Re: [PATCH] Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT

[Janaki Ramaiah Thota]

Hi Paul Menzel,
Thanks for the review, addressed comments in-lined.

On 1/23/2024 3:08 PM, Paul Menzel wrote:
> Dear Janaki,
>
>
> Thank you for your patch.
>
>
> Am 23.01.24 um 08:15 schrieb Janaki Ramaiah Thota:
> > This change is done to avoid BT not to go UNCONFIGURED state when BDA
>
> “This change is done to” is redundant, and can be left out.
Agreed, addressed in incremental patch.
> > fwnode is not available in DT for QTI SOCs.
>
> It’d be great if you documented the test setup exactly, on how to reproduce this.
>
> Please also add a Fixes: tag.
sure, addressed in incremental patch.
> > Signed-off-by: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
> > ---
> >   drivers/bluetooth/hci_qca.c | 13 ++++++++++++-
> >   1 file changed, 12 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> > index 94b8c406f0c0..11d66f3e5f3f 100644
> > --- a/drivers/bluetooth/hci_qca.c
> > +++ b/drivers/bluetooth/hci_qca.c
> > @@ -7,6 +7,7 @@
> >    *
> >    *  Copyright (C) 2007 Texas Instruments, Inc.
> >    *  Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
> > + *  Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> >    *
> >    *  Acknowledgements:
> >    *  This file is based on hci_ll.c, which was...
> > @@ -1904,7 +1905,17 @@ static int qca_setup(struct hci_uart *hu)
> >       case QCA_WCN6750:
> >       case QCA_WCN6855:
> >       case QCA_WCN7850:
> > -        set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> > +
> > +        /* Set BDA quirk bit for reading BDA value from fwnode property
> > +         * only if that property exist in DT.
> > +         */
> > +        if (fwnode_property_present(dev_fwnode(hdev->dev.parent), "local-bd-address")) {
> > +            set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> > +            bt_dev_info(hdev, "setting quirk bit to read BDA from fwnode later");
> > +        } else {
> > +            bt_dev_info(hdev, "Not setting quirk bit for BDA");
>
> In my opinion, the message in the else branch, should be a debug message, and should also contain that `local-bd-address` is not present in the devicetree..
Agreed, addressed in incremental patch.
> > +        }
> > +
> >           hci_set_aosp_capable(hdev);
> >           ret = qca_read_soc_version(hdev, &ver, soc_type);
> >
> > base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> > prerequisite-patch-id: de5460a6c886a233feff19313b545ee6569369fb
> > prerequisite-patch-id: e18252a26d0f289afcbec18113b7f636a46a9aed
> > prerequisite-patch-id: 26e607ac96dc6d0d295793a0449a5b4c0f7ddc92
> > prerequisite-patch-id: c8d7f229399fc8075722ffe05260675ece93f691
> > prerequisite-patch-id: 554cc93ba4899eabe31585bf9591052058609d96
> > prerequisite-patch-id: 99c00a3d8d98a880c0d3a5545def0ca9ade0f903
> > prerequisite-patch-id: b1ef1add471677d1e1b60eaaab3e109abf7c7b2b
> > prerequisite-patch-id: 96131754c09914f327f353dee4daabb7ab5e6f29
> > prerequisite-patch-id: 610b5ec4a338d15cf8dba0459d5a1bfd28dccb4d
> > prerequisite-patch-id: 5172cd9d99462e123f264f0fd9a9768f2cae5498
> > prerequisite-patch-id: f57b8285516730da78089325d53f6125daaf2e6a
> > prerequisite-patch-id: 69dc26e36476660935070261f0e11cdd55c35688
> > prerequisite-patch-id: 8087dd28f6ef90fc3ad847b4bcde8a096ff721b5
> > prerequisite-patch-id: 8640fbfd7e5dcbdb4eacf5b748ea49678a2e6675
> > prerequisite-patch-id: b3613c0002cfd9cc77923f6ce781cec90a2f0cd1
> > prerequisite-patch-id: dc4f4077bfa02a5d5128bb39ef3a36dfc3db27bc
> > prerequisite-patch-id: 9c9aa8de9b4c50252d451a2dd76717c287fe1848
> > prerequisite-patch-id: 3c4a931debe7e8aa7d0b70870456421a17ff86a5
> > prerequisite-patch-id: df500031c7b6de9320021d52b060338b71340d91
> > prerequisite-patch-id: 14758d2fb4b6151aa9c27ab7e3cb8c742988f1d7
> > prerequisite-patch-id: 1c28faa0d8a4e294752229611ade87a216da0ce6
> > prerequisite-patch-id: 03680549373d9a5b0ab0e4c94260e8aaea04ef25
> > prerequisite-patch-id: cfcc27083466c9c87801628fe9c0f2131fc22dae
>
> What to do about these lines?
These are auto generated, not related to change.
> Kind regards,
>
> PPaul