Re: [PATCH v2 2/2] net: phy: adin: add recovered clock output

[Nuno Sá]

On Wed, 2024-01-24 at 11:25 +0100, Fabian Pfitzner wrote:
> The ADIN1300 offers three distinct output clocks which can be accessed
> through the GP_CLK pin. The DT only offers two of the possible options
> and thus the 125MHz-recovered output clock is missing.
> 
> As there is no other way to configure this pin than through the DT it
> should be possible to do so for all available outputs.
> 
> Signed-off-by: Fabian Pfitzner <f.pfitzner@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>

>  drivers/net/phy/adin.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
> index 2e1a46e121d9..b1ed6fd24763 100644
> --- a/drivers/net/phy/adin.c
> +++ b/drivers/net/phy/adin.c
> @@ -508,6 +508,8 @@ static int adin_config_clk_out(struct phy_device *phydev)
>  		sel |= ADIN1300_GE_CLK_CFG_25;
>  	} else if (strcmp(val, "125mhz-free-running") == 0) {
>  		sel |= ADIN1300_GE_CLK_CFG_FREE_125;
> +	} else if (strcmp(val, "125mhz-recovered") == 0) {
> +		sel |= ADIN1300_GE_CLK_CFG_RCVR_125;
>  	} else if (strcmp(val, "adaptive-free-running") == 0) {
>  		sel |= ADIN1300_GE_CLK_CFG_HRT_FREE;
>  	} else {