Re: [PATCH net] net: stmmac: xgmac: fix handling of DPP safety error for DMA channels

[Furong Xu]

On Wed, 24 Jan 2024 17:36:10 +0300
Serge Semin <fancer.lancer@xxxxxxxxx> wrote:

> On Tue, Jan 23, 2024 at 05:50:06PM +0800, Furong Xu wrote:
> > Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
> > XGMAC core") checks and reports safety errors, but leaves the
> > Data Path Parity Errors for each channel in DMA unhandled at all, lead to
> > a storm of interrupt.
> > Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.
> > 
> > Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core")
> > Signed-off-by: Furong Xu <0x1207@xxxxxxxxx>
> > ---
> >  drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h      | 1 +
> >  drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 6 ++++++
> >  2 files changed, 7 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > index 207ff1799f2c..188e11683136 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > @@ -385,6 +385,7 @@
> >  #define XGMAC_DCEIE			BIT(1)
> >  #define XGMAC_TCEIE			BIT(0)
> >  #define XGMAC_DMA_ECC_INT_STATUS	0x0000306c
> > +#define XGMAC_DMA_DPP_INT_STATUS	0x00003074
> >  #define XGMAC_DMA_CH_CONTROL(x)		(0x00003100 + (0x80 * (x)))
> >  #define XGMAC_SPH			BIT(24)
> >  #define XGMAC_PBLx8			BIT(16)
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > index eb48211d9b0e..874e85b499e2 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > @@ -745,6 +745,12 @@ static void dwxgmac3_handle_mac_err(struct net_device *ndev,
> >  
> >  	dwxgmac3_log_error(ndev, value, correctable, "MAC",
> >  			   dwxgmac3_mac_errors, STAT_OFF(mac_errors), stats);
> > +
> > +	value = readl(ioaddr + XGMAC_DMA_DPP_INT_STATUS);
> > +	writel(value, ioaddr + XGMAC_DMA_DPP_INT_STATUS);
> > +
> > +	if (value)
> > +		netdev_err(ndev, "Found DMA_DPP error, status: 0x%x\n", value);  
> 
> 1. Why not to implement this in the same way as the rest of the safety
> errors handle code? (with the flags described by the
> dwxgmac3_error_desc-based table and the respective counters being
> incremented should the errors were detected)
> 
XGMAC_DMA_DPP_INT_STATUS is just a bitmap of DMA RX and TX channels,
bottom 16 bits for 16 DMA TX channels and top 16 bits for 16 DMA RX channels.
No other descriptions.

And the counters should be updated, I will send a new patch.

> 2. I don't see this IRQ being enabled in the dwxgmac3_safety_feat_config()
> method. How come the respective event has turned to be triggered
> anyway?
This error report is enabled by default, and cannot be disabled or marked(as Synopsys Databook says).
What we can do is clearing it when it asserts.
> 
> -Serge(y) 
> 
> >  }
> >  
> >  static const struct dwxgmac3_error_desc dwxgmac3_mtl_errors[32]= {
> > -- 
> > 2.34.1
> > 
> >