEL_BIT,
 	.rev_id_val = MAX14830_REV_ID,
 	.rev_id_reg = MAX310X_REVID_EXTREG,
-	.power	= max14830_power,
+	.power_reg = MAX310X_BRGCFG_REG,
+	.power_bit = MAX14830_BRGCFG_CLKDIS_BIT,
 	.slave_addr	= {
 		.min = 0x60,
 		.max = 0x6f,
@@ -1025,10 +1022,9 @@ static int max310x_rs485_config(struct uart_port *port, struct ktermios *termios
 
 static int max310x_startup(struct uart_port *port)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
 	unsigned int val;
 
-	s->devtype->power(port, 1);
+	max310x_power(port, 1);
 
 	/* Configure MODE1 register */
 	max310x_port_update(port, MAX310X_MODE1_REG,
@@ -1073,12 +1069,10 @@ static int max310x_startup(struct uart_port *port)
 
 static void max310x_shutdown(struct uart_port *port)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
-
 	/* Disable all interrupts */
 	max310x_port_write(port, MAX310X_IRQEN_REG, 0);
 
-	s->devtype->power(port, 0);
+	max310x_power(port, 0);
 }
 
 static const char *max310x_type(struct uart_port *port)
@@ -1140,7 +1134,7 @@ static int __maybe_unused max310x_suspend(struct device *dev)
 
 	for (i = 0; i < s->devtype->nr; i++) {
 		uart_suspend_port(&max310x_uart, &s->p[i].port);
-		s->devtype->power(&s->p[i].port, 0);
+		max310x_power(&s->p[i].port, 0);
 	}
 
 	return 0;
@@ -1152,7 +1146,7 @@ static int __maybe_unused max310x_resume(struct device *dev)
 	int i;
 
 	for (i = 0; i < s->devtype->nr; i++) {
-		s->devtype->power(&s->p[i].port, 1);
+		max310x_power(&s->p[i].port, 1);
 		uart_resume_port(&max310x_uart, &s->p[i].port);
 	}
 
@@ -1367,7 +1361,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		set_bit(line, max310x_lines);
 
 		/* Go to suspend mode */
-		devtype->power(&s->p[i].port, 0);
+		max310x_power(&s->p[i].port, 0);
 	}
 
 #ifdef CONFIG_GPIOLIB
@@ -1421,7 +1415,7 @@ static void max310x_remove(struct device *dev)
 		if (test_and_clear_bit(s->p[i].port.line, max310x_lines))
 			uart_remove_one_port(&max310x_uart, &s->p[i].port);
 
-		s->devtype->power(&s->p[i].port, 0);
+		max310x_power(&s->p[i].port, 0);
 	}
 
 	clk_disable_unprepare(s->clk);
-- 
2.39.2