[PATCH net] net: lan966x: Fix port configuration when using SGMII interface

[Horatiu Vultur]

In case the interface between the MAC and the PHY is SGMII, then the bit
GIGA_MODE on the MAC side needs to be set regardless of the speed at
which it is running.

Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
 drivers/net/ethernet/microchip/lan966x/lan966x_port.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_port.c b/drivers/net/ethernet/microchip/lan966x/lan966x_port.c
index 92108d354051c..975a6d64a2e18 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_port.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_port.c
@@ -170,7 +170,8 @@ static void lan966x_port_link_up(struct lan966x_port *port)
 	/* Also the GIGA_MODE_ENA(1) needs to be set regardless of the
 	 * port speed for QSGMII ports.
 	 */
-	if (phy_interface_num_ports(config->portmode) == 4)
+	if (phy_interface_num_ports(config->portmode) == 4 ||
+	    config->portmode == PHY_INTERFACE_MODE_SGMII)
 		mode = DEV_MAC_MODE_CFG_GIGA_MODE_ENA_SET(1);
 
 	lan_wr(config->duplex | mode,
-- 
2.34.1