[PATCH v3 09/10] clk: qcom: Add TCSR clock driver for x1e80100
From: Abel Vesa
Date: Sun Jan 28 2024 - 17:55:25 EST
The TCSR clock controller found on X1E80100 provides refclks
for PCIE, USB and UFS. Add clock driver for it.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/Kconfig | 8 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/tcsrcc-x1e80100.c | 285 +++++++++++++++++++++++++++++++++++++
3 files changed, 294 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d66934ca5e94..0633728c870c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -49,6 +49,14 @@ config CLK_X1E80100_GPUCC
Say Y if you want to support graphics controller devices and
functionality such as 3D graphics.
+config CLK_X1E80100_TCSRCC
+ tristate "X1E80100 TCSR Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select QCOM_GDSC
+ help
+ Support for the TCSR clock controller on X1E80100 devices.
+ Say Y if you want to use peripheral devices such as SD/UFS.
+
config QCOM_A53PLL
tristate "MSM8916 A53 PLL"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index a037a29e9d61..750b084553c6 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
+obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
new file mode 100644
index 000000000000..ff61769a0807
--- /dev/null
+++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
+
+#include "clk-branch.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "reset.h"
+
+enum {
+ DT_BI_TCXO_PAD,
+};
+
+static struct clk_branch tcsr_edp_clkref_en = {
+ .halt_reg = 0x15130,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15130,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_edp_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_2l_4_clkref_en = {
+ .halt_reg = 0x15100,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15100,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_2l_4_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_2l_5_clkref_en = {
+ .halt_reg = 0x15104,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15104,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_2l_5_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_8l_clkref_en = {
+ .halt_reg = 0x15108,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15108,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_8l_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb3_mp0_clkref_en = {
+ .halt_reg = 0x1510c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1510c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb3_mp0_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb3_mp1_clkref_en = {
+ .halt_reg = 0x15110,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15110,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb3_mp1_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_1_clkref_en = {
+ .halt_reg = 0x15114,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15114,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb2_1_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_ufs_phy_clkref_en = {
+ .halt_reg = 0x15118,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15118,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_ufs_phy_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb4_1_clkref_en = {
+ .halt_reg = 0x15120,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15120,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb4_1_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb4_2_clkref_en = {
+ .halt_reg = 0x15124,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15124,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb4_2_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_2_clkref_en = {
+ .halt_reg = 0x15128,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x15128,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_usb2_2_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_4l_clkref_en = {
+ .halt_reg = 0x1512c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1512c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "tcsr_pcie_4l_clkref_en",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_BI_TCXO_PAD,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap *tcsr_cc_x1e80100_clocks[] = {
+ [TCSR_EDP_CLKREF_EN] = &tcsr_edp_clkref_en.clkr,
+ [TCSR_PCIE_2L_4_CLKREF_EN] = &tcsr_pcie_2l_4_clkref_en.clkr,
+ [TCSR_PCIE_2L_5_CLKREF_EN] = &tcsr_pcie_2l_5_clkref_en.clkr,
+ [TCSR_PCIE_8L_CLKREF_EN] = &tcsr_pcie_8l_clkref_en.clkr,
+ [TCSR_USB3_MP0_CLKREF_EN] = &tcsr_usb3_mp0_clkref_en.clkr,
+ [TCSR_USB3_MP1_CLKREF_EN] = &tcsr_usb3_mp1_clkref_en.clkr,
+ [TCSR_USB2_1_CLKREF_EN] = &tcsr_usb2_1_clkref_en.clkr,
+ [TCSR_UFS_PHY_CLKREF_EN] = &tcsr_ufs_phy_clkref_en.clkr,
+ [TCSR_USB4_1_CLKREF_EN] = &tcsr_usb4_1_clkref_en.clkr,
+ [TCSR_USB4_2_CLKREF_EN] = &tcsr_usb4_2_clkref_en.clkr,
+ [TCSR_USB2_2_CLKREF_EN] = &tcsr_usb2_2_clkref_en.clkr,
+ [TCSR_PCIE_4L_CLKREF_EN] = &tcsr_pcie_4l_clkref_en.clkr,
+};
+
+static const struct regmap_config tcsr_cc_x1e80100_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x2f000,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc tcsr_cc_x1e80100_desc = {
+ .config = &tcsr_cc_x1e80100_regmap_config,
+ .clks = tcsr_cc_x1e80100_clocks,
+ .num_clks = ARRAY_SIZE(tcsr_cc_x1e80100_clocks),
+};
+
+static const struct of_device_id tcsr_cc_x1e80100_match_table[] = {
+ { .compatible = "qcom,x1e80100-tcsr" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tcsr_cc_x1e80100_match_table);
+
+static int tcsr_cc_x1e80100_probe(struct platform_device *pdev)
+{
+ return qcom_cc_probe(pdev, &tcsr_cc_x1e80100_desc);
+}
+
+static struct platform_driver tcsr_cc_x1e80100_driver = {
+ .probe = tcsr_cc_x1e80100_probe,
+ .driver = {
+ .name = "tcsrcc-x1e80100",
+ .of_match_table = tcsr_cc_x1e80100_match_table,
+ },
+};
+
+static int __init tcsr_cc_x1e80100_init(void)
+{
+ return platform_driver_register(&tcsr_cc_x1e80100_driver);
+}
+subsys_initcall(tcsr_cc_x1e80100_init);
+
+static void __exit tcsr_cc_x1e80100_exit(void)
+{
+ platform_driver_unregister(&tcsr_cc_x1e80100_driver);
+}
+module_exit(tcsr_cc_x1e80100_exit);
+
+MODULE_DESCRIPTION("QTI TCSR Clock Controller X1E80100 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1