Re: [PATCH 4/5] arm64: dts: exynos: gs101: use correct clocks for usi_uart

[Sam Protsenko]

On Fri, Jan 26, 2024 at 6:37 PM André Draszik <andre.draszik@xxxxxxxxxx> wrote:
>
> Wrong pclk clocks have been used in this usi8 instance here. For USI
> and UART, we need the ipclk and pclk, where pclk is the bus clock.
> Without it, nothing can work.

Missing empty line?

> It is unclear what exactly is using USI0_UART_CLK, but it is not
> required for the IP to be operational at this stage, while pclk is.
> This also brings the DT in line with the clock names expected by the
> usi and uart drivers.
>
> Update the DTSI accordingly.
>
> Fixes: d97b6c902a40 ("arm64: dts: exynos: gs101: update USI UART to use peric0 clocks")
> Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
> ---

Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>

>  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> index e5b665be2d62..f93e937d2726 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -410,7 +410,7 @@ usi_uart: usi@10a000c0 {
>                         ranges;
>                         #address-cells = <1>;
>                         #size-cells = <1>;
> -                       clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
> +                       clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
>                                  <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
>                         clock-names = "pclk", "ipclk";
>                         samsung,sysreg = <&sysreg_peric0 0x1020>;
> @@ -422,7 +422,7 @@ serial_0: serial@10a00000 {
>                                 reg = <0x10a00000 0xc0>;
>                                 interrupts = <GIC_SPI 634
>                                               IRQ_TYPE_LEVEL_HIGH 0>;
> -                               clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
> +                               clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
>                                          <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
>                                 clock-names = "uart", "clk_uart_baud0";
>                                 samsung,uart-fifosize = <256>;
> --
> 2.43.0.429.g432eaa2c6b-goog
>