Re: [PATCH 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region

From: Dmitry Baryshkov
Date: Fri Jan 26 2024 - 15:30:20 EST


On Fri, 26 Jan 2024 at 21:48, Unnathi Chalicheemala
<quic_uchalich@xxxxxxxxxxx> wrote:
>
> To support CSR programming, a broadcast interface is used to program
> all channels in a single command. Until SM8450 there was only one
> broadcast region (Broadcast_OR) used to broadcast write and check
> for status bit 0. From SM8450 onwards another broadcast region
> (Broadcast_AND) has been added which checks for status bit 1.
>
> Update llcc_drv_data structure with new regmap for Broadcast_AND
> region and initialize regmap for Broadcast_AND region when HW block
> version is greater than 4.1 for backwards compatibility.
>
> Switch from broadcast_OR to broadcast_AND region for checking
> status bit 1 as Broadcast_OR region checks only for bit 0.

This breaks backwards compatibility with the existing DT files, doesn't it?

> While at it, also check return value after reading Broadcast_OR
> region in llcc_update_act_ctrl().

Separate patch, Fixes tag.

>
> Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
> ---
> drivers/soc/qcom/llcc-qcom.c | 12 +++++++++++-
> include/linux/soc/qcom/llcc-qcom.h | 4 +++-
> 2 files changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index 4ca88eaebf06..5a2dac2d4772 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -849,7 +849,7 @@ static int llcc_update_act_ctrl(u32 sid,
> return ret;
>
> if (drv_data->version >= LLCC_VERSION_4_1_0_0) {
> - ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg,
> + ret = regmap_read_poll_timeout(drv_data->bcast_and_regmap, status_reg,
> slice_status, (slice_status & ACT_COMPLETE),
> 0, LLCC_STATUS_READ_DELAY);
> if (ret)
> @@ -859,6 +859,8 @@ static int llcc_update_act_ctrl(u32 sid,
> ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg,
> slice_status, !(slice_status & status),
> 0, LLCC_STATUS_READ_DELAY);
> + if (ret)
> + return ret;
>
> if (drv_data->version >= LLCC_VERSION_4_1_0_0)
> ret = regmap_write(drv_data->bcast_regmap, act_clear_reg,
> @@ -1282,6 +1284,14 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>
> drv_data->version = version;
>
> + if (drv_data->version >= LLCC_VERSION_4_1_0_0) {
> + drv_data->bcast_and_regmap = qcom_llcc_init_mmio(pdev, i + 1, "llcc_broadcast_and_base");
> + if (IS_ERR(drv_data->bcast_and_regmap)) {
> + ret = PTR_ERR(drv_data->bcast_and_regmap);
> + goto err;
> + }
> + }
> +
> llcc_cfg = cfg->sct_data;
> sz = cfg->size;
>
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> index 1a886666bbb6..9e9f528b1370 100644
> --- a/include/linux/soc/qcom/llcc-qcom.h
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -115,7 +115,8 @@ struct llcc_edac_reg_offset {
> /**
> * struct llcc_drv_data - Data associated with the llcc driver
> * @regmaps: regmaps associated with the llcc device
> - * @bcast_regmap: regmap associated with llcc broadcast offset
> + * @bcast_regmap: regmap associated with llcc broadcast OR offset
> + * @bcast_and_regmap: regmap associated with llcc broadcast AND offset
> * @cfg: pointer to the data structure for slice configuration
> * @edac_reg_offset: Offset of the LLCC EDAC registers
> * @lock: mutex associated with each slice
> @@ -129,6 +130,7 @@ struct llcc_edac_reg_offset {
> struct llcc_drv_data {
> struct regmap **regmaps;
> struct regmap *bcast_regmap;
> + struct regmap *bcast_and_regmap;
> const struct llcc_slice_config *cfg;
> const struct llcc_edac_reg_offset *edac_reg_offset;
> struct mutex lock;
> --
> 2.25.1
>
>


--
With best wishes
Dmitry