Re: [PATCH] arm64: dts: qcom: sm6350: Add tsens thermal zones

[Konrad Dybcio]

On 1/24/24 16:31, Luca Weiss wrote:
> Add the definitions for the various thermal zones found on the SM6350
> SoC. Hooking up GPU and CPU cooling can limit the clock speeds there to
> reduce the temperature again to good levels.
>
> Most thermal zones only have one critical temperature configured at
> 125°C which can be mostly considered a placeholder until those zones can
> be hooked up to cooling.
>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---

[...]

> +		cpuss0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 7>;

cpuss0-thermal and cpuss1-thermal are very likely the sensors for
cluster0/1, can you test that out, perhaps with corepinning+stress?

You can then assign multiple cpu cooling devices.

LGTM otherwise!


Konrad