Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers

[Pavel Machek]

Hi!

> > This led-controller supports 3 pattern controllers for auto breathing or
> > group dimming control. Each pattern controller can work in auto
> > breathing or manual control mode. All breathing parameters including
> > rising/falling slope, on/off time, repeat times, min/max brightness
> > and so on are configurable.
> > 
> > Signed-off-by: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxxxxx>
> > ---
> >  .../testing/sysfs-class-led-driver-aw200xx    | 108 +++
> >  Documentation/leds/leds-aw200xx.rst           | 274 ++++++++
> >  drivers/leds/leds-aw200xx.c                   | 649 ++++++++++++++++++
> >  3 files changed, 1031 insertions(+)
> >  create mode 100644 Documentation/leds/leds-aw200xx.rst
> 
> This interface is bananas.  Exposing an entire register interface to
> sysfs does not sit will with me at all.  When we add support to a sysfs
> class, we usually require it to be generic and work across all devices.
> Adding device specific interfaces is generally decried and to be
> avoided.  Don't forget, once we commit something to sysfs, it becomes
> ABI and we have to support it forever.

If you do git grep hw_pattern, you should get pointers to qcom-lpg
driver that solves similar problem, with interface that should be
acceptable.

Best regards,
								Pavel