[PATCH 0/5] LLCC: Support for Broadcast_AND region

[Unnathi Chalicheemala]

This series adds:
1. Device tree register mapping for Broadcast_AND region in SM8450,
SM8550, SM8650.
2. LLCC driver updates to reflect addition of Broadcast_AND regmap.

To support CSR programming, a broadcast interface is used to program all
channels in a single command. Until SM8450 there was only one broadcast
region (Broadcast_OR) used to broadcast write and check for status bit
0. From SM8450 onwards another broadcast region (Broadcast_AND) has been
added which checks for status bit 1.

This series updates the device trees from SM8450 onwards to have a
mapping to this Broadcast_AND region. It also updates the llcc_drv_data
structure with a regmap for Broadcast_AND region and corrects the
broadcast region used to check for status bit 1.

Merging strategy
----------------

All patches should be merged due to LLCC DeviceTree/driver dependency.

Unnathi Chalicheemala (5):
  dt-bindings: arm: msm: Add llcc Broadcast_AND register region
  arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region
  arm64: dts: qcom: sm8550: Add mapping to llcc Broadcast_AND region
  arm64: dts: qcom: sm8650: Add mapping to llcc Broadcast_AND region
  soc: qcom: llcc: Add regmap for Broadcast_AND region

 .../devicetree/bindings/cache/qcom,llcc.yaml  | 27 ++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  5 ++--
 arch/arm64/boot/dts/qcom/sm8550.dtsi          |  6 +++--
 arch/arm64/boot/dts/qcom/sm8650.dtsi          |  6 +++--
 drivers/soc/qcom/llcc-qcom.c                  | 12 ++++++++-
 include/linux/soc/qcom/llcc-qcom.h            |  4 ++-
 6 files changed, 51 insertions(+), 9 deletions(-)

-- 
2.25.1

Best Regards,
Unnathi