[PATCH net] net: phy: mediatek-ge-soc: sync driver with MediaTek SDK
From: Daniel Golle
Date: Wed Jan 24 2024 - 00:18:57 EST
Sync initialization and calibration routines with MediaTek's reference
driver. Improves compliance and resolves link stability issues with
CH340 IoT devices connected to MT798x built-in PHYs.
Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs")
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
drivers/net/phy/mediatek-ge-soc.c | 147 ++++++++++++++++--------------
1 file changed, 81 insertions(+), 66 deletions(-)
diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek-ge-soc.c
index 8a20d9889f105..0f3a1538a8b8e 100644
--- a/drivers/net/phy/mediatek-ge-soc.c
+++ b/drivers/net/phy/mediatek-ge-soc.c
@@ -489,7 +489,7 @@ static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
u16 reg, val;
if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
- bias = -2;
+ bias = -1;
val = clamp_val(bias + tx_r50_cal_val, 0, 63);
@@ -705,6 +705,11 @@ static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
static void mt798x_phy_common_finetune(struct phy_device *phydev)
{
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
+ __phy_write(phydev, 0x11, 0xc71);
+ __phy_write(phydev, 0x12, 0xc);
+ __phy_write(phydev, 0x10, 0x8fae);
+
/* EnabRandUpdTrig = 1 */
__phy_write(phydev, 0x11, 0x2f00);
__phy_write(phydev, 0x12, 0xe);
@@ -715,15 +720,56 @@ static void mt798x_phy_common_finetune(struct phy_device *phydev)
__phy_write(phydev, 0x12, 0x0);
__phy_write(phydev, 0x10, 0x83aa);
- /* TrFreeze = 0 */
+ /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
+ __phy_write(phydev, 0x11, 0x240);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x9680);
+
+ /* TrFreeze = 0 (mt7988 default) */
__phy_write(phydev, 0x11, 0x0);
__phy_write(phydev, 0x12, 0x0);
__phy_write(phydev, 0x10, 0x9686);
+ /* SSTrKp100 = 5 */
+ /* SSTrKf100 = 6 */
+ /* SSTrKp1000Mas = 5 */
+ /* SSTrKf1000Mas = 6 */
/* SSTrKp1000Slv = 5 */
+ /* SSTrKf1000Slv = 6 */
__phy_write(phydev, 0x11, 0xbaef);
__phy_write(phydev, 0x12, 0x2e);
__phy_write(phydev, 0x10, 0x968c);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+}
+
+static void mt7981_phy_finetune(struct phy_device *phydev)
+{
+ u16 val[8] = { 0x01ce, 0x01c1,
+ 0x020f, 0x0202,
+ 0x03d0, 0x03c0,
+ 0x0013, 0x0005 };
+ int i, k;
+
+ /* 100M eye finetune:
+ * Keep middle level of TX MLT3 shapper as default.
+ * Only change TX MLT3 overshoot level here.
+ */
+ for (k = 0, i = 1; i < 12; i++) {
+ if (i % 3 == 0)
+ continue;
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
+ }
+
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ /* ResetSyncOffset = 6 */
+ __phy_write(phydev, 0x11, 0x600);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x8fc0);
+
+ /* VgaDecRate = 1 */
+ __phy_write(phydev, 0x11, 0x4c2a);
+ __phy_write(phydev, 0x12, 0x3e);
+ __phy_write(phydev, 0x10, 0x8fa4);
/* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
* MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
@@ -738,7 +784,7 @@ static void mt798x_phy_common_finetune(struct phy_device *phydev)
__phy_write(phydev, 0x10, 0x8ec0);
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/
+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
@@ -771,48 +817,6 @@ static void mt798x_phy_common_finetune(struct phy_device *phydev)
phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
}
-static void mt7981_phy_finetune(struct phy_device *phydev)
-{
- u16 val[8] = { 0x01ce, 0x01c1,
- 0x020f, 0x0202,
- 0x03d0, 0x03c0,
- 0x0013, 0x0005 };
- int i, k;
-
- /* 100M eye finetune:
- * Keep middle level of TX MLT3 shapper as default.
- * Only change TX MLT3 overshoot level here.
- */
- for (k = 0, i = 1; i < 12; i++) {
- if (i % 3 == 0)
- continue;
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
- }
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
- __phy_write(phydev, 0x11, 0xc71);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
- /* ResetSyncOffset = 6 */
- __phy_write(phydev, 0x11, 0x600);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
-
- /* VgaDecRate = 1 */
- __phy_write(phydev, 0x11, 0x4c2a);
- __phy_write(phydev, 0x12, 0x3e);
- __phy_write(phydev, 0x10, 0x8fa4);
-
- /* FfeUpdGainForce = 4 */
- __phy_write(phydev, 0x11, 0x240);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9680);
-
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-}
-
static void mt7988_phy_finetune(struct phy_device *phydev)
{
u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
@@ -827,17 +831,7 @@ static void mt7988_phy_finetune(struct phy_device *phydev)
/* TCT finetune */
phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
- /* Disable TX power saving */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
- MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
-
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */
- __phy_write(phydev, 0x11, 0x671);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
/* ResetSyncOffset = 5 */
__phy_write(phydev, 0x11, 0x500);
__phy_write(phydev, 0x12, 0x0);
@@ -845,13 +839,27 @@ static void mt7988_phy_finetune(struct phy_device *phydev)
/* VgaDecRate is 1 at default on mt7988 */
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+ /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
+ * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
+ */
+ __phy_write(phydev, 0x11, 0xb90a);
+ __phy_write(phydev, 0x12, 0x6f);
+ __phy_write(phydev, 0x10, 0x8f82);
+
+ /* RemAckCntLimitCtrl = 1 */
+ __phy_write(phydev, 0x11, 0xfbba);
+ __phy_write(phydev, 0x12, 0xc3);
+ __phy_write(phydev, 0x10, 0x87f8);
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30);
- /* TxClkOffset = 2 */
- __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK,
- FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
+
+ /* rg_tr_lpf_cnt_val = 1023 */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff);
}
static void mt798x_phy_eee(struct phy_device *phydev)
@@ -884,11 +892,11 @@ static void mt798x_phy_eee(struct phy_device *phydev)
MTK_PHY_LPI_SLV_SEND_TX_EN,
FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
- MTK_PHY_LPI_SEND_LOC_TIMER_MASK |
- MTK_PHY_LPI_TXPCS_LOC_RCV,
- FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117));
+ /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
+ MTK_PHY_LPI_TXPCS_LOC_RCV);
+ /* This also fixes some IoT issues, such as CH340 */
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
@@ -922,7 +930,7 @@ static void mt798x_phy_eee(struct phy_device *phydev)
__phy_write(phydev, 0x12, 0x0);
__phy_write(phydev, 0x10, 0x9690);
- /* REG_EEE_st2TrKf1000 = 3 */
+ /* REG_EEE_st2TrKf1000 = 2 */
__phy_write(phydev, 0x11, 0x114f);
__phy_write(phydev, 0x12, 0x2);
__phy_write(phydev, 0x10, 0x969a);
@@ -947,7 +955,7 @@ static void mt798x_phy_eee(struct phy_device *phydev)
__phy_write(phydev, 0x12, 0x0);
__phy_write(phydev, 0x10, 0x96b8);
- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */
+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
__phy_write(phydev, 0x11, 0x1463);
__phy_write(phydev, 0x12, 0x0);
__phy_write(phydev, 0x10, 0x96ca);
@@ -1459,6 +1467,13 @@ static int mt7988_phy_probe(struct phy_device *phydev)
if (err)
return err;
+ /* Disable TX power saving at probing to:
+ * 1. Meet common mode compliance test criteria
+ * 2. Make sure that TX-VCM calibration works fine
+ */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
+
return mt798x_phy_calibration(phydev);
}
--
2.43.0