[PATCH v2 1/4] staging: emxx_udc: Remove EMMA Mobile USB Gadget driver

From: Geert Uytterhoeven
Date: Mon Jan 22 2024 - 09:25:53 EST

Next message: Andrew Lunn: "Re: [PATCH net-next 02/20] dt-bindings: net: qcom,ppe: Add bindings yaml file"
Previous message: Geert Uytterhoeven: "[PATCH v2 2/4] staging: board: Remove KZM9D board staging code"
In reply to: Geert Uytterhoeven: "[PATCH v2 2/4] staging: board: Remove KZM9D board staging code"
Next in thread: Geert Uytterhoeven: "[PATCH v2 3/4] staging: board: Remove Armadillo-800-EVA board staging code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

No one stepped up to complete the EMMA Mobile USB Gadget driver, bring
it up to non-staging standards, and convert it to device tree.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Acked-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
---
v2:
- Add Acked-by.
---
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/emxx_udc/Kconfig | 11 -
drivers/staging/emxx_udc/Makefile | 2 -
drivers/staging/emxx_udc/TODO | 6 -
drivers/staging/emxx_udc/emxx_udc.c | 3223 ---------------------------
drivers/staging/emxx_udc/emxx_udc.h | 554 -----
7 files changed, 3799 deletions(-)
delete mode 100644 drivers/staging/emxx_udc/Kconfig
delete mode 100644 drivers/staging/emxx_udc/Makefile
delete mode 100644 drivers/staging/emxx_udc/TODO
delete mode 100644 drivers/staging/emxx_udc/emxx_udc.c
delete mode 100644 drivers/staging/emxx_udc/emxx_udc.h

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 784b9f673ead0c55..b8f777036bb22fe5 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -46,8 +46,6 @@ source "drivers/staging/iio/Kconfig"

source "drivers/staging/sm750fb/Kconfig"

-source "drivers/staging/emxx_udc/Kconfig"
-
source "drivers/staging/nvec/Kconfig"

source "drivers/staging/media/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 2ea99c7b05d978aa..5bf357782d8377c5 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_VT6656) += vt6656/
obj-$(CONFIG_VME_BUS) += vme_user/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_FB_SM750) += sm750fb/
-obj-$(CONFIG_USB_EMXX) += emxx_udc/
obj-$(CONFIG_MFD_NVEC) += nvec/
obj-$(CONFIG_STAGING_BOARD) += board/
obj-$(CONFIG_LTE_GDM724X) += gdm724x/
diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig
deleted file mode 100644
index e7a95b3b6a2f742a..0000000000000000
--- a/drivers/staging/emxx_udc/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config USB_EMXX
- tristate "EMXX USB Function Device Controller"
- depends on USB_GADGET && (ARCH_RENESAS || COMPILE_TEST)
- help
- The Emma Mobile series of SoCs from Renesas Electronics and
- former NEC Electronics include USB Function hardware.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "emxx_udc" and force all
- gadget drivers to also be dynamically linked.
diff --git a/drivers/staging/emxx_udc/Makefile b/drivers/staging/emxx_udc/Makefile
deleted file mode 100644
index 569c5e9a9baeff06..0000000000000000
--- a/drivers/staging/emxx_udc/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_USB_EMXX) := emxx_udc.o
diff --git a/drivers/staging/emxx_udc/TODO b/drivers/staging/emxx_udc/TODO
deleted file mode 100644
index 471529a470c706bf..0000000000000000
--- a/drivers/staging/emxx_udc/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-* add clock framework support (platform device with CCF needs special care)
-* break out board-specific VBUS GPIO to work with multiplatform
-* convert VBUS GPIO to use GPIO descriptors from <linux/gpio/consumer.h>
- and stop using the old GPIO API
-* DT bindings
-* move driver into drivers/usb/gadget/
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
deleted file mode 100644
index eb63daaca702e6f9..0000000000000000
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ /dev/null
@@ -1,3223 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * drivers/usb/gadget/emxx_udc.c
- * EMXX FCD (Function Controller Driver) for USB.
- *
- * Copyright (C) 2010 Renesas Electronics Corporation
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/clk.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-#include <linux/device.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include <linux/irq.h>
-#include <linux/gpio/consumer.h>
-
-#include "emxx_udc.h"
-
-#define DRIVER_DESC "EMXX UDC driver"
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
-static struct gpio_desc *vbus_gpio;
-static int vbus_irq;
-
-static const char driver_name[] = "emxx_udc";
-
-/*===========================================================================*/
-/* Prototype */
-static void _nbu2ss_ep_dma_abort(struct nbu2ss_udc *, struct nbu2ss_ep *);
-static void _nbu2ss_ep0_enable(struct nbu2ss_udc *);
-/*static void _nbu2ss_ep0_disable(struct nbu2ss_udc *);*/
-static void _nbu2ss_ep_done(struct nbu2ss_ep *, struct nbu2ss_req *, int);
-static void _nbu2ss_set_test_mode(struct nbu2ss_udc *, u32 mode);
-static void _nbu2ss_endpoint_toggle_reset(struct nbu2ss_udc *udc, u8 ep_adrs);
-
-static int _nbu2ss_pullup(struct nbu2ss_udc *, int);
-static void _nbu2ss_fifo_flush(struct nbu2ss_udc *, struct nbu2ss_ep *);
-
-/*===========================================================================*/
-/* Macro */
-#define _nbu2ss_zero_len_pkt(udc, epnum) \
- _nbu2ss_ep_in_end(udc, epnum, 0, 0)
-
-/*===========================================================================*/
-/* Global */
-static struct nbu2ss_udc udc_controller;
-
-/*-------------------------------------------------------------------------*/
-/* Read */
-static inline u32 _nbu2ss_readl(void __iomem *address)
-{
- return __raw_readl(address);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Write */
-static inline void _nbu2ss_writel(void __iomem *address, u32 udata)
-{
- __raw_writel(udata, address);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Set Bit */
-static inline void _nbu2ss_bitset(void __iomem *address, u32 udata)
-{
- u32 reg_dt = __raw_readl(address) | (udata);
-
- __raw_writel(reg_dt, address);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Clear Bit */
-static inline void _nbu2ss_bitclr(void __iomem *address, u32 udata)
-{
- u32 reg_dt = __raw_readl(address) & ~(udata);
-
- __raw_writel(reg_dt, address);
-}
-
-#ifdef UDC_DEBUG_DUMP
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_dump_register(struct nbu2ss_udc *udc)
-{
- int i;
- u32 reg_data;
-
- pr_info("=== %s()\n", __func__);
-
- if (!udc) {
- pr_err("%s udc == NULL\n", __func__);
- return;
- }
-
- spin_unlock(&udc->lock);
-
- dev_dbg(&udc->dev, "\n-USB REG-\n");
- for (i = 0x0 ; i < USB_BASE_SIZE ; i += 16) {
- reg_data = _nbu2ss_readl(IO_ADDRESS(USB_BASE_ADDRESS + i));
- dev_dbg(&udc->dev, "USB%04x =%08x", i, (int)reg_data);
-
- reg_data = _nbu2ss_readl(IO_ADDRESS(USB_BASE_ADDRESS + i + 4));
- dev_dbg(&udc->dev, " %08x", (int)reg_data);
-
- reg_data = _nbu2ss_readl(IO_ADDRESS(USB_BASE_ADDRESS + i + 8));
- dev_dbg(&udc->dev, " %08x", (int)reg_data);
-
- reg_data = _nbu2ss_readl(IO_ADDRESS(USB_BASE_ADDRESS + i + 12));
- dev_dbg(&udc->dev, " %08x\n", (int)reg_data);
- }
-
- spin_lock(&udc->lock);
-}
-#endif /* UDC_DEBUG_DUMP */
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint 0 Callback (Complete) */
-static void _nbu2ss_ep0_complete(struct usb_ep *_ep, struct usb_request *_req)
-{
- u8 recipient;
- u16 selector;
- u16 wIndex;
- u32 test_mode;
- struct usb_ctrlrequest *p_ctrl;
- struct nbu2ss_udc *udc;
-
- if (!_ep || !_req)
- return;
-
- udc = (struct nbu2ss_udc *)_req->context;
- p_ctrl = &udc->ctrl;
- if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
- if (p_ctrl->bRequest == USB_REQ_SET_FEATURE) {
- /*-------------------------------------------------*/
- /* SET_FEATURE */
- recipient = (u8)(p_ctrl->bRequestType & USB_RECIP_MASK);
- selector = le16_to_cpu(p_ctrl->wValue);
- if ((recipient == USB_RECIP_DEVICE) &&
- (selector == USB_DEVICE_TEST_MODE)) {
- wIndex = le16_to_cpu(p_ctrl->wIndex);
- test_mode = (u32)(wIndex >> 8);
- _nbu2ss_set_test_mode(udc, test_mode);
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-/* Initialization usb_request */
-static void _nbu2ss_create_ep0_packet(struct nbu2ss_udc *udc,
- void *p_buf, unsigned int length)
-{
- udc->ep0_req.req.buf = p_buf;
- udc->ep0_req.req.length = length;
- udc->ep0_req.req.dma = 0;
- udc->ep0_req.req.zero = true;
- udc->ep0_req.req.complete = _nbu2ss_ep0_complete;
- udc->ep0_req.req.status = -EINPROGRESS;
- udc->ep0_req.req.context = udc;
- udc->ep0_req.req.actual = 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Acquisition of the first address of RAM(FIFO) */
-static u32 _nbu2ss_get_begin_ram_address(struct nbu2ss_udc *udc)
-{
- u32 num, buf_type;
- u32 data, last_ram_adr, use_ram_size;
-
- struct ep_regs __iomem *p_ep_regs;
-
- last_ram_adr = (D_RAM_SIZE_CTRL / sizeof(u32)) * 2;
- use_ram_size = 0;
-
- for (num = 0; num < NUM_ENDPOINTS - 1; num++) {
- p_ep_regs = &udc->p_regs->EP_REGS[num];
- data = _nbu2ss_readl(&p_ep_regs->EP_PCKT_ADRS);
- buf_type = _nbu2ss_readl(&p_ep_regs->EP_CONTROL) & EPN_BUF_TYPE;
- if (buf_type == 0) {
- /* Single Buffer */
- use_ram_size += (data & EPN_MPKT) / sizeof(u32);
- } else {
- /* Double Buffer */
- use_ram_size += ((data & EPN_MPKT) / sizeof(u32)) * 2;
- }
-
- if ((data >> 16) > last_ram_adr)
- last_ram_adr = data >> 16;
- }
-
- return last_ram_adr + use_ram_size;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Construction of Endpoint */
-static int _nbu2ss_ep_init(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
-{
- u32 num;
- u32 data;
- u32 begin_adrs;
-
- if (ep->epnum == 0)
- return -EINVAL;
-
- num = ep->epnum - 1;
-
- /*-------------------------------------------------------------*/
- /* RAM Transfer Address */
- begin_adrs = _nbu2ss_get_begin_ram_address(udc);
- data = (begin_adrs << 16) | ep->ep.maxpacket;
- _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_PCKT_ADRS, data);
-
- /*-------------------------------------------------------------*/
- /* Interrupt Enable */
- data = 1 << (ep->epnum + 8);
- _nbu2ss_bitset(&udc->p_regs->USB_INT_ENA, data);
-
- /*-------------------------------------------------------------*/
- /* Endpoint Type(Mode) */
- /* Bulk, Interrupt, ISO */
- switch (ep->ep_type) {
- case USB_ENDPOINT_XFER_BULK:
- data = EPN_BULK;
- break;
-
- case USB_ENDPOINT_XFER_INT:
- data = EPN_BUF_SINGLE | EPN_INTERRUPT;
- break;
-
- case USB_ENDPOINT_XFER_ISOC:
- data = EPN_ISO;
- break;
-
- default:
- data = 0;
- break;
- }
-
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
- _nbu2ss_endpoint_toggle_reset(udc, (ep->epnum | ep->direct));
-
- if (ep->direct == USB_DIR_OUT) {
- /*---------------------------------------------------------*/
- /* OUT */
- data = EPN_EN | EPN_BCLR | EPN_DIR0;
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_ONAK | EPN_OSTL_EN | EPN_OSTL;
- _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_OUT_EN | EPN_OUT_END_EN;
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
- } else {
- /*---------------------------------------------------------*/
- /* IN */
- data = EPN_EN | EPN_BCLR | EPN_AUTO;
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_ISTL;
- _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_IN_EN | EPN_IN_END_EN;
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Release of Endpoint */
-static int _nbu2ss_epn_exit(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
-{
- u32 num;
- u32 data;
-
- if ((ep->epnum == 0) || (udc->vbus_active == 0))
- return -EINVAL;
-
- num = ep->epnum - 1;
-
- /*-------------------------------------------------------------*/
- /* RAM Transfer Address */
- _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_PCKT_ADRS, 0);
-
- /*-------------------------------------------------------------*/
- /* Interrupt Disable */
- data = 1 << (ep->epnum + 8);
- _nbu2ss_bitclr(&udc->p_regs->USB_INT_ENA, data);
-
- if (ep->direct == USB_DIR_OUT) {
- /*---------------------------------------------------------*/
- /* OUT */
- data = EPN_ONAK | EPN_BCLR;
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_EN | EPN_DIR0;
- _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_OUT_EN | EPN_OUT_END_EN;
- _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
- } else {
- /*---------------------------------------------------------*/
- /* IN */
- data = EPN_BCLR;
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_EN | EPN_AUTO;
- _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-
- data = EPN_IN_EN | EPN_IN_END_EN;
- _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* DMA setting (without Endpoint 0) */
-static void _nbu2ss_ep_dma_init(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
-{
- u32 num;
- u32 data;
-
- data = _nbu2ss_readl(&udc->p_regs->USBSSCONF);
- if (((ep->epnum == 0) || (data & (1 << ep->epnum)) == 0))
- return; /* Not Support DMA */
-
- num = ep->epnum - 1;
-
- if (ep->direct == USB_DIR_OUT) {
- /*---------------------------------------------------------*/
- /* OUT */
- data = ep->ep.maxpacket;
- _nbu2ss_writel(&udc->p_regs->EP_DCR[num].EP_DCR2, data);
-
- /*---------------------------------------------------------*/
- /* Transfer Direct */
- data = DCR1_EPN_DIR0;
- _nbu2ss_bitset(&udc->p_regs->EP_DCR[num].EP_DCR1, data);
-
- /*---------------------------------------------------------*/
- /* DMA Mode etc. */
- data = EPN_STOP_MODE | EPN_STOP_SET | EPN_DMAMODE0;
- _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_DMA_CTRL, data);
- } else {
- /*---------------------------------------------------------*/
- /* IN */
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, EPN_AUTO);
-
- /*---------------------------------------------------------*/
- /* DMA Mode etc. */
- data = EPN_BURST_SET | EPN_DMAMODE0;
- _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_DMA_CTRL, data);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-/* DMA setting release */
-static void _nbu2ss_ep_dma_exit(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
-{
- u32 num;
- u32 data;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (udc->vbus_active == 0)
- return; /* VBUS OFF */
-
- data = _nbu2ss_readl(&preg->USBSSCONF);
- if ((ep->epnum == 0) || ((data & (1 << ep->epnum)) == 0))
- return; /* Not Support DMA */
-
- num = ep->epnum - 1;
-
- _nbu2ss_ep_dma_abort(udc, ep);
-
- if (ep->direct == USB_DIR_OUT) {
- /*---------------------------------------------------------*/
- /* OUT */
- _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, 0);
- _nbu2ss_bitclr(&preg->EP_DCR[num].EP_DCR1, DCR1_EPN_DIR0);
- _nbu2ss_writel(&preg->EP_REGS[num].EP_DMA_CTRL, 0);
- } else {
- /*---------------------------------------------------------*/
- /* IN */
- _nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL, EPN_AUTO);
- _nbu2ss_writel(&preg->EP_REGS[num].EP_DMA_CTRL, 0);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-/* Abort DMA */
-static void _nbu2ss_ep_dma_abort(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
-{
- struct fc_regs __iomem *preg = udc->p_regs;
-
- _nbu2ss_bitclr(&preg->EP_DCR[ep->epnum - 1].EP_DCR1, DCR1_EPN_REQEN);
- mdelay(DMA_DISABLE_TIME); /* DCR1_EPN_REQEN Clear */
- _nbu2ss_bitclr(&preg->EP_REGS[ep->epnum - 1].EP_DMA_CTRL, EPN_DMA_EN);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Start IN Transfer */
-static void _nbu2ss_ep_in_end(struct nbu2ss_udc *udc,
- u32 epnum, u32 data32, u32 length)
-{
- u32 data;
- u32 num;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (length >= sizeof(u32))
- return;
-
- if (epnum == 0) {
- _nbu2ss_bitclr(&preg->EP0_CONTROL, EP0_AUTO);
-
- /* Writing of 1-4 bytes */
- if (length)
- _nbu2ss_writel(&preg->EP0_WRITE, data32);
-
- data = ((length << 5) & EP0_DW) | EP0_DEND;
- _nbu2ss_writel(&preg->EP0_CONTROL, data);
-
- _nbu2ss_bitset(&preg->EP0_CONTROL, EP0_AUTO);
- } else {
- num = epnum - 1;
-
- _nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL, EPN_AUTO);
-
- /* Writing of 1-4 bytes */
- if (length)
- _nbu2ss_writel(&preg->EP_REGS[num].EP_WRITE, data32);
-
- data = (((length) << 5) & EPN_DW) | EPN_DEND;
- _nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, data);
-
- _nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, EPN_AUTO);
- }
-}
-
-#ifdef USE_DMA
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_dma_map_single(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u8 direct)
-{
- if (req->req.dma == DMA_ADDR_INVALID) {
- if (req->unaligned) {
- req->req.dma = ep->phys_buf;
- } else {
- req->req.dma = dma_map_single(udc->gadget.dev.parent,
- req->req.buf,
- req->req.length,
- (direct == USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
- req->mapped = 1;
- } else {
- if (!req->unaligned)
- dma_sync_single_for_device(udc->gadget.dev.parent,
- req->req.dma,
- req->req.length,
- (direct == USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
-
- req->mapped = 0;
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_dma_unmap_single(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u8 direct)
-{
- u8 data[4];
- u8 *p;
- u32 count = 0;
-
- if (direct == USB_DIR_OUT) {
- count = req->req.actual % 4;
- if (count) {
- p = req->req.buf;
- p += (req->req.actual - count);
- memcpy(data, p, count);
- }
- }
-
- if (req->mapped) {
- if (req->unaligned) {
- if (direct == USB_DIR_OUT)
- memcpy(req->req.buf, ep->virt_buf,
- req->req.actual & 0xfffffffc);
- } else {
- dma_unmap_single(udc->gadget.dev.parent,
- req->req.dma, req->req.length,
- (direct == USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
- req->req.dma = DMA_ADDR_INVALID;
- req->mapped = 0;
- } else {
- if (!req->unaligned)
- dma_sync_single_for_cpu(udc->gadget.dev.parent,
- req->req.dma, req->req.length,
- (direct == USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
-
- if (count) {
- p = req->req.buf;
- p += (req->req.actual - count);
- memcpy(p, data, count);
- }
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint 0 OUT Transfer (PIO) */
-static int ep0_out_pio(struct nbu2ss_udc *udc, u8 *buf, u32 length)
-{
- u32 i;
- u32 numreads = length / sizeof(u32);
- union usb_reg_access *buf32 = (union usb_reg_access *)buf;
-
- if (!numreads)
- return 0;
-
- /* PIO Read */
- for (i = 0; i < numreads; i++) {
- buf32->dw = _nbu2ss_readl(&udc->p_regs->EP0_READ);
- buf32++;
- }
-
- return numreads * sizeof(u32);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint 0 OUT Transfer (PIO, OverBytes) */
-static int ep0_out_overbytes(struct nbu2ss_udc *udc, u8 *p_buf, u32 length)
-{
- u32 i;
- u32 i_read_size = 0;
- union usb_reg_access temp_32;
- union usb_reg_access *p_buf_32 = (union usb_reg_access *)p_buf;
-
- if ((length > 0) && (length < sizeof(u32))) {
- temp_32.dw = _nbu2ss_readl(&udc->p_regs->EP0_READ);
- for (i = 0 ; i < length ; i++)
- p_buf_32->byte.DATA[i] = temp_32.byte.DATA[i];
- i_read_size += length;
- }
-
- return i_read_size;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint 0 IN Transfer (PIO) */
-static int EP0_in_PIO(struct nbu2ss_udc *udc, u8 *p_buf, u32 length)
-{
- u32 i;
- u32 i_max_length = EP0_PACKETSIZE;
- u32 i_word_length = 0;
- u32 i_write_length = 0;
- union usb_reg_access *p_buf_32 = (union usb_reg_access *)p_buf;
-
- /*------------------------------------------------------------*/
- /* Transfer Length */
- if (i_max_length < length)
- i_word_length = i_max_length / sizeof(u32);
- else
- i_word_length = length / sizeof(u32);
-
- /*------------------------------------------------------------*/
- /* PIO */
- for (i = 0; i < i_word_length; i++) {
- _nbu2ss_writel(&udc->p_regs->EP0_WRITE, p_buf_32->dw);
- p_buf_32++;
- i_write_length += sizeof(u32);
- }
-
- return i_write_length;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint 0 IN Transfer (PIO, OverBytes) */
-static int ep0_in_overbytes(struct nbu2ss_udc *udc,
- u8 *p_buf,
- u32 i_remain_size)
-{
- u32 i;
- union usb_reg_access temp_32;
- union usb_reg_access *p_buf_32 = (union usb_reg_access *)p_buf;
-
- if ((i_remain_size > 0) && (i_remain_size < sizeof(u32))) {
- for (i = 0 ; i < i_remain_size ; i++)
- temp_32.byte.DATA[i] = p_buf_32->byte.DATA[i];
- _nbu2ss_ep_in_end(udc, 0, temp_32.dw, i_remain_size);
-
- return i_remain_size;
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Transfer NULL Packet (Epndoint 0) */
-static int EP0_send_NULL(struct nbu2ss_udc *udc, bool pid_flag)
-{
- u32 data;
-
- data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
- data &= ~(u32)EP0_INAK;
-
- if (pid_flag)
- data |= (EP0_INAK_EN | EP0_PIDCLR | EP0_DEND);
- else
- data |= (EP0_INAK_EN | EP0_DEND);
-
- _nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Receive NULL Packet (Endpoint 0) */
-static int EP0_receive_NULL(struct nbu2ss_udc *udc, bool pid_flag)
-{
- u32 data;
-
- data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
- data &= ~(u32)EP0_ONAK;
-
- if (pid_flag)
- data |= EP0_PIDCLR;
-
- _nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_ep0_in_transfer(struct nbu2ss_udc *udc,
- struct nbu2ss_req *req)
-{
- u8 *p_buffer; /* IN Data Buffer */
- u32 data;
- u32 i_remain_size = 0;
- int result = 0;
-
- /*-------------------------------------------------------------*/
- /* End confirmation */
- if (req->req.actual == req->req.length) {
- if ((req->req.actual % EP0_PACKETSIZE) == 0) {
- if (req->zero) {
- req->zero = false;
- EP0_send_NULL(udc, false);
- return 1;
- }
- }
-
- return 0; /* Transfer End */
- }
-
- /*-------------------------------------------------------------*/
- /* NAK release */
- data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
- data |= EP0_INAK_EN;
- data &= ~(u32)EP0_INAK;
- _nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
-
- i_remain_size = req->req.length - req->req.actual;
- p_buffer = (u8 *)req->req.buf;
- p_buffer += req->req.actual;
-
- /*-------------------------------------------------------------*/
- /* Data transfer */
- result = EP0_in_PIO(udc, p_buffer, i_remain_size);
-
- req->div_len = result;
- i_remain_size -= result;
-
- if (i_remain_size == 0) {
- EP0_send_NULL(udc, false);
- return result;
- }
-
- if ((i_remain_size < sizeof(u32)) && (result != EP0_PACKETSIZE)) {
- p_buffer += result;
- result += ep0_in_overbytes(udc, p_buffer, i_remain_size);
- req->div_len = result;
- }
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_ep0_out_transfer(struct nbu2ss_udc *udc,
- struct nbu2ss_req *req)
-{
- u8 *p_buffer;
- u32 i_remain_size;
- u32 i_recv_length;
- int result = 0;
- int f_rcv_zero;
-
- /*-------------------------------------------------------------*/
- /* Receive data confirmation */
- i_recv_length = _nbu2ss_readl(&udc->p_regs->EP0_LENGTH) & EP0_LDATA;
- if (i_recv_length != 0) {
- f_rcv_zero = 0;
-
- i_remain_size = req->req.length - req->req.actual;
- p_buffer = (u8 *)req->req.buf;
- p_buffer += req->req.actual;
-
- result = ep0_out_pio(udc, p_buffer
- , min(i_remain_size, i_recv_length));
- if (result < 0)
- return result;
-
- req->req.actual += result;
- i_recv_length -= result;
-
- if ((i_recv_length > 0) && (i_recv_length < sizeof(u32))) {
- p_buffer += result;
- i_remain_size -= result;
-
- result = ep0_out_overbytes(udc, p_buffer
- , min(i_remain_size, i_recv_length));
- req->req.actual += result;
- }
- } else {
- f_rcv_zero = 1;
- }
-
- /*-------------------------------------------------------------*/
- /* End confirmation */
- if (req->req.actual == req->req.length) {
- if ((req->req.actual % EP0_PACKETSIZE) == 0) {
- if (req->zero) {
- req->zero = false;
- EP0_receive_NULL(udc, false);
- return 1;
- }
- }
-
- return 0; /* Transfer End */
- }
-
- if ((req->req.actual % EP0_PACKETSIZE) != 0)
- return 0; /* Short Packet Transfer End */
-
- if (req->req.actual > req->req.length) {
- dev_err(udc->dev, " *** Overrun Error\n");
- return -EOVERFLOW;
- }
-
- if (f_rcv_zero != 0) {
- i_remain_size = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
- if (i_remain_size & EP0_ONAK) {
- /*---------------------------------------------------*/
- /* NACK release */
- _nbu2ss_bitclr(&udc->p_regs->EP0_CONTROL, EP0_ONAK);
- }
- result = 1;
- }
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_out_dma(struct nbu2ss_udc *udc, struct nbu2ss_req *req,
- u32 num, u32 length)
-{
- dma_addr_t p_buffer;
- u32 mpkt;
- u32 lmpkt;
- u32 dmacnt;
- u32 burst = 1;
- u32 data;
- int result;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (req->dma_flag)
- return 1; /* DMA is forwarded */
-
- req->dma_flag = true;
- p_buffer = req->req.dma;
- p_buffer += req->req.actual;
-
- /* DMA Address */
- _nbu2ss_writel(&preg->EP_DCR[num].EP_TADR, (u32)p_buffer);
-
- /* Number of transfer packets */
- mpkt = _nbu2ss_readl(&preg->EP_REGS[num].EP_PCKT_ADRS) & EPN_MPKT;
- dmacnt = length / mpkt;
- lmpkt = (length % mpkt) & ~(u32)0x03;
-
- if (dmacnt > DMA_MAX_COUNT) {
- dmacnt = DMA_MAX_COUNT;
- lmpkt = 0;
- } else if (lmpkt != 0) {
- if (dmacnt == 0)
- burst = 0; /* Burst OFF */
- dmacnt++;
- }
-
- data = mpkt | (lmpkt << 16);
- _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, data);
-
- data = ((dmacnt & 0xff) << 16) | DCR1_EPN_DIR0 | DCR1_EPN_REQEN;
- _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR1, data);
-
- if (burst == 0) {
- _nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT, 0);
- _nbu2ss_bitclr(&preg->EP_REGS[num].EP_DMA_CTRL, EPN_BURST_SET);
- } else {
- _nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT
- , (dmacnt << 16));
- _nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPN_BURST_SET);
- }
- _nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPN_DMA_EN);
-
- result = length & ~(u32)0x03;
- req->div_len = result;
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_epn_out_pio(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u32 length)
-{
- u8 *p_buffer;
- u32 i;
- u32 data;
- u32 i_word_length;
- union usb_reg_access temp_32;
- union usb_reg_access *p_buf_32;
- int result = 0;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (req->dma_flag)
- return 1; /* DMA is forwarded */
-
- if (length == 0)
- return 0;
-
- p_buffer = (u8 *)req->req.buf;
- p_buf_32 = (union usb_reg_access *)(p_buffer + req->req.actual);
-
- i_word_length = length / sizeof(u32);
- if (i_word_length > 0) {
- /*---------------------------------------------------------*/
- /* Copy of every four bytes */
- for (i = 0; i < i_word_length; i++) {
- p_buf_32->dw =
- _nbu2ss_readl(&preg->EP_REGS[ep->epnum - 1].EP_READ);
- p_buf_32++;
- }
- result = i_word_length * sizeof(u32);
- }
-
- data = length - result;
- if (data > 0) {
- /*---------------------------------------------------------*/
- /* Copy of fraction byte */
- temp_32.dw =
- _nbu2ss_readl(&preg->EP_REGS[ep->epnum - 1].EP_READ);
- for (i = 0 ; i < data ; i++)
- p_buf_32->byte.DATA[i] = temp_32.byte.DATA[i];
- result += data;
- }
-
- req->req.actual += result;
-
- if ((req->req.actual == req->req.length) ||
- ((req->req.actual % ep->ep.maxpacket) != 0)) {
- result = 0;
- }
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_epn_out_data(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u32 data_size)
-{
- u32 num;
- u32 i_buf_size;
- int nret = 1;
-
- if (ep->epnum == 0)
- return -EINVAL;
-
- num = ep->epnum - 1;
-
- i_buf_size = min((req->req.length - req->req.actual), data_size);
-
- if ((ep->ep_type != USB_ENDPOINT_XFER_INT) && (req->req.dma != 0) &&
- (i_buf_size >= sizeof(u32))) {
- nret = _nbu2ss_out_dma(udc, req, num, i_buf_size);
- } else {
- i_buf_size = min_t(u32, i_buf_size, ep->ep.maxpacket);
- nret = _nbu2ss_epn_out_pio(udc, ep, req, i_buf_size);
- }
-
- return nret;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_epn_out_transfer(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req)
-{
- u32 num;
- u32 i_recv_length;
- int result = 1;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (ep->epnum == 0)
- return -EINVAL;
-
- num = ep->epnum - 1;
-
- /*-------------------------------------------------------------*/
- /* Receive Length */
- i_recv_length =
- _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT) & EPN_LDATA;
-
- if (i_recv_length != 0) {
- result = _nbu2ss_epn_out_data(udc, ep, req, i_recv_length);
- if (i_recv_length < ep->ep.maxpacket) {
- if (i_recv_length == result) {
- req->req.actual += result;
- result = 0;
- }
- }
- } else {
- if ((req->req.actual == req->req.length) ||
- ((req->req.actual % ep->ep.maxpacket) != 0)) {
- result = 0;
- }
- }
-
- if (result == 0) {
- if ((req->req.actual % ep->ep.maxpacket) == 0) {
- if (req->zero) {
- req->zero = false;
- return 1;
- }
- }
- }
-
- if (req->req.actual > req->req.length) {
- dev_err(udc->dev, " Overrun Error\n");
- dev_err(udc->dev, " actual = %d, length = %d\n",
- req->req.actual, req->req.length);
- result = -EOVERFLOW;
- }
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_in_dma(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u32 num, u32 length)
-{
- dma_addr_t p_buffer;
- u32 mpkt; /* MaxPacketSize */
- u32 lmpkt; /* Last Packet Data Size */
- u32 dmacnt; /* IN Data Size */
- u32 i_write_length;
- u32 data;
- int result = -EINVAL;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (req->dma_flag)
- return 1; /* DMA is forwarded */
-
-#ifdef USE_DMA
- if (req->req.actual == 0)
- _nbu2ss_dma_map_single(udc, ep, req, USB_DIR_IN);
-#endif
- req->dma_flag = true;
-
- /* MAX Packet Size */
- mpkt = _nbu2ss_readl(&preg->EP_REGS[num].EP_PCKT_ADRS) & EPN_MPKT;
-
- i_write_length = min(DMA_MAX_COUNT * mpkt, length);
-
- /*------------------------------------------------------------*/
- /* Number of transmission packets */
- if (mpkt < i_write_length) {
- dmacnt = i_write_length / mpkt;
- lmpkt = (i_write_length % mpkt) & ~(u32)0x3;
- if (lmpkt != 0)
- dmacnt++;
- else
- lmpkt = mpkt & ~(u32)0x3;
-
- } else {
- dmacnt = 1;
- lmpkt = i_write_length & ~(u32)0x3;
- }
-
- /* Packet setting */
- data = mpkt | (lmpkt << 16);
- _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, data);
-
- /* Address setting */
- p_buffer = req->req.dma;
- p_buffer += req->req.actual;
- _nbu2ss_writel(&preg->EP_DCR[num].EP_TADR, (u32)p_buffer);
-
- /* Packet and DMA setting */
- data = ((dmacnt & 0xff) << 16) | DCR1_EPN_REQEN;
- _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR1, data);
-
- /* Packet setting of EPC */
- data = dmacnt << 16;
- _nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT, data);
-
- /*DMA setting of EPC */
- _nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPN_DMA_EN);
-
- result = i_write_length & ~(u32)0x3;
- req->div_len = result;
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_epn_in_pio(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u32 length)
-{
- u8 *p_buffer;
- u32 i;
- u32 data;
- u32 i_word_length;
- union usb_reg_access temp_32;
- union usb_reg_access *p_buf_32 = NULL;
- int result = 0;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (req->dma_flag)
- return 1; /* DMA is forwarded */
-
- if (length > 0) {
- p_buffer = (u8 *)req->req.buf;
- p_buf_32 = (union usb_reg_access *)(p_buffer + req->req.actual);
-
- i_word_length = length / sizeof(u32);
- if (i_word_length > 0) {
- for (i = 0; i < i_word_length; i++) {
- _nbu2ss_writel(&preg->EP_REGS[ep->epnum - 1].EP_WRITE,
- p_buf_32->dw);
-
- p_buf_32++;
- }
- result = i_word_length * sizeof(u32);
- }
- }
-
- if (result != ep->ep.maxpacket) {
- data = length - result;
- temp_32.dw = 0;
- for (i = 0 ; i < data ; i++)
- temp_32.byte.DATA[i] = p_buf_32->byte.DATA[i];
-
- _nbu2ss_ep_in_end(udc, ep->epnum, temp_32.dw, data);
- result += data;
- }
-
- req->div_len = result;
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_epn_in_data(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep,
- struct nbu2ss_req *req, u32 data_size)
-{
- u32 num;
- int nret = 1;
-
- if (ep->epnum == 0)
- return -EINVAL;
-
- num = ep->epnum - 1;
-
- if ((ep->ep_type != USB_ENDPOINT_XFER_INT) && (req->req.dma != 0) &&
- (data_size >= sizeof(u32))) {
- nret = _nbu2ss_in_dma(udc, ep, req, num, data_size);
- } else {
- data_size = min_t(u32, data_size, ep->ep.maxpacket);
- nret = _nbu2ss_epn_in_pio(udc, ep, req, data_size);
- }
-
- return nret;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_epn_in_transfer(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep, struct nbu2ss_req *req)
-{
- u32 num;
- u32 i_buf_size;
- int result = 0;
- u32 status;
-
- if (ep->epnum == 0)
- return -EINVAL;
-
- num = ep->epnum - 1;
-
- status = _nbu2ss_readl(&udc->p_regs->EP_REGS[num].EP_STATUS);
-
- /*-------------------------------------------------------------*/
- /* State confirmation of FIFO */
- if (req->req.actual == 0) {
- if ((status & EPN_IN_EMPTY) == 0)
- return 1; /* Not Empty */
-
- } else {
- if ((status & EPN_IN_FULL) != 0)
- return 1; /* Not Empty */
- }
-
- /*-------------------------------------------------------------*/
- /* Start transfer */
- i_buf_size = req->req.length - req->req.actual;
- if (i_buf_size > 0)
- result = _nbu2ss_epn_in_data(udc, ep, req, i_buf_size);
- else if (req->req.length == 0)
- _nbu2ss_zero_len_pkt(udc, ep->epnum);
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_start_transfer(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req,
- bool bflag)
-{
- int nret = -EINVAL;
-
- req->dma_flag = false;
- req->div_len = 0;
-
- if (req->req.length == 0) {
- req->zero = false;
- } else {
- if ((req->req.length % ep->ep.maxpacket) == 0)
- req->zero = req->req.zero;
- else
- req->zero = false;
- }
-
- if (ep->epnum == 0) {
- /* EP0 */
- switch (udc->ep0state) {
- case EP0_IN_DATA_PHASE:
- nret = _nbu2ss_ep0_in_transfer(udc, req);
- break;
-
- case EP0_OUT_DATA_PHASE:
- nret = _nbu2ss_ep0_out_transfer(udc, req);
- break;
-
- case EP0_IN_STATUS_PHASE:
- nret = EP0_send_NULL(udc, true);
- break;
-
- default:
- break;
- }
-
- } else {
- /* EPN */
- if (ep->direct == USB_DIR_OUT) {
- /* OUT */
- if (!bflag)
- nret = _nbu2ss_epn_out_transfer(udc, ep, req);
- } else {
- /* IN */
- nret = _nbu2ss_epn_in_transfer(udc, ep, req);
- }
- }
-
- return nret;
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_restert_transfer(struct nbu2ss_ep *ep)
-{
- u32 length;
- bool bflag = false;
- struct nbu2ss_req *req;
-
- req = list_first_entry_or_null(&ep->queue, struct nbu2ss_req, queue);
- if (!req)
- return;
-
- if (ep->epnum > 0) {
- length = _nbu2ss_readl(&ep->udc->p_regs->EP_REGS[ep->epnum - 1].EP_LEN_DCNT);
-
- length &= EPN_LDATA;
- if (length < ep->ep.maxpacket)
- bflag = true;
- }
-
- _nbu2ss_start_transfer(ep->udc, ep, req, bflag);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint Toggle Reset */
-static void _nbu2ss_endpoint_toggle_reset(struct nbu2ss_udc *udc, u8 ep_adrs)
-{
- u8 num;
- u32 data;
-
- if ((ep_adrs == 0) || (ep_adrs == 0x80))
- return;
-
- num = (ep_adrs & 0x7F) - 1;
-
- if (ep_adrs & USB_DIR_IN)
- data = EPN_IPIDCLR;
- else
- data = EPN_BCLR | EPN_OPIDCLR;
-
- _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
-}
-
-/*-------------------------------------------------------------------------*/
-/* Endpoint STALL set */
-static void _nbu2ss_set_endpoint_stall(struct nbu2ss_udc *udc,
- u8 ep_adrs, bool bstall)
-{
- u8 num, epnum;
- u32 data;
- struct nbu2ss_ep *ep;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if ((ep_adrs == 0) || (ep_adrs == 0x80)) {
- if (bstall) {
- /* Set STALL */
- _nbu2ss_bitset(&preg->EP0_CONTROL, EP0_STL);
- } else {
- /* Clear STALL */
- _nbu2ss_bitclr(&preg->EP0_CONTROL, EP0_STL);
- }
- } else {
- epnum = ep_adrs & USB_ENDPOINT_NUMBER_MASK;
- num = epnum - 1;
- ep = &udc->ep[epnum];
-
- if (bstall) {
- /* Set STALL */
- ep->halted = true;
-
- if (ep_adrs & USB_DIR_IN)
- data = EPN_BCLR | EPN_ISTL;
- else
- data = EPN_OSTL_EN | EPN_OSTL;
-
- _nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, data);
- } else {
- if (ep_adrs & USB_DIR_IN) {
- _nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL
- , EPN_ISTL);
- } else {
- data =
- _nbu2ss_readl(&preg->EP_REGS[num].EP_CONTROL);
-
- data &= ~EPN_OSTL;
- data |= EPN_OSTL_EN;
-
- _nbu2ss_writel(&preg->EP_REGS[num].EP_CONTROL
- , data);
- }
-
- /* Clear STALL */
- ep->stalled = false;
- if (ep->halted) {
- ep->halted = false;
- _nbu2ss_restert_transfer(ep);
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_set_test_mode(struct nbu2ss_udc *udc, u32 mode)
-{
- u32 data;
-
- if (mode > MAX_TEST_MODE_NUM)
- return;
-
- dev_info(udc->dev, "SET FEATURE : test mode = %d\n", mode);
-
- data = _nbu2ss_readl(&udc->p_regs->USB_CONTROL);
- data &= ~TEST_FORCE_ENABLE;
- data |= mode << TEST_MODE_SHIFT;
-
- _nbu2ss_writel(&udc->p_regs->USB_CONTROL, data);
- _nbu2ss_bitset(&udc->p_regs->TEST_CONTROL, CS_TESTMODEEN);
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_set_feature_device(struct nbu2ss_udc *udc,
- u16 selector, u16 wIndex)
-{
- int result = -EOPNOTSUPP;
-
- switch (selector) {
- case USB_DEVICE_REMOTE_WAKEUP:
- if (wIndex == 0x0000) {
- udc->remote_wakeup = U2F_ENABLE;
- result = 0;
- }
- break;
-
- case USB_DEVICE_TEST_MODE:
- wIndex >>= 8;
- if (wIndex <= MAX_TEST_MODE_NUM)
- result = 0;
- break;
-
- default:
- break;
- }
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_get_ep_stall(struct nbu2ss_udc *udc, u8 ep_adrs)
-{
- u8 epnum;
- u32 data = 0, bit_data;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- epnum = ep_adrs & ~USB_ENDPOINT_DIR_MASK;
- if (epnum == 0) {
- data = _nbu2ss_readl(&preg->EP0_CONTROL);
- bit_data = EP0_STL;
-
- } else {
- data = _nbu2ss_readl(&preg->EP_REGS[epnum - 1].EP_CONTROL);
- if ((data & EPN_EN) == 0)
- return -1;
-
- if (ep_adrs & USB_ENDPOINT_DIR_MASK)
- bit_data = EPN_ISTL;
- else
- bit_data = EPN_OSTL;
- }
-
- if ((data & bit_data) == 0)
- return 0;
- return 1;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline int _nbu2ss_req_feature(struct nbu2ss_udc *udc, bool bset)
-{
- u8 recipient = (u8)(udc->ctrl.bRequestType & USB_RECIP_MASK);
- u8 direction = (u8)(udc->ctrl.bRequestType & USB_DIR_IN);
- u16 selector = le16_to_cpu(udc->ctrl.wValue);
- u16 wIndex = le16_to_cpu(udc->ctrl.wIndex);
- u8 ep_adrs;
- int result = -EOPNOTSUPP;
-
- if ((udc->ctrl.wLength != 0x0000) ||
- (direction != USB_DIR_OUT)) {
- return -EINVAL;
- }
-
- switch (recipient) {
- case USB_RECIP_DEVICE:
- if (bset)
- result =
- _nbu2ss_set_feature_device(udc, selector, wIndex);
- break;
-
- case USB_RECIP_ENDPOINT:
- if (0x0000 == (wIndex & 0xFF70)) {
- if (selector == USB_ENDPOINT_HALT) {
- ep_adrs = wIndex & 0xFF;
- if (!bset) {
- _nbu2ss_endpoint_toggle_reset(udc,
- ep_adrs);
- }
-
- _nbu2ss_set_endpoint_stall(udc, ep_adrs, bset);
-
- result = 0;
- }
- }
- break;
-
- default:
- break;
- }
-
- if (result >= 0)
- _nbu2ss_create_ep0_packet(udc, udc->ep0_buf, 0);
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline enum usb_device_speed _nbu2ss_get_speed(struct nbu2ss_udc *udc)
-{
- u32 data;
- enum usb_device_speed speed = USB_SPEED_FULL;
-
- data = _nbu2ss_readl(&udc->p_regs->USB_STATUS);
- if (data & HIGH_SPEED)
- speed = USB_SPEED_HIGH;
-
- return speed;
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_epn_set_stall(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep)
-{
- u8 ep_adrs;
- u32 regdata;
- int limit_cnt = 0;
-
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (ep->direct == USB_DIR_IN) {
- for (limit_cnt = 0
- ; limit_cnt < IN_DATA_EMPTY_COUNT
- ; limit_cnt++) {
- regdata = _nbu2ss_readl(&preg->EP_REGS[ep->epnum - 1].EP_STATUS);
-
- if ((regdata & EPN_IN_DATA) == 0)
- break;
-
- mdelay(1);
- }
- }
-
- ep_adrs = ep->epnum | ep->direct;
- _nbu2ss_set_endpoint_stall(udc, ep_adrs, 1);
-}
-
-/*-------------------------------------------------------------------------*/
-static int std_req_get_status(struct nbu2ss_udc *udc)
-{
- u32 length;
- u16 status_data = 0;
- u8 recipient = (u8)(udc->ctrl.bRequestType & USB_RECIP_MASK);
- u8 direction = (u8)(udc->ctrl.bRequestType & USB_DIR_IN);
- u8 ep_adrs;
- int result = -EINVAL;
-
- if ((udc->ctrl.wValue != 0x0000) || (direction != USB_DIR_IN))
- return result;
-
- length =
- min_t(u16, le16_to_cpu(udc->ctrl.wLength), sizeof(status_data));
- switch (recipient) {
- case USB_RECIP_DEVICE:
- if (udc->ctrl.wIndex == 0x0000) {
- if (udc->gadget.is_selfpowered)
- status_data |= BIT(USB_DEVICE_SELF_POWERED);
-
- if (udc->remote_wakeup)
- status_data |= BIT(USB_DEVICE_REMOTE_WAKEUP);
-
- result = 0;
- }
- break;
-
- case USB_RECIP_ENDPOINT:
- if (0x0000 == (le16_to_cpu(udc->ctrl.wIndex) & 0xFF70)) {
- ep_adrs = (u8)(le16_to_cpu(udc->ctrl.wIndex) & 0xFF);
- result = _nbu2ss_get_ep_stall(udc, ep_adrs);
-
- if (result > 0)
- status_data |= BIT(USB_ENDPOINT_HALT);
- }
- break;
-
- default:
- break;
- }
-
- if (result >= 0) {
- memcpy(udc->ep0_buf, &status_data, length);
- _nbu2ss_create_ep0_packet(udc, udc->ep0_buf, length);
- _nbu2ss_ep0_in_transfer(udc, &udc->ep0_req);
-
- } else {
- dev_err(udc->dev, " Error GET_STATUS\n");
- }
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int std_req_clear_feature(struct nbu2ss_udc *udc)
-{
- return _nbu2ss_req_feature(udc, false);
-}
-
-/*-------------------------------------------------------------------------*/
-static int std_req_set_feature(struct nbu2ss_udc *udc)
-{
- return _nbu2ss_req_feature(udc, true);
-}
-
-/*-------------------------------------------------------------------------*/
-static int std_req_set_address(struct nbu2ss_udc *udc)
-{
- int result = 0;
- u32 wValue = le16_to_cpu(udc->ctrl.wValue);
-
- if ((udc->ctrl.bRequestType != 0x00) ||
- (udc->ctrl.wIndex != 0x0000) ||
- (udc->ctrl.wLength != 0x0000)) {
- return -EINVAL;
- }
-
- if (wValue != (wValue & 0x007F))
- return -EINVAL;
-
- wValue <<= USB_ADRS_SHIFT;
-
- _nbu2ss_writel(&udc->p_regs->USB_ADDRESS, wValue);
- _nbu2ss_create_ep0_packet(udc, udc->ep0_buf, 0);
-
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-static int std_req_set_configuration(struct nbu2ss_udc *udc)
-{
- u32 config_value = (u32)(le16_to_cpu(udc->ctrl.wValue) & 0x00ff);
-
- if ((udc->ctrl.wIndex != 0x0000) ||
- (udc->ctrl.wLength != 0x0000) ||
- (udc->ctrl.bRequestType != 0x00)) {
- return -EINVAL;
- }
-
- udc->curr_config = config_value;
-
- if (config_value > 0) {
- _nbu2ss_bitset(&udc->p_regs->USB_CONTROL, CONF);
- udc->devstate = USB_STATE_CONFIGURED;
-
- } else {
- _nbu2ss_bitclr(&udc->p_regs->USB_CONTROL, CONF);
- udc->devstate = USB_STATE_ADDRESS;
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_read_request_data(struct nbu2ss_udc *udc, u32 *pdata)
-{
- *pdata = _nbu2ss_readl(&udc->p_regs->SETUP_DATA0);
- pdata++;
- *pdata = _nbu2ss_readl(&udc->p_regs->SETUP_DATA1);
-}
-
-/*-------------------------------------------------------------------------*/
-static inline int _nbu2ss_decode_request(struct nbu2ss_udc *udc)
-{
- bool bcall_back = true;
- int nret = -EINVAL;
- struct usb_ctrlrequest *p_ctrl;
-
- p_ctrl = &udc->ctrl;
- _nbu2ss_read_request_data(udc, (u32 *)p_ctrl);
-
- /* ep0 state control */
- if (p_ctrl->wLength == 0) {
- udc->ep0state = EP0_IN_STATUS_PHASE;
-
- } else {
- if (p_ctrl->bRequestType & USB_DIR_IN)
- udc->ep0state = EP0_IN_DATA_PHASE;
- else
- udc->ep0state = EP0_OUT_DATA_PHASE;
- }
-
- if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
- switch (p_ctrl->bRequest) {
- case USB_REQ_GET_STATUS:
- nret = std_req_get_status(udc);
- bcall_back = false;
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- nret = std_req_clear_feature(udc);
- bcall_back = false;
- break;
-
- case USB_REQ_SET_FEATURE:
- nret = std_req_set_feature(udc);
- bcall_back = false;
- break;
-
- case USB_REQ_SET_ADDRESS:
- nret = std_req_set_address(udc);
- bcall_back = false;
- break;
-
- case USB_REQ_SET_CONFIGURATION:
- nret = std_req_set_configuration(udc);
- break;
-
- default:
- break;
- }
- }
-
- if (!bcall_back) {
- if (udc->ep0state == EP0_IN_STATUS_PHASE) {
- if (nret >= 0) {
- /*--------------------------------------*/
- /* Status Stage */
- nret = EP0_send_NULL(udc, true);
- }
- }
-
- } else {
- spin_unlock(&udc->lock);
- nret = udc->driver->setup(&udc->gadget, &udc->ctrl);
- spin_lock(&udc->lock);
- }
-
- if (nret < 0)
- udc->ep0state = EP0_IDLE;
-
- return nret;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline int _nbu2ss_ep0_in_data_stage(struct nbu2ss_udc *udc)
-{
- int nret;
- struct nbu2ss_req *req;
- struct nbu2ss_ep *ep = &udc->ep[0];
-
- req = list_first_entry_or_null(&ep->queue, struct nbu2ss_req, queue);
- if (!req)
- req = &udc->ep0_req;
-
- req->req.actual += req->div_len;
- req->div_len = 0;
-
- nret = _nbu2ss_ep0_in_transfer(udc, req);
- if (nret == 0) {
- udc->ep0state = EP0_OUT_STATUS_PAHSE;
- EP0_receive_NULL(udc, true);
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline int _nbu2ss_ep0_out_data_stage(struct nbu2ss_udc *udc)
-{
- int nret;
- struct nbu2ss_req *req;
- struct nbu2ss_ep *ep = &udc->ep[0];
-
- req = list_first_entry_or_null(&ep->queue, struct nbu2ss_req, queue);
- if (!req)
- req = &udc->ep0_req;
-
- nret = _nbu2ss_ep0_out_transfer(udc, req);
- if (nret == 0) {
- udc->ep0state = EP0_IN_STATUS_PHASE;
- EP0_send_NULL(udc, true);
-
- } else if (nret < 0) {
- _nbu2ss_bitset(&udc->p_regs->EP0_CONTROL, EP0_BCLR);
- req->req.status = nret;
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline int _nbu2ss_ep0_status_stage(struct nbu2ss_udc *udc)
-{
- struct nbu2ss_req *req;
- struct nbu2ss_ep *ep = &udc->ep[0];
-
- req = list_first_entry_or_null(&ep->queue, struct nbu2ss_req, queue);
- if (!req) {
- req = &udc->ep0_req;
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
-
- } else {
- if (req->req.complete)
- _nbu2ss_ep_done(ep, req, 0);
- }
-
- udc->ep0state = EP0_IDLE;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_ep0_int(struct nbu2ss_udc *udc)
-{
- int i;
- u32 status;
- u32 intr;
- int nret = -1;
-
- status = _nbu2ss_readl(&udc->p_regs->EP0_STATUS);
- intr = status & EP0_STATUS_RW_BIT;
- _nbu2ss_writel(&udc->p_regs->EP0_STATUS, ~intr);
-
- status &= (SETUP_INT | EP0_IN_INT | EP0_OUT_INT
- | STG_END_INT | EP0_OUT_NULL_INT);
-
- if (status == 0) {
- dev_info(udc->dev, "%s Not Decode Interrupt\n", __func__);
- dev_info(udc->dev, "EP0_STATUS = 0x%08x\n", intr);
- return;
- }
-
- if (udc->gadget.speed == USB_SPEED_UNKNOWN)
- udc->gadget.speed = _nbu2ss_get_speed(udc);
-
- for (i = 0; i < EP0_END_XFER; i++) {
- switch (udc->ep0state) {
- case EP0_IDLE:
- if (status & SETUP_INT) {
- status = 0;
- nret = _nbu2ss_decode_request(udc);
- }
- break;
-
- case EP0_IN_DATA_PHASE:
- if (status & EP0_IN_INT) {
- status &= ~EP0_IN_INT;
- nret = _nbu2ss_ep0_in_data_stage(udc);
- }
- break;
-
- case EP0_OUT_DATA_PHASE:
- if (status & EP0_OUT_INT) {
- status &= ~EP0_OUT_INT;
- nret = _nbu2ss_ep0_out_data_stage(udc);
- }
- break;
-
- case EP0_IN_STATUS_PHASE:
- if ((status & STG_END_INT) || (status & SETUP_INT)) {
- status &= ~(STG_END_INT | EP0_IN_INT);
- nret = _nbu2ss_ep0_status_stage(udc);
- }
- break;
-
- case EP0_OUT_STATUS_PAHSE:
- if ((status & STG_END_INT) || (status & SETUP_INT) ||
- (status & EP0_OUT_NULL_INT)) {
- status &= ~(STG_END_INT
- | EP0_OUT_INT
- | EP0_OUT_NULL_INT);
-
- nret = _nbu2ss_ep0_status_stage(udc);
- }
-
- break;
-
- default:
- status = 0;
- break;
- }
-
- if (status == 0)
- break;
- }
-
- if (nret < 0) {
- /* Send Stall */
- _nbu2ss_set_endpoint_stall(udc, 0, true);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_ep_done(struct nbu2ss_ep *ep,
- struct nbu2ss_req *req,
- int status)
-{
- struct nbu2ss_udc *udc = ep->udc;
-
- list_del_init(&req->queue);
-
- if (status == -ECONNRESET)
- _nbu2ss_fifo_flush(udc, ep);
-
- if (likely(req->req.status == -EINPROGRESS))
- req->req.status = status;
-
- if (ep->stalled) {
- _nbu2ss_epn_set_stall(udc, ep);
- } else {
- if (!list_empty(&ep->queue))
- _nbu2ss_restert_transfer(ep);
- }
-
-#ifdef USE_DMA
- if ((ep->direct == USB_DIR_OUT) && (ep->epnum > 0) &&
- (req->req.dma != 0))
- _nbu2ss_dma_unmap_single(udc, ep, req, USB_DIR_OUT);
-#endif
-
- spin_unlock(&udc->lock);
- req->req.complete(&ep->ep, &req->req);
- spin_lock(&udc->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_epn_in_int(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req)
-{
- int result = 0;
- u32 status;
-
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (req->dma_flag)
- return; /* DMA is forwarded */
-
- req->req.actual += req->div_len;
- req->div_len = 0;
-
- if (req->req.actual != req->req.length) {
- /*---------------------------------------------------------*/
- /* remainder of data */
- result = _nbu2ss_epn_in_transfer(udc, ep, req);
-
- } else {
- if (req->zero && ((req->req.actual % ep->ep.maxpacket) == 0)) {
- status =
- _nbu2ss_readl(&preg->EP_REGS[ep->epnum - 1].EP_STATUS);
-
- if ((status & EPN_IN_FULL) == 0) {
- /*-----------------------------------------*/
- /* 0 Length Packet */
- req->zero = false;
- _nbu2ss_zero_len_pkt(udc, ep->epnum);
- }
- return;
- }
- }
-
- if (result <= 0) {
- /*---------------------------------------------------------*/
- /* Complete */
- _nbu2ss_ep_done(ep, req, result);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_epn_out_int(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req)
-{
- int result;
-
- result = _nbu2ss_epn_out_transfer(udc, ep, req);
- if (result <= 0)
- _nbu2ss_ep_done(ep, req, result);
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_epn_in_dma_int(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req)
-{
- u32 mpkt;
- u32 size;
- struct usb_request *preq;
-
- preq = &req->req;
-
- if (!req->dma_flag)
- return;
-
- preq->actual += req->div_len;
- req->div_len = 0;
- req->dma_flag = false;
-
-#ifdef USE_DMA
- _nbu2ss_dma_unmap_single(udc, ep, req, USB_DIR_IN);
-#endif
-
- if (preq->actual != preq->length) {
- _nbu2ss_epn_in_transfer(udc, ep, req);
- } else {
- mpkt = ep->ep.maxpacket;
- size = preq->actual % mpkt;
- if (size > 0) {
- if (((preq->actual & 0x03) == 0) && (size < mpkt))
- _nbu2ss_ep_in_end(udc, ep->epnum, 0, 0);
- } else {
- _nbu2ss_epn_in_int(udc, ep, req);
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_epn_out_dma_int(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- struct nbu2ss_req *req)
-{
- int i;
- u32 num;
- u32 dmacnt, ep_dmacnt;
- u32 mpkt;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- num = ep->epnum - 1;
-
- if (req->req.actual == req->req.length) {
- if ((req->req.length % ep->ep.maxpacket) && !req->zero) {
- req->div_len = 0;
- req->dma_flag = false;
- _nbu2ss_ep_done(ep, req, 0);
- return;
- }
- }
-
- ep_dmacnt = _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT)
- & EPN_DMACNT;
- ep_dmacnt >>= 16;
-
- for (i = 0; i < EPC_PLL_LOCK_COUNT; i++) {
- dmacnt = _nbu2ss_readl(&preg->EP_DCR[num].EP_DCR1)
- & DCR1_EPN_DMACNT;
- dmacnt >>= 16;
- if (ep_dmacnt == dmacnt)
- break;
- }
-
- _nbu2ss_bitclr(&preg->EP_DCR[num].EP_DCR1, DCR1_EPN_REQEN);
-
- if (dmacnt != 0) {
- mpkt = ep->ep.maxpacket;
- if ((req->div_len % mpkt) == 0)
- req->div_len -= mpkt * dmacnt;
- }
-
- if ((req->req.actual % ep->ep.maxpacket) > 0) {
- if (req->req.actual == req->div_len) {
- req->div_len = 0;
- req->dma_flag = false;
- _nbu2ss_ep_done(ep, req, 0);
- return;
- }
- }
-
- req->req.actual += req->div_len;
- req->div_len = 0;
- req->dma_flag = false;
-
- _nbu2ss_epn_out_int(udc, ep, req);
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_epn_int(struct nbu2ss_udc *udc, u32 epnum)
-{
- u32 num;
- u32 status;
-
- struct nbu2ss_req *req;
- struct nbu2ss_ep *ep = &udc->ep[epnum];
-
- num = epnum - 1;
-
- /* Interrupt Status */
- status = _nbu2ss_readl(&udc->p_regs->EP_REGS[num].EP_STATUS);
-
- /* Interrupt Clear */
- _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_STATUS, ~status);
-
- req = list_first_entry_or_null(&ep->queue, struct nbu2ss_req, queue);
- if (!req) {
- /* pr_warn("=== %s(%d) req == NULL\n", __func__, epnum); */
- return;
- }
-
- if (status & EPN_OUT_END_INT) {
- status &= ~EPN_OUT_INT;
- _nbu2ss_epn_out_dma_int(udc, ep, req);
- }
-
- if (status & EPN_OUT_INT)
- _nbu2ss_epn_out_int(udc, ep, req);
-
- if (status & EPN_IN_END_INT) {
- status &= ~EPN_IN_INT;
- _nbu2ss_epn_in_dma_int(udc, ep, req);
- }
-
- if (status & EPN_IN_INT)
- _nbu2ss_epn_in_int(udc, ep, req);
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_ep_int(struct nbu2ss_udc *udc, u32 epnum)
-{
- if (epnum == 0)
- _nbu2ss_ep0_int(udc);
- else
- _nbu2ss_epn_int(udc, epnum);
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_ep0_enable(struct nbu2ss_udc *udc)
-{
- _nbu2ss_bitset(&udc->p_regs->EP0_CONTROL, (EP0_AUTO | EP0_BCLR));
- _nbu2ss_writel(&udc->p_regs->EP0_INT_ENA, EP0_INT_EN_BIT);
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
- struct nbu2ss_ep *ep,
- int status)
-{
- struct nbu2ss_req *req, *n;
-
- /* Endpoint Disable */
- _nbu2ss_epn_exit(udc, ep);
-
- /* DMA Disable */
- _nbu2ss_ep_dma_exit(udc, ep);
-
- if (list_empty(&ep->queue))
- return 0;
-
- /* called with irqs blocked */
- list_for_each_entry_safe(req, n, &ep->queue, queue) {
- _nbu2ss_ep_done(ep, req, status);
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_quiesce(struct nbu2ss_udc *udc)
-{
- struct nbu2ss_ep *ep;
-
- udc->gadget.speed = USB_SPEED_UNKNOWN;
-
- _nbu2ss_nuke(udc, &udc->ep[0], -ESHUTDOWN);
-
- /* Endpoint n */
- list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
- _nbu2ss_nuke(udc, ep, -ESHUTDOWN);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_pullup(struct nbu2ss_udc *udc, int is_on)
-{
- u32 reg_dt;
-
- if (udc->vbus_active == 0)
- return -ESHUTDOWN;
-
- if (is_on) {
- /* D+ Pullup */
- if (udc->driver) {
- reg_dt = (_nbu2ss_readl(&udc->p_regs->USB_CONTROL)
- | PUE2) & ~(u32)CONNECTB;
-
- _nbu2ss_writel(&udc->p_regs->USB_CONTROL, reg_dt);
- }
-
- } else {
- /* D+ Pulldown */
- reg_dt = (_nbu2ss_readl(&udc->p_regs->USB_CONTROL) | CONNECTB)
- & ~(u32)PUE2;
-
- _nbu2ss_writel(&udc->p_regs->USB_CONTROL, reg_dt);
- udc->gadget.speed = USB_SPEED_UNKNOWN;
- }
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_fifo_flush(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
-{
- struct fc_regs __iomem *p = udc->p_regs;
-
- if (udc->vbus_active == 0)
- return;
-
- if (ep->epnum == 0) {
- /* EP0 */
- _nbu2ss_bitset(&p->EP0_CONTROL, EP0_BCLR);
-
- } else {
- /* EPN */
- _nbu2ss_ep_dma_abort(udc, ep);
- _nbu2ss_bitset(&p->EP_REGS[ep->epnum - 1].EP_CONTROL, EPN_BCLR);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static int _nbu2ss_enable_controller(struct nbu2ss_udc *udc)
-{
- int waitcnt = 0;
-
- if (udc->udc_enabled)
- return 0;
-
- /* Reset */
- _nbu2ss_bitset(&udc->p_regs->EPCTR, (DIRPD | EPC_RST));
- udelay(EPC_RST_DISABLE_TIME); /* 1us wait */
-
- _nbu2ss_bitclr(&udc->p_regs->EPCTR, DIRPD);
- mdelay(EPC_DIRPD_DISABLE_TIME); /* 1ms wait */
-
- _nbu2ss_bitclr(&udc->p_regs->EPCTR, EPC_RST);
-
- _nbu2ss_writel(&udc->p_regs->AHBSCTR, WAIT_MODE);
-
- _nbu2ss_writel(&udc->p_regs->AHBMCTR,
- HBUSREQ_MODE | HTRANS_MODE | WBURST_TYPE);
-
- while (!(_nbu2ss_readl(&udc->p_regs->EPCTR) & PLL_LOCK)) {
- waitcnt++;
- udelay(1); /* 1us wait */
- if (waitcnt == EPC_PLL_LOCK_COUNT) {
- dev_err(udc->dev, "*** Reset Cancel failed\n");
- return -EINVAL;
- }
- }
-
- _nbu2ss_bitset(&udc->p_regs->UTMI_CHARACTER_1, USB_SQUSET);
-
- _nbu2ss_bitset(&udc->p_regs->USB_CONTROL, (INT_SEL | SOF_RCV));
-
- /* EP0 */
- _nbu2ss_ep0_enable(udc);
-
- /* USB Interrupt Enable */
- _nbu2ss_bitset(&udc->p_regs->USB_INT_ENA, USB_INT_EN_BIT);
-
- udc->udc_enabled = true;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_reset_controller(struct nbu2ss_udc *udc)
-{
- _nbu2ss_bitset(&udc->p_regs->EPCTR, EPC_RST);
- _nbu2ss_bitclr(&udc->p_regs->EPCTR, EPC_RST);
-}
-
-/*-------------------------------------------------------------------------*/
-static void _nbu2ss_disable_controller(struct nbu2ss_udc *udc)
-{
- if (udc->udc_enabled) {
- udc->udc_enabled = false;
- _nbu2ss_reset_controller(udc);
- _nbu2ss_bitset(&udc->p_regs->EPCTR, (DIRPD | EPC_RST));
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_check_vbus(struct nbu2ss_udc *udc)
-{
- int nret;
- u32 reg_dt;
-
- /* chattering */
- mdelay(VBUS_CHATTERING_MDELAY); /* wait (ms) */
-
- /* VBUS ON Check*/
- reg_dt = gpiod_get_value(vbus_gpio);
- if (reg_dt == 0) {
- udc->linux_suspended = 0;
-
- _nbu2ss_reset_controller(udc);
- dev_info(udc->dev, " ----- VBUS OFF\n");
-
- if (udc->vbus_active == 1) {
- /* VBUS OFF */
- udc->vbus_active = 0;
- if (udc->usb_suspended) {
- udc->usb_suspended = 0;
- /* _nbu2ss_reset_controller(udc); */
- }
- udc->devstate = USB_STATE_NOTATTACHED;
-
- _nbu2ss_quiesce(udc);
- if (udc->driver) {
- spin_unlock(&udc->lock);
- udc->driver->disconnect(&udc->gadget);
- spin_lock(&udc->lock);
- }
-
- _nbu2ss_disable_controller(udc);
- }
- } else {
- mdelay(5); /* wait (5ms) */
- reg_dt = gpiod_get_value(vbus_gpio);
- if (reg_dt == 0)
- return;
-
- dev_info(udc->dev, " ----- VBUS ON\n");
-
- if (udc->linux_suspended)
- return;
-
- if (udc->vbus_active == 0) {
- /* VBUS ON */
- udc->vbus_active = 1;
- udc->devstate = USB_STATE_POWERED;
-
- nret = _nbu2ss_enable_controller(udc);
- if (nret < 0) {
- _nbu2ss_disable_controller(udc);
- udc->vbus_active = 0;
- return;
- }
-
- _nbu2ss_pullup(udc, 1);
-
-#ifdef UDC_DEBUG_DUMP
- _nbu2ss_dump_register(udc);
-#endif /* UDC_DEBUG_DUMP */
-
- } else {
- if (udc->devstate == USB_STATE_POWERED)
- _nbu2ss_pullup(udc, 1);
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_int_bus_reset(struct nbu2ss_udc *udc)
-{
- udc->devstate = USB_STATE_DEFAULT;
- udc->remote_wakeup = 0;
-
- _nbu2ss_quiesce(udc);
-
- udc->ep0state = EP0_IDLE;
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_int_usb_resume(struct nbu2ss_udc *udc)
-{
- if (udc->usb_suspended == 1) {
- udc->usb_suspended = 0;
- if (udc->driver && udc->driver->resume) {
- spin_unlock(&udc->lock);
- udc->driver->resume(&udc->gadget);
- spin_lock(&udc->lock);
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static inline void _nbu2ss_int_usb_suspend(struct nbu2ss_udc *udc)
-{
- u32 reg_dt;
-
- if (udc->usb_suspended == 0) {
- reg_dt = gpiod_get_value(vbus_gpio);
-
- if (reg_dt == 0)
- return;
-
- udc->usb_suspended = 1;
- if (udc->driver && udc->driver->suspend) {
- spin_unlock(&udc->lock);
- udc->driver->suspend(&udc->gadget);
- spin_lock(&udc->lock);
- }
-
- _nbu2ss_bitset(&udc->p_regs->USB_CONTROL, SUSPEND);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-/* VBUS (GPIO153) Interrupt */
-static irqreturn_t _nbu2ss_vbus_irq(int irq, void *_udc)
-{
- struct nbu2ss_udc *udc = (struct nbu2ss_udc *)_udc;
-
- spin_lock(&udc->lock);
- _nbu2ss_check_vbus(udc);
- spin_unlock(&udc->lock);
-
- return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-/* Interrupt (udc) */
-static irqreturn_t _nbu2ss_udc_irq(int irq, void *_udc)
-{
- u8 suspend_flag = 0;
- u32 status;
- u32 epnum, int_bit;
-
- struct nbu2ss_udc *udc = (struct nbu2ss_udc *)_udc;
- struct fc_regs __iomem *preg = udc->p_regs;
-
- if (gpiod_get_value(vbus_gpio) == 0) {
- _nbu2ss_writel(&preg->USB_INT_STA, ~USB_INT_STA_RW);
- _nbu2ss_writel(&preg->USB_INT_ENA, 0);
- return IRQ_HANDLED;
- }
-
- spin_lock(&udc->lock);
-
- for (;;) {
- if (gpiod_get_value(vbus_gpio) == 0) {
- _nbu2ss_writel(&preg->USB_INT_STA, ~USB_INT_STA_RW);
- _nbu2ss_writel(&preg->USB_INT_ENA, 0);
- status = 0;
- } else {
- status = _nbu2ss_readl(&preg->USB_INT_STA);
- }
-
- if (status == 0)
- break;
-
- _nbu2ss_writel(&preg->USB_INT_STA, ~(status & USB_INT_STA_RW));
-
- if (status & USB_RST_INT) {
- /* USB Reset */
- _nbu2ss_int_bus_reset(udc);
- }
-
- if (status & RSUM_INT) {
- /* Resume */
- _nbu2ss_int_usb_resume(udc);
- }
-
- if (status & SPND_INT) {
- /* Suspend */
- suspend_flag = 1;
- }
-
- if (status & EPN_INT) {
- /* EP INT */
- int_bit = status >> 8;
-
- for (epnum = 0; epnum < NUM_ENDPOINTS; epnum++) {
- if (0x01 & int_bit)
- _nbu2ss_ep_int(udc, epnum);
-
- int_bit >>= 1;
-
- if (int_bit == 0)
- break;
- }
- }
- }
-
- if (suspend_flag)
- _nbu2ss_int_usb_suspend(udc);
-
- spin_unlock(&udc->lock);
-
- return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-/* usb_ep_ops */
-static int nbu2ss_ep_enable(struct usb_ep *_ep,
- const struct usb_endpoint_descriptor *desc)
-{
- u8 ep_type;
- unsigned long flags;
-
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
-
- if (!_ep || !desc) {
- pr_err(" *** %s, bad param\n", __func__);
- return -EINVAL;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
- if (!ep->udc) {
- pr_err(" *** %s, ep == NULL !!\n", __func__);
- return -EINVAL;
- }
-
- ep_type = usb_endpoint_type(desc);
- if ((ep_type == USB_ENDPOINT_XFER_CONTROL) ||
- (ep_type == USB_ENDPOINT_XFER_ISOC)) {
- pr_err(" *** %s, bat bmAttributes\n", __func__);
- return -EINVAL;
- }
-
- udc = ep->udc;
- if (udc->vbus_active == 0)
- return -ESHUTDOWN;
-
- if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
- dev_err(ep->udc->dev, " *** %s, udc !!\n", __func__);
- return -ESHUTDOWN;
- }
-
- spin_lock_irqsave(&udc->lock, flags);
-
- ep->desc = desc;
- ep->epnum = usb_endpoint_num(desc);
- ep->direct = desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
- ep->ep_type = ep_type;
- ep->wedged = 0;
- ep->halted = false;
- ep->stalled = false;
-
- ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
-
- /* DMA setting */
- _nbu2ss_ep_dma_init(udc, ep);
-
- /* Endpoint setting */
- _nbu2ss_ep_init(udc, ep);
-
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_ep_disable(struct usb_ep *_ep)
-{
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
- unsigned long flags;
-
- if (!_ep) {
- pr_err(" *** %s, bad param\n", __func__);
- return -EINVAL;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
- if (!ep->udc) {
- pr_err("udc: *** %s, ep == NULL !!\n", __func__);
- return -EINVAL;
- }
-
- udc = ep->udc;
- if (udc->vbus_active == 0)
- return -ESHUTDOWN;
-
- spin_lock_irqsave(&udc->lock, flags);
- _nbu2ss_nuke(udc, ep, -EINPROGRESS); /* dequeue request */
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static struct usb_request *nbu2ss_ep_alloc_request(struct usb_ep *ep,
- gfp_t gfp_flags)
-{
- struct nbu2ss_req *req;
-
- req = kzalloc(sizeof(*req), gfp_flags);
- if (!req)
- return NULL;
-
-#ifdef USE_DMA
- req->req.dma = DMA_ADDR_INVALID;
-#endif
- INIT_LIST_HEAD(&req->queue);
-
- return &req->req;
-}
-
-/*-------------------------------------------------------------------------*/
-static void nbu2ss_ep_free_request(struct usb_ep *_ep,
- struct usb_request *_req)
-{
- struct nbu2ss_req *req;
-
- if (_req) {
- req = container_of(_req, struct nbu2ss_req, req);
-
- kfree(req);
- }
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_ep_queue(struct usb_ep *_ep,
- struct usb_request *_req, gfp_t gfp_flags)
-{
- struct nbu2ss_req *req;
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
- unsigned long flags;
- bool bflag;
- int result = -EINVAL;
-
- /* catch various bogus parameters */
- if (!_ep || !_req) {
- if (!_ep)
- pr_err("udc: %s --- _ep == NULL\n", __func__);
-
- if (!_req)
- pr_err("udc: %s --- _req == NULL\n", __func__);
-
- return -EINVAL;
- }
-
- req = container_of(_req, struct nbu2ss_req, req);
- if (unlikely(!_req->complete ||
- !_req->buf ||
- !list_empty(&req->queue))) {
- if (!_req->complete)
- pr_err("udc: %s --- !_req->complete\n", __func__);
-
- if (!_req->buf)
- pr_err("udc:%s --- !_req->buf\n", __func__);
-
- if (!list_empty(&req->queue))
- pr_err("%s --- !list_empty(&req->queue)\n", __func__);
-
- return -EINVAL;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
- udc = ep->udc;
-
- if (udc->vbus_active == 0) {
- dev_info(udc->dev, "Can't ep_queue (VBUS OFF)\n");
- return -ESHUTDOWN;
- }
-
- if (unlikely(!udc->driver)) {
- dev_err(udc->dev, "%s, bogus device state %p\n", __func__,
- udc->driver);
- return -ESHUTDOWN;
- }
-
- spin_lock_irqsave(&udc->lock, flags);
-
-#ifdef USE_DMA
- if ((uintptr_t)req->req.buf & 0x3)
- req->unaligned = true;
- else
- req->unaligned = false;
-
- if (req->unaligned) {
- if (!ep->virt_buf) {
- ep->virt_buf = dma_alloc_coherent(udc->dev, PAGE_SIZE,
- &ep->phys_buf,
- GFP_ATOMIC | GFP_DMA);
- if (!ep->virt_buf) {
- spin_unlock_irqrestore(&udc->lock, flags);
- return -ENOMEM;
- }
- }
- if (ep->epnum > 0) {
- if (ep->direct == USB_DIR_IN)
- memcpy(ep->virt_buf, req->req.buf,
- req->req.length);
- }
- }
-
- if ((ep->epnum > 0) && (ep->direct == USB_DIR_OUT) &&
- (req->req.dma != 0))
- _nbu2ss_dma_map_single(udc, ep, req, USB_DIR_OUT);
-#endif
-
- _req->status = -EINPROGRESS;
- _req->actual = 0;
-
- bflag = list_empty(&ep->queue);
- list_add_tail(&req->queue, &ep->queue);
-
- if (bflag && !ep->stalled) {
- result = _nbu2ss_start_transfer(udc, ep, req, false);
- if (result < 0) {
- dev_err(udc->dev, " *** %s, result = %d\n", __func__,
- result);
- list_del(&req->queue);
- } else if ((ep->epnum > 0) && (ep->direct == USB_DIR_OUT)) {
-#ifdef USE_DMA
- if (req->req.length < 4 &&
- req->req.length == req->req.actual)
-#else
- if (req->req.length == req->req.actual)
-#endif
- _nbu2ss_ep_done(ep, req, result);
- }
- }
-
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
- struct nbu2ss_req *req;
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
- unsigned long flags;
-
- /* catch various bogus parameters */
- if (!_ep || !_req) {
- /* pr_err("%s, bad param(1)\n", __func__); */
- return -EINVAL;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
-
- udc = ep->udc;
- if (!udc)
- return -EINVAL;
-
- spin_lock_irqsave(&udc->lock, flags);
-
- /* make sure it's actually queued on this endpoint */
- list_for_each_entry(req, &ep->queue, queue) {
- if (&req->req == _req) {
- _nbu2ss_ep_done(ep, req, -ECONNRESET);
- spin_unlock_irqrestore(&udc->lock, flags);
- return 0;
- }
- }
-
- spin_unlock_irqrestore(&udc->lock, flags);
-
- pr_debug("%s no queue(EINVAL)\n", __func__);
-
- return -EINVAL;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_ep_set_halt(struct usb_ep *_ep, int value)
-{
- u8 ep_adrs;
- unsigned long flags;
-
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
-
- if (!_ep) {
- pr_err("%s, bad param\n", __func__);
- return -EINVAL;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
-
- udc = ep->udc;
- if (!udc) {
- dev_err(ep->udc->dev, " *** %s, bad udc\n", __func__);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&udc->lock, flags);
-
- ep_adrs = ep->epnum | ep->direct;
- if (value == 0) {
- _nbu2ss_set_endpoint_stall(udc, ep_adrs, value);
- ep->stalled = false;
- } else {
- if (list_empty(&ep->queue))
- _nbu2ss_epn_set_stall(udc, ep);
- else
- ep->stalled = true;
- }
-
- if (value == 0)
- ep->wedged = 0;
-
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-static int nbu2ss_ep_set_wedge(struct usb_ep *_ep)
-{
- return nbu2ss_ep_set_halt(_ep, 1);
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_ep_fifo_status(struct usb_ep *_ep)
-{
- u32 data;
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
- unsigned long flags;
- struct fc_regs __iomem *preg;
-
- if (!_ep) {
- pr_err("%s, bad param\n", __func__);
- return -EINVAL;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
-
- udc = ep->udc;
- if (!udc) {
- dev_err(ep->udc->dev, "%s, bad udc\n", __func__);
- return -EINVAL;
- }
-
- preg = udc->p_regs;
-
- data = gpiod_get_value(vbus_gpio);
- if (data == 0)
- return -EINVAL;
-
- spin_lock_irqsave(&udc->lock, flags);
-
- if (ep->epnum == 0) {
- data = _nbu2ss_readl(&preg->EP0_LENGTH) & EP0_LDATA;
-
- } else {
- data = _nbu2ss_readl(&preg->EP_REGS[ep->epnum - 1].EP_LEN_DCNT)
- & EPN_LDATA;
- }
-
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static void nbu2ss_ep_fifo_flush(struct usb_ep *_ep)
-{
- u32 data;
- struct nbu2ss_ep *ep;
- struct nbu2ss_udc *udc;
- unsigned long flags;
-
- if (!_ep) {
- pr_err("udc: %s, bad param\n", __func__);
- return;
- }
-
- ep = container_of(_ep, struct nbu2ss_ep, ep);
-
- udc = ep->udc;
- if (!udc) {
- dev_err(ep->udc->dev, "%s, bad udc\n", __func__);
- return;
- }
-
- data = gpiod_get_value(vbus_gpio);
- if (data == 0)
- return;
-
- spin_lock_irqsave(&udc->lock, flags);
- _nbu2ss_fifo_flush(udc, ep);
- spin_unlock_irqrestore(&udc->lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-static const struct usb_ep_ops nbu2ss_ep_ops = {
- .enable = nbu2ss_ep_enable,
- .disable = nbu2ss_ep_disable,
-
- .alloc_request = nbu2ss_ep_alloc_request,
- .free_request = nbu2ss_ep_free_request,
-
- .queue = nbu2ss_ep_queue,
- .dequeue = nbu2ss_ep_dequeue,
-
- .set_halt = nbu2ss_ep_set_halt,
- .set_wedge = nbu2ss_ep_set_wedge,
-
- .fifo_status = nbu2ss_ep_fifo_status,
- .fifo_flush = nbu2ss_ep_fifo_flush,
-};
-
-/*-------------------------------------------------------------------------*/
-/* usb_gadget_ops */
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_get_frame(struct usb_gadget *pgadget)
-{
- u32 data;
- struct nbu2ss_udc *udc;
-
- if (!pgadget) {
- pr_err("udc: %s, bad param\n", __func__);
- return -EINVAL;
- }
-
- udc = container_of(pgadget, struct nbu2ss_udc, gadget);
- data = gpiod_get_value(vbus_gpio);
- if (data == 0)
- return -EINVAL;
-
- return _nbu2ss_readl(&udc->p_regs->USB_ADDRESS) & FRAME;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_wakeup(struct usb_gadget *pgadget)
-{
- int i;
- u32 data;
-
- struct nbu2ss_udc *udc;
-
- if (!pgadget) {
- pr_err("%s, bad param\n", __func__);
- return -EINVAL;
- }
-
- udc = container_of(pgadget, struct nbu2ss_udc, gadget);
-
- data = gpiod_get_value(vbus_gpio);
- if (data == 0) {
- dev_warn(&pgadget->dev, "VBUS LEVEL = %d\n", data);
- return -EINVAL;
- }
-
- _nbu2ss_bitset(&udc->p_regs->EPCTR, PLL_RESUME);
-
- for (i = 0; i < EPC_PLL_LOCK_COUNT; i++) {
- data = _nbu2ss_readl(&udc->p_regs->EPCTR);
-
- if (data & PLL_LOCK)
- break;
- }
-
- _nbu2ss_bitclr(&udc->p_regs->EPCTR, PLL_RESUME);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_set_selfpowered(struct usb_gadget *pgadget,
- int is_selfpowered)
-{
- struct nbu2ss_udc *udc;
- unsigned long flags;
-
- if (!pgadget) {
- pr_err("%s, bad param\n", __func__);
- return -EINVAL;
- }
-
- udc = container_of(pgadget, struct nbu2ss_udc, gadget);
-
- spin_lock_irqsave(&udc->lock, flags);
- pgadget->is_selfpowered = (is_selfpowered != 0);
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_vbus_session(struct usb_gadget *pgadget, int is_active)
-{
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_vbus_draw(struct usb_gadget *pgadget, unsigned int mA)
-{
- struct nbu2ss_udc *udc;
- unsigned long flags;
-
- if (!pgadget) {
- pr_err("%s, bad param\n", __func__);
- return -EINVAL;
- }
-
- udc = container_of(pgadget, struct nbu2ss_udc, gadget);
-
- spin_lock_irqsave(&udc->lock, flags);
- udc->mA = mA;
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_pullup(struct usb_gadget *pgadget, int is_on)
-{
- struct nbu2ss_udc *udc;
- unsigned long flags;
-
- if (!pgadget) {
- pr_err("%s, bad param\n", __func__);
- return -EINVAL;
- }
-
- udc = container_of(pgadget, struct nbu2ss_udc, gadget);
-
- if (!udc->driver) {
- pr_warn("%s, Not Regist Driver\n", __func__);
- return -EINVAL;
- }
-
- if (udc->vbus_active == 0)
- return -ESHUTDOWN;
-
- spin_lock_irqsave(&udc->lock, flags);
- _nbu2ss_pullup(udc, is_on);
- spin_unlock_irqrestore(&udc->lock, flags);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_gad_ioctl(struct usb_gadget *pgadget,
- unsigned int code, unsigned long param)
-{
- return 0;
-}
-
-static const struct usb_gadget_ops nbu2ss_gadget_ops = {
- .get_frame = nbu2ss_gad_get_frame,
- .wakeup = nbu2ss_gad_wakeup,
- .set_selfpowered = nbu2ss_gad_set_selfpowered,
- .vbus_session = nbu2ss_gad_vbus_session,
- .vbus_draw = nbu2ss_gad_vbus_draw,
- .pullup = nbu2ss_gad_pullup,
- .ioctl = nbu2ss_gad_ioctl,
-};
-
-static const struct {
- const char *name;
- const struct usb_ep_caps caps;
-} ep_info[NUM_ENDPOINTS] = {
-#define EP_INFO(_name, _caps) \
- { \
- .name = _name, \
- .caps = _caps, \
- }
-
- EP_INFO("ep0",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep1-bulk",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep2-bulk",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep3in-int",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
- EP_INFO("ep4-iso",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep5-iso",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep6-bulk",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep7-bulk",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("ep8in-int",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
- EP_INFO("ep9-iso",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("epa-iso",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("epb-bulk",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("epc-bulk",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_ALL)),
- EP_INFO("epdin-int",
- USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
-
-#undef EP_INFO
-};
-
-/*-------------------------------------------------------------------------*/
-static void nbu2ss_drv_ep_init(struct nbu2ss_udc *udc)
-{
- int i;
-
- INIT_LIST_HEAD(&udc->gadget.ep_list);
- udc->gadget.ep0 = &udc->ep[0].ep;
-
- for (i = 0; i < NUM_ENDPOINTS; i++) {
- struct nbu2ss_ep *ep = &udc->ep[i];
-
- ep->udc = udc;
- ep->desc = NULL;
-
- ep->ep.driver_data = NULL;
- ep->ep.name = ep_info[i].name;
- ep->ep.caps = ep_info[i].caps;
- ep->ep.ops = &nbu2ss_ep_ops;
-
- usb_ep_set_maxpacket_limit(&ep->ep,
- i == 0 ? EP0_PACKETSIZE
- : EP_PACKETSIZE);
-
- list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
- INIT_LIST_HEAD(&ep->queue);
- }
-
- list_del_init(&udc->ep[0].ep.ep_list);
-}
-
-/*-------------------------------------------------------------------------*/
-/* platform_driver */
-static int nbu2ss_drv_contest_init(struct platform_device *pdev,
- struct nbu2ss_udc *udc)
-{
- spin_lock_init(&udc->lock);
- udc->dev = &pdev->dev;
-
- udc->gadget.is_selfpowered = 1;
- udc->devstate = USB_STATE_NOTATTACHED;
- udc->pdev = pdev;
- udc->mA = 0;
-
- udc->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
- /* init Endpoint */
- nbu2ss_drv_ep_init(udc);
-
- /* init Gadget */
- udc->gadget.ops = &nbu2ss_gadget_ops;
- udc->gadget.ep0 = &udc->ep[0].ep;
- udc->gadget.speed = USB_SPEED_UNKNOWN;
- udc->gadget.name = driver_name;
- /* udc->gadget.is_dualspeed = 1; */
-
- device_initialize(&udc->gadget.dev);
-
- dev_set_name(&udc->gadget.dev, "gadget");
- udc->gadget.dev.parent = &pdev->dev;
- udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-
- return 0;
-}
-
-/*
- * probe - binds to the platform device
- */
-static int nbu2ss_drv_probe(struct platform_device *pdev)
-{
- int status;
- struct nbu2ss_udc *udc;
- int irq;
- void __iomem *mmio_base;
-
- udc = &udc_controller;
- memset(udc, 0, sizeof(struct nbu2ss_udc));
-
- platform_set_drvdata(pdev, udc);
-
- /* require I/O memory and IRQ to be provided as resources */
- mmio_base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(mmio_base))
- return PTR_ERR(mmio_base);
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
- status = devm_request_irq(&pdev->dev, irq, _nbu2ss_udc_irq,
- 0, driver_name, udc);
-
- /* IO Memory */
- udc->p_regs = (struct fc_regs __iomem *)mmio_base;
-
- /* USB Function Controller Interrupt */
- if (status != 0) {
- dev_err(udc->dev, "request_irq(USB_UDC_IRQ_1) failed\n");
- return status;
- }
-
- /* Driver Initialization */
- status = nbu2ss_drv_contest_init(pdev, udc);
- if (status < 0) {
- /* Error */
- return status;
- }
-
- /* VBUS Interrupt */
- vbus_irq = gpiod_to_irq(vbus_gpio);
- irq_set_irq_type(vbus_irq, IRQ_TYPE_EDGE_BOTH);
- status = request_irq(vbus_irq,
- _nbu2ss_vbus_irq, IRQF_SHARED, driver_name, udc);
-
- if (status != 0) {
- dev_err(udc->dev, "request_irq(vbus_irq) failed\n");
- return status;
- }
-
- return status;
-}
-
-/*-------------------------------------------------------------------------*/
-static void nbu2ss_drv_shutdown(struct platform_device *pdev)
-{
- struct nbu2ss_udc *udc;
-
- udc = platform_get_drvdata(pdev);
- if (!udc)
- return;
-
- _nbu2ss_disable_controller(udc);
-}
-
-/*-------------------------------------------------------------------------*/
-static void nbu2ss_drv_remove(struct platform_device *pdev)
-{
- struct nbu2ss_udc *udc;
- struct nbu2ss_ep *ep;
- int i;
-
- udc = &udc_controller;
-
- for (i = 0; i < NUM_ENDPOINTS; i++) {
- ep = &udc->ep[i];
- if (ep->virt_buf)
- dma_free_coherent(udc->dev, PAGE_SIZE, (void *)ep->virt_buf,
- ep->phys_buf);
- }
-
- /* Interrupt Handler - Release */
- free_irq(vbus_irq, udc);
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_drv_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct nbu2ss_udc *udc;
-
- udc = platform_get_drvdata(pdev);
- if (!udc)
- return 0;
-
- if (udc->vbus_active) {
- udc->vbus_active = 0;
- udc->devstate = USB_STATE_NOTATTACHED;
- udc->linux_suspended = 1;
-
- if (udc->usb_suspended) {
- udc->usb_suspended = 0;
- _nbu2ss_reset_controller(udc);
- }
-
- _nbu2ss_quiesce(udc);
- }
- _nbu2ss_disable_controller(udc);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-static int nbu2ss_drv_resume(struct platform_device *pdev)
-{
- u32 data;
- struct nbu2ss_udc *udc;
-
- udc = platform_get_drvdata(pdev);
- if (!udc)
- return 0;
-
- data = gpiod_get_value(vbus_gpio);
- if (data) {
- udc->vbus_active = 1;
- udc->devstate = USB_STATE_POWERED;
- _nbu2ss_enable_controller(udc);
- _nbu2ss_pullup(udc, 1);
- }
-
- udc->linux_suspended = 0;
-
- return 0;
-}
-
-static struct platform_driver udc_driver = {
- .probe = nbu2ss_drv_probe,
- .shutdown = nbu2ss_drv_shutdown,
- .remove_new = nbu2ss_drv_remove,
- .suspend = nbu2ss_drv_suspend,
- .resume = nbu2ss_drv_resume,
- .driver = {
- .name = driver_name,
- },
-};
-
-module_platform_driver(udc_driver);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Renesas Electronics Corporation");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/emxx_udc/emxx_udc.h b/drivers/staging/emxx_udc/emxx_udc.h
deleted file mode 100644
index c9e37a1b8139c1af..0000000000000000
--- a/drivers/staging/emxx_udc/emxx_udc.h
+++ /dev/null
@@ -1,554 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * EMXX FCD (Function Controller Driver) for USB.
- *
- * Copyright (C) 2010 Renesas Electronics Corporation
- */
-
-#ifndef _LINUX_EMXX_H
-#define _LINUX_EMXX_H
-
-/*---------------------------------------------------------------------------*/
-
-/*----------------- Default define */
-#define USE_DMA 1
-#define USE_SUSPEND_WAIT 1
-
-/*------------ Board dependence(Resource) */
-#define VBUS_VALUE GPIO_VBUS
-
-/* below hacked up for staging integration */
-#define GPIO_VBUS 0 /* GPIO_P153 on KZM9D */
-#define INT_VBUS 0 /* IRQ for GPIO_P153 */
-
-/*------------ Board dependence(Wait) */
-
-/* CHATTERING wait time ms */
-#define VBUS_CHATTERING_MDELAY 1
-/* DMA Abort wait time ms */
-#define DMA_DISABLE_TIME 10
-
-/*------------ Controller dependence */
-#define NUM_ENDPOINTS 14 /* Endpoint */
-#define REG_EP_NUM 15 /* Endpoint Register */
-#define DMA_MAX_COUNT 256 /* DMA Block */
-
-#define EPC_RST_DISABLE_TIME 1 /* 1 usec */
-#define EPC_DIRPD_DISABLE_TIME 1 /* 1 msec */
-#define EPC_PLL_LOCK_COUNT 1000 /* 1000 */
-#define IN_DATA_EMPTY_COUNT 1000 /* 1000 */
-
-#define CHATGER_TIME 700 /* 700msec */
-#define USB_SUSPEND_TIME 2000 /* 2 sec */
-
-/* U2F FLAG */
-#define U2F_ENABLE 1
-#define U2F_DISABLE 0
-
-#define TEST_FORCE_ENABLE (BIT(18) | BIT(16))
-
-#define INT_SEL BIT(10)
-#define CONSTFS BIT(9)
-#define SOF_RCV BIT(8)
-#define RSUM_IN BIT(7)
-#define SUSPEND BIT(6)
-#define CONF BIT(5)
-#define DEFAULT BIT(4)
-#define CONNECTB BIT(3)
-#define PUE2 BIT(2)
-
-#define MAX_TEST_MODE_NUM 0x05
-#define TEST_MODE_SHIFT 16
-
-/*------- (0x0004) USB Status Register */
-#define SPEED_MODE BIT(6)
-#define HIGH_SPEED BIT(6)
-
-#define CONF BIT(5)
-#define DEFAULT BIT(4)
-#define USB_RST BIT(3)
-#define SPND_OUT BIT(2)
-#define RSUM_OUT BIT(1)
-
-/*------- (0x0008) USB Address Register */
-#define USB_ADDR 0x007F0000
-#define SOF_STATUS BIT(15)
-#define UFRAME (BIT(14) | BIT(13) | BIT(12))
-#define FRAME 0x000007FF
-
-#define USB_ADRS_SHIFT 16
-
-/*------- (0x000C) UTMI Characteristic 1 Register */
-#define SQUSET (BIT(7) | BIT(6) | BIT(5) | BIT(4))
-
-#define USB_SQUSET (BIT(6) | BIT(5) | BIT(4))
-
-/*------- (0x0010) TEST Control Register */
-#define FORCEHS BIT(2)
-#define CS_TESTMODEEN BIT(1)
-#define LOOPBACK BIT(0)
-
-/*------- (0x0018) Setup Data 0 Register */
-/*------- (0x001C) Setup Data 1 Register */
-
-/*------- (0x0020) USB Interrupt Status Register */
-#define EPN_INT 0x00FFFF00
-#define EP15_INT BIT(23)
-#define EP14_INT BIT(22)
-#define EP13_INT BIT(21)
-#define EP12_INT BIT(20)
-#define EP11_INT BIT(19)
-#define EP10_INT BIT(18)
-#define EP9_INT BIT(17)
-#define EP8_INT BIT(16)
-#define EP7_INT BIT(15)
-#define EP6_INT BIT(14)
-#define EP5_INT BIT(13)
-#define EP4_INT BIT(12)
-#define EP3_INT BIT(11)
-#define EP2_INT BIT(10)
-#define EP1_INT BIT(9)
-#define EP0_INT BIT(8)
-#define SPEED_MODE_INT BIT(6)
-#define SOF_ERROR_INT BIT(5)
-#define SOF_INT BIT(4)
-#define USB_RST_INT BIT(3)
-#define SPND_INT BIT(2)
-#define RSUM_INT BIT(1)
-
-#define USB_INT_STA_RW 0x7E
-
-/*------- (0x0024) USB Interrupt Enable Register */
-#define EP15_0_EN 0x00FFFF00
-#define EP15_EN BIT(23)
-#define EP14_EN BIT(22)
-#define EP13_EN BIT(21)
-#define EP12_EN BIT(20)
-#define EP11_EN BIT(19)
-#define EP10_EN BIT(18)
-#define EP9_EN BIT(17)
-#define EP8_EN BIT(16)
-#define EP7_EN BIT(15)
-#define EP6_EN BIT(14)
-#define EP5_EN BIT(13)
-#define EP4_EN BIT(12)
-#define EP3_EN BIT(11)
-#define EP2_EN BIT(10)
-#define EP1_EN BIT(9)
-#define EP0_EN BIT(8)
-#define SPEED_MODE_EN BIT(6)
-#define SOF_ERROR_EN BIT(5)
-#define SOF_EN BIT(4)
-#define USB_RST_EN BIT(3)
-#define SPND_EN BIT(2)
-#define RSUM_EN BIT(1)
-
-#define USB_INT_EN_BIT \
- (EP0_EN | SPEED_MODE_EN | USB_RST_EN | SPND_EN | RSUM_EN)
-
-/*------- (0x0028) EP0 Control Register */
-#define EP0_STGSEL BIT(18)
-#define EP0_OVERSEL BIT(17)
-#define EP0_AUTO BIT(16)
-#define EP0_PIDCLR BIT(9)
-#define EP0_BCLR BIT(8)
-#define EP0_DEND BIT(7)
-#define EP0_DW (BIT(6) | BIT(5))
-#define EP0_DW4 0
-#define EP0_DW3 (BIT(6) | BIT(5))
-#define EP0_DW2 BIT(6)
-#define EP0_DW1 BIT(5)
-
-#define EP0_INAK_EN BIT(4)
-#define EP0_PERR_NAK_CLR BIT(3)
-#define EP0_STL BIT(2)
-#define EP0_INAK BIT(1)
-#define EP0_ONAK BIT(0)
-
-/*------- (0x002C) EP0 Status Register */
-#define EP0_PID BIT(18)
-#define EP0_PERR_NAK BIT(17)
-#define EP0_PERR_NAK_INT BIT(16)
-#define EP0_OUT_NAK_INT BIT(15)
-#define EP0_OUT_NULL BIT(14)
-#define EP0_OUT_FULL BIT(13)
-#define EP0_OUT_EMPTY BIT(12)
-#define EP0_IN_NAK_INT BIT(11)
-#define EP0_IN_DATA BIT(10)
-#define EP0_IN_FULL BIT(9)
-#define EP0_IN_EMPTY BIT(8)
-#define EP0_OUT_NULL_INT BIT(7)
-#define EP0_OUT_OR_INT BIT(6)
-#define EP0_OUT_INT BIT(5)
-#define EP0_IN_INT BIT(4)
-#define EP0_STALL_INT BIT(3)
-#define STG_END_INT BIT(2)
-#define STG_START_INT BIT(1)
-#define SETUP_INT BIT(0)
-
-#define EP0_STATUS_RW_BIT (BIT(16) | BIT(15) | BIT(11) | 0xFF)
-
-/*------- (0x0030) EP0 Interrupt Enable Register */
-#define EP0_PERR_NAK_EN BIT(16)
-#define EP0_OUT_NAK_EN BIT(15)
-
-#define EP0_IN_NAK_EN BIT(11)
-
-#define EP0_OUT_NULL_EN BIT(7)
-#define EP0_OUT_OR_EN BIT(6)
-#define EP0_OUT_EN BIT(5)
-#define EP0_IN_EN BIT(4)
-#define EP0_STALL_EN BIT(3)
-#define STG_END_EN BIT(2)
-#define STG_START_EN BIT(1)
-#define SETUP_EN BIT(0)
-
-#define EP0_INT_EN_BIT \
- (EP0_OUT_OR_EN | EP0_OUT_EN | EP0_IN_EN | STG_END_EN | SETUP_EN)
-
-/*------- (0x0034) EP0 Length Register */
-#define EP0_LDATA 0x0000007F
-
-/*------- (0x0038) EP0 Read Register */
-/*------- (0x003C) EP0 Write Register */
-
-/*------- (0x0040:) EPN Control Register */
-#define EPN_EN BIT(31)
-#define EPN_BUF_TYPE BIT(30)
-#define EPN_BUF_SINGLE BIT(30)
-
-#define EPN_DIR0 BIT(26)
-#define EPN_MODE (BIT(25) | BIT(24))
-#define EPN_BULK 0
-#define EPN_INTERRUPT BIT(24)
-#define EPN_ISO BIT(25)
-
-#define EPN_OVERSEL BIT(17)
-#define EPN_AUTO BIT(16)
-
-#define EPN_IPIDCLR BIT(11)
-#define EPN_OPIDCLR BIT(10)
-#define EPN_BCLR BIT(9)
-#define EPN_CBCLR BIT(8)
-#define EPN_DEND BIT(7)
-#define EPN_DW (BIT(6) | BIT(5))
-#define EPN_DW4 0
-#define EPN_DW3 (BIT(6) | BIT(5))
-#define EPN_DW2 BIT(6)
-#define EPN_DW1 BIT(5)
-
-#define EPN_OSTL_EN BIT(4)
-#define EPN_ISTL BIT(3)
-#define EPN_OSTL BIT(2)
-
-#define EPN_ONAK BIT(0)
-
-/*------- (0x0044:) EPN Status Register */
-#define EPN_ISO_PIDERR BIT(29) /* R */
-#define EPN_OPID BIT(28) /* R */
-#define EPN_OUT_NOTKN BIT(27) /* R */
-#define EPN_ISO_OR BIT(26) /* R */
-
-#define EPN_ISO_CRC BIT(24) /* R */
-#define EPN_OUT_END_INT BIT(23) /* RW */
-#define EPN_OUT_OR_INT BIT(22) /* RW */
-#define EPN_OUT_NAK_ERR_INT BIT(21) /* RW */
-#define EPN_OUT_STALL_INT BIT(20) /* RW */
-#define EPN_OUT_INT BIT(19) /* RW */
-#define EPN_OUT_NULL_INT BIT(18) /* RW */
-#define EPN_OUT_FULL BIT(17) /* R */
-#define EPN_OUT_EMPTY BIT(16) /* R */
-
-#define EPN_IPID BIT(10) /* R */
-#define EPN_IN_NOTKN BIT(9) /* R */
-#define EPN_ISO_UR BIT(8) /* R */
-#define EPN_IN_END_INT BIT(7) /* RW */
-
-#define EPN_IN_NAK_ERR_INT BIT(5) /* RW */
-#define EPN_IN_STALL_INT BIT(4) /* RW */
-#define EPN_IN_INT BIT(3) /* RW */
-#define EPN_IN_DATA BIT(2) /* R */
-#define EPN_IN_FULL BIT(1) /* R */
-#define EPN_IN_EMPTY BIT(0) /* R */
-
-#define EPN_INT_EN \
- (EPN_OUT_END_INT | EPN_OUT_INT | EPN_IN_END_INT | EPN_IN_INT)
-
-/*------- (0x0048:) EPN Interrupt Enable Register */
-#define EPN_OUT_END_EN BIT(23) /* RW */
-#define EPN_OUT_OR_EN BIT(22) /* RW */
-#define EPN_OUT_NAK_ERR_EN BIT(21) /* RW */
-#define EPN_OUT_STALL_EN BIT(20) /* RW */
-#define EPN_OUT_EN BIT(19) /* RW */
-#define EPN_OUT_NULL_EN BIT(18) /* RW */
-
-#define EPN_IN_END_EN BIT(7) /* RW */
-
-#define EPN_IN_NAK_ERR_EN BIT(5) /* RW */
-#define EPN_IN_STALL_EN BIT(4) /* RW */
-#define EPN_IN_EN BIT(3) /* RW */
-
-/*------- (0x004C:) EPN Interrupt Enable Register */
-#define EPN_STOP_MODE BIT(11)
-#define EPN_DEND_SET BIT(10)
-#define EPN_BURST_SET BIT(9)
-#define EPN_STOP_SET BIT(8)
-
-#define EPN_DMA_EN BIT(4)
-
-#define EPN_DMAMODE0 BIT(0)
-
-/*------- (0x0050:) EPN MaxPacket & BaseAddress Register */
-#define EPN_BASEAD 0x1FFF0000
-#define EPN_MPKT 0x000007FF
-
-/*------- (0x0054:) EPN Length & DMA Count Register */
-#define EPN_DMACNT 0x01FF0000
-#define EPN_LDATA 0x000007FF
-
-/*------- (0x0058:) EPN Read Register */
-/*------- (0x005C:) EPN Write Register */
-
-/*------- (0x1000) AHBSCTR Register */
-#define WAIT_MODE BIT(0)
-
-/*------- (0x1004) AHBMCTR Register */
-#define ARBITER_CTR BIT(31) /* RW */
-#define MCYCLE_RST BIT(12) /* RW */
-
-#define ENDIAN_CTR (BIT(9) | BIT(8)) /* RW */
-#define ENDIAN_BYTE_SWAP BIT(9)
-#define ENDIAN_HALF_WORD_SWAP ENDIAN_CTR
-
-#define HBUSREQ_MODE BIT(5) /* RW */
-#define HTRANS_MODE BIT(4) /* RW */
-
-#define WBURST_TYPE BIT(2) /* RW */
-#define BURST_TYPE (BIT(1) | BIT(0)) /* RW */
-#define BURST_MAX_16 0
-#define BURST_MAX_8 BIT(0)
-#define BURST_MAX_4 BIT(1)
-#define BURST_SINGLE BURST_TYPE
-
-/*------- (0x1008) AHBBINT Register */
-#define DMA_ENDINT 0xFFFE0000 /* RW */
-
-#define AHB_VBUS_INT BIT(13) /* RW */
-
-#define MBUS_ERRINT BIT(6) /* RW */
-
-#define SBUS_ERRINT0 BIT(4) /* RW */
-#define ERR_MASTER 0x0000000F /* R */
-
-/*------- (0x100C) AHBBINTEN Register */
-#define DMA_ENDINTEN 0xFFFE0000 /* RW */
-
-#define VBUS_INTEN BIT(13) /* RW */
-
-#define MBUS_ERRINTEN BIT(6) /* RW */
-
-#define SBUS_ERRINT0EN BIT(4) /* RW */
-
-/*------- (0x1010) EPCTR Register */
-#define DIRPD BIT(12) /* RW */
-
-#define VBUS_LEVEL BIT(8) /* R */
-
-#define PLL_RESUME BIT(5) /* RW */
-#define PLL_LOCK BIT(4) /* R */
-
-#define EPC_RST BIT(0) /* RW */
-
-/*------- (0x1014) USBF_EPTEST Register */
-#define LINESTATE (BIT(9) | BIT(8)) /* R */
-#define DM_LEVEL BIT(9) /* R */
-#define DP_LEVEL BIT(8) /* R */
-
-#define PHY_TST BIT(1) /* RW */
-#define PHY_TSTCLK BIT(0) /* RW */
-
-/*------- (0x1020) USBSSVER Register */
-#define AHBB_VER 0x00FF0000 /* R */
-#define EPC_VER 0x0000FF00 /* R */
-#define SS_VER 0x000000FF /* R */
-
-/*------- (0x1024) USBSSCONF Register */
-#define EP_AVAILABLE 0xFFFF0000 /* R */
-#define DMA_AVAILABLE 0x0000FFFF /* R */
-
-/*------- (0x1110:) EPNDCR1 Register */
-#define DCR1_EPN_DMACNT 0x00FF0000 /* RW */
-
-#define DCR1_EPN_DIR0 BIT(1) /* RW */
-#define DCR1_EPN_REQEN BIT(0) /* RW */
-
-/*------- (0x1114:) EPNDCR2 Register */
-#define DCR2_EPN_LMPKT 0x07FF0000 /* RW */
-
-#define DCR2_EPN_MPKT 0x000007FF /* RW */
-
-/*------- (0x1118:) EPNTADR Register */
-#define EPN_TADR 0xFFFFFFFF /* RW */
-
-/*===========================================================================*/
-/* Struct */
-/*------- ep_regs */
-struct ep_regs {
- u32 EP_CONTROL; /* EP Control */
- u32 EP_STATUS; /* EP Status */
- u32 EP_INT_ENA; /* EP Interrupt Enable */
- u32 EP_DMA_CTRL; /* EP DMA Control */
- u32 EP_PCKT_ADRS; /* EP Maxpacket & BaseAddress */
- u32 EP_LEN_DCNT; /* EP Length & DMA count */
- u32 EP_READ; /* EP Read */
- u32 EP_WRITE; /* EP Write */
-};
-
-/*------- ep_dcr */
-struct ep_dcr {
- u32 EP_DCR1; /* EP_DCR1 */
- u32 EP_DCR2; /* EP_DCR2 */
- u32 EP_TADR; /* EP_TADR */
- u32 Reserved; /* Reserved */
-};
-
-/*------- Function Registers */
-struct fc_regs {
- u32 USB_CONTROL; /* (0x0000) USB Control */
- u32 USB_STATUS; /* (0x0004) USB Status */
- u32 USB_ADDRESS; /* (0x0008) USB Address */
- u32 UTMI_CHARACTER_1; /* (0x000C) UTMI Setting */
- u32 TEST_CONTROL; /* (0x0010) TEST Control */
- u32 reserved_14; /* (0x0014) Reserved */
- u32 SETUP_DATA0; /* (0x0018) Setup Data0 */
- u32 SETUP_DATA1; /* (0x001C) Setup Data1 */
- u32 USB_INT_STA; /* (0x0020) USB Interrupt Status */
- u32 USB_INT_ENA; /* (0x0024) USB Interrupt Enable */
- u32 EP0_CONTROL; /* (0x0028) EP0 Control */
- u32 EP0_STATUS; /* (0x002C) EP0 Status */
- u32 EP0_INT_ENA; /* (0x0030) EP0 Interrupt Enable */
- u32 EP0_LENGTH; /* (0x0034) EP0 Length */
- u32 EP0_READ; /* (0x0038) EP0 Read */
- u32 EP0_WRITE; /* (0x003C) EP0 Write */
-
- struct ep_regs EP_REGS[REG_EP_NUM]; /* Endpoint Register */
-
- u8 reserved_220[0x1000 - 0x220]; /* (0x0220:0x0FFF) Reserved */
-
- u32 AHBSCTR; /* (0x1000) AHBSCTR */
- u32 AHBMCTR; /* (0x1004) AHBMCTR */
- u32 AHBBINT; /* (0x1008) AHBBINT */
- u32 AHBBINTEN; /* (0x100C) AHBBINTEN */
- u32 EPCTR; /* (0x1010) EPCTR */
- u32 USBF_EPTEST; /* (0x1014) USBF_EPTEST */
-
- u8 reserved_1018[0x20 - 0x18]; /* (0x1018:0x101F) Reserved */
-
- u32 USBSSVER; /* (0x1020) USBSSVER */
- u32 USBSSCONF; /* (0x1024) USBSSCONF */
-
- u8 reserved_1028[0x110 - 0x28]; /* (0x1028:0x110F) Reserved */
-
- struct ep_dcr EP_DCR[REG_EP_NUM]; /* */
-
- u8 reserved_1200[0x1000 - 0x200]; /* Reserved */
-} __aligned(32);
-
-#define EP0_PACKETSIZE 64
-#define EP_PACKETSIZE 1024
-
-/* EPN RAM SIZE */
-#define D_RAM_SIZE_CTRL 64
-
-/* EPN Bulk Endpoint Max Packet Size */
-#define D_FS_RAM_SIZE_BULK 64
-#define D_HS_RAM_SIZE_BULK 512
-
-struct nbu2ss_udc;
-
-enum ep0_state {
- EP0_IDLE,
- EP0_IN_DATA_PHASE,
- EP0_OUT_DATA_PHASE,
- EP0_IN_STATUS_PHASE,
- EP0_OUT_STATUS_PAHSE,
- EP0_END_XFER,
- EP0_SUSPEND,
- EP0_STALL,
-};
-
-struct nbu2ss_req {
- struct usb_request req;
- struct list_head queue;
-
- u32 div_len;
- bool dma_flag;
- bool zero;
-
- bool unaligned;
-
- unsigned mapped:1;
-};
-
-struct nbu2ss_ep {
- struct usb_ep ep;
- struct list_head queue;
-
- struct nbu2ss_udc *udc;
-
- const struct usb_endpoint_descriptor *desc;
-
- u8 epnum;
- u8 direct;
- u8 ep_type;
-
- unsigned wedged:1;
- unsigned halted:1;
- unsigned stalled:1;
-
- u8 *virt_buf;
- dma_addr_t phys_buf;
-};
-
-struct nbu2ss_udc {
- struct usb_gadget gadget;
- struct usb_gadget_driver *driver;
- struct platform_device *pdev;
- struct device *dev;
- spinlock_t lock; /* Protects nbu2ss_udc structure fields */
- struct completion *pdone;
-
- enum ep0_state ep0state;
- enum usb_device_state devstate;
- struct usb_ctrlrequest ctrl;
- struct nbu2ss_req ep0_req;
- u8 ep0_buf[EP0_PACKETSIZE];
-
- struct nbu2ss_ep ep[NUM_ENDPOINTS];
-
- unsigned softconnect:1;
- unsigned vbus_active:1;
- unsigned linux_suspended:1;
- unsigned linux_resume:1;
- unsigned usb_suspended:1;
- unsigned remote_wakeup:1;
- unsigned udc_enabled:1;
-
- unsigned int mA;
-
- u32 curr_config; /* Current Configuration Number */
-
- struct fc_regs __iomem *p_regs;
-};
-
-/* USB register access structure */
-union usb_reg_access {
- struct {
- unsigned char DATA[4];
- } byte;
- unsigned int dw;
-};
-
-/*-------------------------------------------------------------------------*/
-
-#endif /* _LINUX_EMXX_H */
--
2.34.1

Next message: Andrew Lunn: "Re: [PATCH net-next 02/20] dt-bindings: net: qcom,ppe: Add bindings yaml file"
Previous message: Geert Uytterhoeven: "[PATCH v2 2/4] staging: board: Remove KZM9D board staging code"
In reply to: Geert Uytterhoeven: "[PATCH v2 2/4] staging: board: Remove KZM9D board staging code"
Next in thread: Geert Uytterhoeven: "[PATCH v2 3/4] staging: board: Remove Armadillo-800-EVA board staging code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]