[PATCH net-next v2 0/8] netconsole: Add userdata append support

From: Matthew Wood
Date: Fri Jan 26 2024 - 18:14:03 EST


Add the ability to add custom userdata to every outbound netconsole message
as a collection of key/value pairs, allowing users to add metadata to every
netconsole message which can be used for for tagging, filtering, and
aggregating log messages.

In a previous patch series the ability to prepend the uname release was
added towards the goals above. This patch series builds on that
idea to allow any userdata, keyed by a user provided name, to be
included in netconsole messages.

If CONFIG_NETCONSOLE_DYNAMIC is enabled an additional userdata
directory will be presented in the netconsole configfs tree, allowing
the addition of userdata entries.

/sys/kernel/config/netconsole/
<target>/
enabled
release
dev_name
local_port
remote_port
local_ip
remote_ip
local_mac
remote_mac
userdata/
<key>/
value
<key>/
value
...

v1->v2:
* Updated netconsole_target docs, kdoc is now clean

--------

Testing for this series is as follows:

Build every patch without CONFIG_NETCONSOLE_DYNAMIC, and also built
with CONFIG_NETCONSOLE_DYNAMIC enabled for every patch after the config
option was added

Test Userdata configfs

# Adding userdata
cd /sys/kernel/config/netconsole/ && mkdir cmdline0 && cd cmdline0
mkdir userdata/release && echo hotfix1 > userdata/release/value
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail
mkdir userdata/testing && echo something > userdata/testing/value
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'release=hotfix1\ntesting=something' ]] && echo pass || echo fail
#
# Removing Userdata
rmdir userdata/testing
preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
[[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail
rmdir userdata/release
[[ `cat userdata/complete` == $'release=hotfix1' ]] && echo pass || echo fail
#
# Adding userdata key with too large of 6.7.0-rc8-virtme,12,481,17954104,-directory name [<54 chars]
mkdir userdata/testing12345678901234567890123456789012345678901234567890
[[ $? == 1 ]] && echo pass || echo fail
#
# Adding userdata value with too large of value [<200 chars]
mkdir userdata/testing
echo `for i in {1..201};do printf "%s" "v";done` > userdata/testing/value
[[ $? == 1 ]] && echo pass || echo fail
rmdir userdata/testing

- Output:

pass
pass
pass
pass
pass
mkdir: cannot create directory ‘cmdline0/userdata/testing12345678901234567890123456789012345678901234567890’: File name too long
pass
bash: echo: write error: Message too long
pass

Test netconsole messages (w/ msg fragmentation)

echo `for i in {1..996};do printf "%s" "v";done` > /dev/kmsg

- Output:

6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=0/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=952/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

Test empty userdatum

cd /sys/kernel/config/netconsole/ && mkdir cmdline0
mkdir cmdline0/userdata/empty
echo test > /dev/kmsg
rmdir cmdline0/userdata/empty

- Output:

Test netconsole messages (w/o userdata fragmentation)

cd /sys/kernel/config/netconsole/ && mkdir cmdline0
mkdir cmdline0/userdata/release && echo hotfix1 > cmdline0/userdata/release/value
mkdir cmdline0/userdata/testing && echo something > cmdline0/userdata/testing/value
echo test > /dev/kmsg
rmdir cmdline0/userdata/release
rmdir cmdline0/userdata/testing

- Output:
6.7.0-rc8-virtme,12,500,1646292204,-;test
release=hotfix1
testing=something

Test netconsole messages (w/ long body fragmentation)
cd /sys/kernel/config/netconsole/ && mkdir cmdline0
mkdir cmdline0/userdata/release && echo hotfix1 > cmdline0/userdata/release/value
mkdir cmdline0/userdata/testing && echo something > cmdline0/userdata/testing/value
echo `for i in {1..996};do printf "%s" "v";done` > /dev/kmsg
rmdir cmdline0/userdata/release
rmdir cmdline0/userdata/testing

- Output:
6.7.0-rc8-virtme,12,486,156664417,-,ncfrag=0/1031;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv6.7.0-rc8-virtme,12,486,156664417,-,ncfrag=950/1031;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
release=hotfix1
testing=something

Test netconsole messages (w/ long userdata fragmentation)

cd /sys/kernel/config/netconsole/ && mkdir cmdline0
LOREM="Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut"
for i in {0..5}; do mkdir cmdline0/userdata/value${i} && echo ${LOREM} > cmdline0/userdata/value${i}/value; done
echo test > /dev/kmsg
for i in {0..5}; do rmdir cmdline0/userdata/value${i}; done

- Output:
6.7.0-rc8-virtme,12,487,221763007,-,ncfrag=0/1241;test
value0=Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut
value1=Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut
value2=Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut
value3=Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut
value4=Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magn6.7.0-rc8-virtme,12,487,221763007,-,ncfrag=950/1241;a aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut
value5=Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut


Matthew Wood (8):
net: netconsole: cleanup formatting lints
net: netconsole: move netconsole_target config_item to config_group
net: netconsole: move newline trimming to function
net: netconsole: add docs for appending netconsole user data
net: netconsole: add a userdata config_group member to
netconsole_target
net: netconsole: cache userdata formatted string in netconsole_target
net: netconsole: append userdata to netconsole messages
net: netconsole: append userdata to fragmented netconsole messages

Documentation/networking/netconsole.rst | 68 +++++
drivers/net/netconsole.c | 360 ++++++++++++++++++++----
2 files changed, 373 insertions(+), 55 deletions(-)

--
2.43.0