[tip: x86/fred] x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
From: tip-bot2 for Xin Li
Date: Thu Jan 25 2024 - 13:22:20 EST
The following commit has been merged into the x86/fred branch of tip:
Commit-ID: 9a823c61c212a9f076abc4b95ca2cbc328fbed01
Gitweb: https://git.kernel.org/tip/9a823c61c212a9f076abc4b95ca2cbc328fbed01
Author: Xin Li <xin3.li@xxxxxxxxx>
AuthorDate: Tue, 05 Dec 2023 02:50:20 -08:00
Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitterDate: Thu, 25 Jan 2024 19:10:33 +01:00
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
In IRQ/NMI induced VM exits, KVM VMX needs to execute the respective
handlers, which requires the software to create a FRED stack frame,
and use it to invoke the handlers. Add fred_irq_entry_from_kvm() for
this job.
Export fred_entry_from_kvm() because VMX can be compiled as a module.
Suggested-by: Sean Christopherson <seanjc@xxxxxxxxxx>
Suggested-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Xin Li <xin3.li@xxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Tested-by: Shan Kang <shan.kang@xxxxxxxxx>
Link: https://lore.kernel.org/r/20231205105030.8698-32-xin3.li@xxxxxxxxx
---
arch/x86/entry/entry_64_fred.S | 77 +++++++++++++++++++++++++++++++++-
arch/x86/entry/entry_fred.c | 14 ++++++-
arch/x86/include/asm/fred.h | 18 ++++++++-
3 files changed, 109 insertions(+)
diff --git a/arch/x86/entry/entry_64_fred.S b/arch/x86/entry/entry_64_fred.S
index d1c2fc4..eedf98d 100644
--- a/arch/x86/entry/entry_64_fred.S
+++ b/arch/x86/entry/entry_64_fred.S
@@ -3,8 +3,11 @@
* The actual FRED entry points.
*/
+#include <linux/export.h>
+
#include <asm/asm.h>
#include <asm/fred.h>
+#include <asm/segment.h>
#include "calling.h"
@@ -54,3 +57,77 @@ SYM_CODE_START_NOALIGN(asm_fred_entrypoint_kernel)
FRED_EXIT
ERETS
SYM_CODE_END(asm_fred_entrypoint_kernel)
+
+#if IS_ENABLED(CONFIG_KVM_INTEL)
+SYM_FUNC_START(asm_fred_entry_from_kvm)
+ push %rbp
+ mov %rsp, %rbp
+
+ UNWIND_HINT_SAVE
+
+ /*
+ * Both IRQ and NMI from VMX can be handled on current task stack
+ * because there is no need to protect from reentrancy and the call
+ * stack leading to this helper is effectively constant and shallow
+ * (relatively speaking). Do the same when FRED is active, i.e., no
+ * need to check current stack level for a stack switch.
+ *
+ * Emulate the FRED-defined redzone and stack alignment.
+ */
+ sub $(FRED_CONFIG_REDZONE_AMOUNT << 6), %rsp
+ and $FRED_STACK_FRAME_RSP_MASK, %rsp
+
+ /*
+ * Start to push a FRED stack frame, which is always 64 bytes:
+ *
+ * +--------+-----------------+
+ * | Bytes | Usage |
+ * +--------+-----------------+
+ * | 63:56 | Reserved |
+ * | 55:48 | Event Data |
+ * | 47:40 | SS + Event Info |
+ * | 39:32 | RSP |
+ * | 31:24 | RFLAGS |
+ * | 23:16 | CS + Aux Info |
+ * | 15:8 | RIP |
+ * | 7:0 | Error Code |
+ * +--------+-----------------+
+ */
+ push $0 /* Reserved, must be 0 */
+ push $0 /* Event data, 0 for IRQ/NMI */
+ push %rdi /* fred_ss handed in by the caller */
+ push %rbp
+ pushf
+ mov $__KERNEL_CS, %rax
+ push %rax
+
+ /*
+ * Unlike the IDT event delivery, FRED _always_ pushes an error code
+ * after pushing the return RIP, thus the CALL instruction CANNOT be
+ * used here to push the return RIP, otherwise there is no chance to
+ * push an error code before invoking the IRQ/NMI handler.
+ *
+ * Use LEA to get the return RIP and push it, then push an error code.
+ */
+ lea 1f(%rip), %rax
+ push %rax /* Return RIP */
+ push $0 /* Error code, 0 for IRQ/NMI */
+
+ PUSH_AND_CLEAR_REGS clear_bp=0 unwind_hint=0
+ movq %rsp, %rdi /* %rdi -> pt_regs */
+ call __fred_entry_from_kvm /* Call the C entry point */
+ POP_REGS
+ ERETS
+1:
+ /*
+ * Objtool doesn't understand what ERETS does, this hint tells it that
+ * yes, we'll reach here and with what stack state. A save/restore pair
+ * isn't strictly needed, but it's the simplest form.
+ */
+ UNWIND_HINT_RESTORE
+ pop %rbp
+ RET
+
+SYM_FUNC_END(asm_fred_entry_from_kvm)
+EXPORT_SYMBOL_GPL(asm_fred_entry_from_kvm);
+#endif
diff --git a/arch/x86/entry/entry_fred.c b/arch/x86/entry/entry_fred.c
index ed2146d..76aefe0 100644
--- a/arch/x86/entry/entry_fred.c
+++ b/arch/x86/entry/entry_fred.c
@@ -255,3 +255,17 @@ __visible noinstr void fred_entry_from_kernel(struct pt_regs *regs)
return fred_bad_type(regs, error_code);
}
+
+#if IS_ENABLED(CONFIG_KVM_INTEL)
+__visible noinstr void __fred_entry_from_kvm(struct pt_regs *regs)
+{
+ switch (regs->fred_ss.type) {
+ case EVENT_TYPE_EXTINT:
+ return fred_extint(regs);
+ case EVENT_TYPE_NMI:
+ return fred_exc_nmi(regs);
+ default:
+ WARN_ON_ONCE(1);
+ }
+}
+#endif
diff --git a/arch/x86/include/asm/fred.h b/arch/x86/include/asm/fred.h
index 16a64ff..2fa9f34 100644
--- a/arch/x86/include/asm/fred.h
+++ b/arch/x86/include/asm/fred.h
@@ -9,6 +9,7 @@
#include <linux/const.h>
#include <asm/asm.h>
+#include <asm/trapnr.h>
/*
* FRED event return instruction opcodes for ERET{S,U}; supported in
@@ -62,12 +63,29 @@ static __always_inline unsigned long fred_event_data(struct pt_regs *regs)
void asm_fred_entrypoint_user(void);
void asm_fred_entrypoint_kernel(void);
+void asm_fred_entry_from_kvm(struct fred_ss);
__visible void fred_entry_from_user(struct pt_regs *regs);
__visible void fred_entry_from_kernel(struct pt_regs *regs);
+__visible void __fred_entry_from_kvm(struct pt_regs *regs);
+
+/* Can be called from noinstr code, thus __always_inline */
+static __always_inline void fred_entry_from_kvm(unsigned int type, unsigned int vector)
+{
+ struct fred_ss ss = {
+ .ss =__KERNEL_DS,
+ .type = type,
+ .vector = vector,
+ .nmi = type == EVENT_TYPE_NMI,
+ .lm = 1,
+ };
+
+ asm_fred_entry_from_kvm(ss);
+}
#else /* CONFIG_X86_FRED */
static __always_inline unsigned long fred_event_data(struct pt_regs *regs) { return 0; }
+static __always_inline void fred_entry_from_kvm(unsigned int type, unsigned int vector) { }
#endif /* CONFIG_X86_FRED */
#endif /* !__ASSEMBLY__ */