Re: [PATCH v8 3/5] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco

[Alexandre TORGUE]

Hi Dario

On 1/12/24 15:48, Dario Binacchi wrote:
> In the schematics of document UM2033, the power supply for the micro SD
> card is the same 3v3 voltage that is used to power other devices on the
> board. By generalizing the name of the voltage regulator, it can be
> referenced by other nodes in the device tree without creating
> misunderstandings.
>
> This patch is preparatory for future developments.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx>
>
> ---
>
> Changes in v8:
> - Add Reviewed-by tag of Raphael Gallais-Pou
>
>   arch/arm/boot/dts/st/stm32f769-disco.dts | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
> index 5d12ae25b327..8632bd866272 100644
> --- a/arch/arm/boot/dts/st/stm32f769-disco.dts
> +++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
> @@ -92,9 +92,9 @@ usbotg_hs_phy: usb-phy {
>   		clock-names = "main_clk";
>   	};
>   
> -	mmc_vcard: mmc_vcard {
> +	vcc_3v3: vcc_3v3 {

Replace node name by vcc-3v3. If no v9 sent, I'll do it directly.

>   		compatible = "regulator-fixed";
> -		regulator-name = "mmc_vcard";
> +		regulator-name = "vcc_3v3";
>   		regulator-min-microvolt = <3300000>;
>   		regulator-max-microvolt = <3300000>;
>   	};
> @@ -128,7 +128,7 @@ &rtc {
>   
>   &sdio2 {
>   	status = "okay";
> -	vmmc-supply = <&mmc_vcard>;
> +	vmmc-supply = <&vcc_3v3>;
>   	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
>   	broken-cd;
>   	pinctrl-names = "default", "opendrain", "sleep";