[PATCH] mmc: pwrseq: Use proper reboot notifier path

[Andrew Davis]

This driver registers itself as a reboot handler, which means it claims
it can reboot the system. It does this so it is called during the system
reboot sequence. The correct way to be notified during the reboot
sequence is to register a notifier with register_reboot_notifier().
Do this here.

Note this will be called during normal reboots but not emergency reboots.
This is the expected behavior, emergency reboot means emergency, not go
do some cleanup with emmc pins.. The reboot notifiers are intentionally
not called in the emergency path for a reason and working around that by
pretending to be a reboot handler is a hack.

Signed-off-by: Andrew Davis <afd@xxxxxx>
---
 drivers/mmc/core/pwrseq_emmc.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c
index 3b6d69cefb4eb..d5045fd1a02c1 100644
--- a/drivers/mmc/core/pwrseq_emmc.c
+++ b/drivers/mmc/core/pwrseq_emmc.c
@@ -70,14 +70,8 @@ static int mmc_pwrseq_emmc_probe(struct platform_device *pdev)
 		return PTR_ERR(pwrseq->reset_gpio);
 
 	if (!gpiod_cansleep(pwrseq->reset_gpio)) {
-		/*
-		 * register reset handler to ensure emmc reset also from
-		 * emergency_reboot(), priority 255 is the highest priority
-		 * so it will be executed before any system reboot handler.
-		 */
 		pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb;
-		pwrseq->reset_nb.priority = 255;
-		register_restart_handler(&pwrseq->reset_nb);
+		register_reboot_notifier(&pwrseq->reset_nb);
 	} else {
 		dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n");
 	}
-- 
2.39.2