[PATCH v2 1/2] dt-bindings: net: adin: add recovered clock output

[Fabian Pfitzner]

The ADIN1300 offers three distinct output clocks which can be accessed
through the GP_CLK pin. The DT only offers two of the possible options
and thus the 125MHz-recovered output clock is missing.

As there is no other way to configure this pin than through the DT it
should be possible to do so for all available outputs.

Signed-off-by: Fabian Pfitzner <f.pfitzner@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/adi,adin.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index 929cf8c0b0fd..04059393b756 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -38,14 +38,17 @@ properties:
 
   adi,phy-output-clock:
     description: |
-      Select clock output on GP_CLK pin. Two clocks are available:
-      A 25MHz reference and a free-running 125MHz.
+      Select clock output on GP_CLK pin. Three clocks are available:
+        - 25MHz reference
+        - free-running 125MHz
+        - recovered 125MHz
       The phy can alternatively automatically switch between the reference and
       the 125MHz clocks based on its internal state.
     $ref: /schemas/types.yaml#/definitions/string
     enum:
       - 25mhz-reference
       - 125mhz-free-running
+      - 125mhz-recovered
       - adaptive-free-running
 
   adi,phy-output-reference-clock:

base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
-- 
2.39.2