Re: [PATCH net-next v4 07/15] net: ravb: Move reference clock enable/disable on runtime PM APIs

[Sergey Shtylyov]

On 1/23/24 3:58 PM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Reference clock could be or not part of the power domain. If it is part of

   Could be or not be, perhaps?

> the power domain, the power domain takes care of propertly setting it. In

   Properly. :-)

> case it is not part of the power domain and full runtime PM support is
> available in driver the clock will not be propertly disabled/enabled at
> runtime. For this, keep the prepare/unprepare operations in the driver's
> probe()/remove() functions and move the enable/disable in runtime PM
> functions.
> 
> Along with it, the other clock request operations were moved close to
> reference clock request and prepare to have all the clock requests
> specific code grouped together.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
[...]

> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index 9fc0e39e33c2..4673cc2faec0 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
[...]
> @@ -3060,21 +3058,27 @@ static int ravb_resume(struct device *dev)
>  	return ret;
>  }
>  
> -static int ravb_runtime_nop(struct device *dev)
> +static int ravb_runtime_suspend(struct device *dev)
>  {
> -	/* Runtime PM callback shared between ->runtime_suspend()
> -	 * and ->runtime_resume(). Simply returns success.
> -	 *
> -	 * This driver re-initializes all registers after
> -	 * pm_runtime_get_sync() anyway so there is no need
> -	 * to save and restore registers here.
> -	 */

   I want to pull out the dummy {ravb|sh_eth}_runtime_nop() funcs --
they don't seem to be necessary... Then we can implement your clock
dance with freshly added ravb_runtime_{suspend|resume}()...

[...]

MBR, Sergey