[PATCH v3 0/2] Add PM8010 regulators for sm8650 boards.

[Fenglin Wu via B4 Relay]

Add PM8010 RPMh regulators for sm8650-mtp and sm8650-qrd boards.

Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
---
Changes in v3:
- Split vdd-l6-l7 supply for regulator-6, and split vdd-l5-l6 for regulator-7,
  as vdd-[5-7]-supply is defined in the driver seperately.
- Add regulator-allow-set-load and regulator-allowed-modes for LDO1/LDO2
  as they are the only LDOs support mode transition in PM8010.
- Link to v2: https://lore.kernel.org/r/20240123-sm8650_pm8010_support-v2-0-52f517b20a1d@xxxxxxxxxxx

Changes in v2:
- Added Reviewed-by/Tested-by trailers
- Link to v1: https://lore.kernel.org/r/20240123-sm8650_pm8010_support-v1-0-dec2224d5740@xxxxxxxxxxx

---
Fenglin Wu (2):
      arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
      arm64: dts: qcom: sm8650-qrd: add PM8010 regulators

 arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 132 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 132 ++++++++++++++++++++++++++++++++
 2 files changed, 264 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240123-sm8650_pm8010_support-750c05a5cd5d

Best regards,
-- 
Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>