Re: [net-next PATCH v10 0/5] net: phy: generic polarity + LED support for qca808x

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Thu, 25 Jan 2024 21:36:56 +0100 you wrote:
> This small series add LEDs support for qca808x.
> 
> QCA808x apply on PHY reset a strange polarity settings and require
> some tweak to apply a more common configuration found on devices.
> On adding support for it, it was pointed out that a similar
> feature is also being implemented for a marvell PHY where
> LED polarity is set per LED (and not global) and also have
> a special mode where the LED is tristated.
> 
> [...]

Here is the summary with links:
  - [net-next,v10,1/5] dt-bindings: net: phy: Make LED active-low property common
    https://git.kernel.org/netdev/net-next/c/c94d1783136e
  - [net-next,v10,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
    https://git.kernel.org/netdev/net-next/c/355c6dc37efa
  - [net-next,v10,3/5] net: phy: add support for PHY LEDs polarity modes
    https://git.kernel.org/netdev/net-next/c/7ae215ee7bb8
  - [net-next,v10,4/5] dt-bindings: net: Document QCA808x PHYs
    https://git.kernel.org/netdev/net-next/c/91e893b43d1c
  - [net-next,v10,5/5] net: phy: at803x: add LED support for qca808x
    https://git.kernel.org/netdev/net-next/c/7196062b64ee

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html