Re: [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support

[Frank Li]

On Fri, Jan 19, 2024 at 12:11:06PM -0500, Frank Li wrote:
> first 6 patches use drvdata: flags to simplify some switch-case code.
> Improve maintaince and easy to read code.

@lpieralisi:

	Could you please pick up these patches? All already reviewed by
Mani. dt-binding part acked by rob/krzysztof. Add it only impact freecale
imx platform.

Frank

> 
> Then add imx95 basic pci host function.
> 
> follow two patch do endpoint code clean up.
> Then add imx95 basic endpont function.
> 
> Compared with v2, added EP function support and some fixes,  please change
> notes at each patches.
> 
> dt-binding pass pcie node:
> 
> pcie0: pcie@4c300000 {
>                         compatible = "fsl,imx95-pcie";
>                         reg = <0 0x4c300000 0 0x40000>,
>                                 <0 0x4c360000 0 0x10000>,
>                                 <0 0x4c340000 0 0x20000>,
>                                 <0 0x60100000 0 0xfe00000>;
>                         reg-names = "dbi", "atu", "app", "config";
>                         #address-cells = <3>;
>                         #size-cells = <2>;
>                         device_type = "pci";
>                         linux,pci-domain = <0>;
>                         bus-range = <0x00 0xff>;
>                         ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
>                                  <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
>                         num-lanes = <1>;
>                         num-viewport = <8>;
>                         interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
>                         interrupt-names = "msi";
>                         #interrupt-cells = <1>;
>                         interrupt-map-mask = <0 0 0 0x7>;
>                         interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
>                                         <0 0 0 2 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
>                                         <0 0 0 3 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
>                                         <0 0 0 4 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>                         fsl,max-link-speed = <3>;
>                         clocks = <&scmi_clk IMX95_CLK_HSIO>,
>                                  <&scmi_clk IMX95_CLK_HSIOPLL>,
>                                  <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
>                                  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
>                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
>                         assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
>                                          <&scmi_clk IMX95_CLK_HSIOPLL>,
>                                          <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
>                         assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
>                         assigned-clock-parents = <0>, <0>,
>                                                  <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
>                         power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
>                         /* 0x30~0x37 stream id for pci0 */
>                         /*
>                          * iommu-map = <0x000 &apps_smmu 0x30 0x1>,
>                          * <0x100 &apps_smmu 0x31 0x1>;
>                          */
>                         status = "disabled";
>                 };
> 
> pcie1: pcie-ep@4c380000 {
>                         compatible = "fsl,imx95-pcie-ep";
>                         reg = <0 0x4c380000 0 0x20000>,
>                               <0 0x4c3e0000 0 0x1000>,
>                               <0 0x4c3a0000 0 0x1000>,
>                               <0 0x4c3c0000 0 0x10000>,
>                               <0 0x4c3f0000 0 0x10000>,
>                               <0xa 0 1 0>;
>                         reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
>                         interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
>                         interrupt-names = "dma";
>                         fsl,max-link-speed = <3>;
>                         clocks = <&scmi_clk IMX95_CLK_HSIO>,
>                                  <&scmi_clk IMX95_CLK_HSIOPLL>,
>                                  <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
>                                  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
>                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
>                         assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
>                                          <&scmi_clk IMX95_CLK_HSIOPLL>,
>                                          <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
>                         assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
>                         assigned-clock-parents = <0>, <0>,
>                                                  <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
>                         power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
>                         status = "disabled";
>                 };
> 
> Frank Li (15):
>   PCI: imx6: Simplify clock handling by using clk_bulk*() function
>   PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV
>   PCI: imx6: Simplify reset handling by using by using
>     *_FLAG_HAS_*_RESET
>   dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ
>   PCI: imx6: Using "linux,pci-domain" as slot ID
>   PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask
>   PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
>   PCI: imx6: Simplify switch-case logic by involve init_phy callback
>   dt-bindings: imx6q-pcie: Clean up irrationality clocks check
>   dt-bindings: imx6q-pcie: Restruct reg and reg-name
>   PCI: imx6: Add iMX95 PCIe Root Complex support
>   PCI: imx6: Clean up get addr_space code
>   PCI: imx6: Add epc_features in imx6_pcie_drvdata
>   dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string
>   PCI: imx6: Add iMX95 Endpoint (EP) support
> 
> Richard Zhu (1):
>   dt-bindings: imx6q-pcie: Add imx95 pcie compatible string
> 
>  .../bindings/pci/fsl,imx6q-pcie-common.yaml   |  28 +-
>  .../bindings/pci/fsl,imx6q-pcie-ep.yaml       |  57 +-
>  .../bindings/pci/fsl,imx6q-pcie.yaml          |  49 +-
>  drivers/pci/controller/dwc/pci-imx6.c         | 640 ++++++++++--------
>  4 files changed, 462 insertions(+), 312 deletions(-)
> 
> -- 
> 2.34.1
>