Re: [PATCH 2/3] crypto: hisilicon/qm - obtain stop queue status

From: liulongfang
Date: Sun Jan 28 2024 - 21:41:00 EST

Next message: maobibo: "Re: [PATCH v6 0/4] VM: selftests: Add LoongArch support"
Previous message: Chukun Pan: "Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node"
In reply to: Weili Qian: "[PATCH 2/3] crypto: hisilicon/qm - obtain stop queue status"
Next in thread: Weili Qian: "Re: [PATCH 2/3] crypto: hisilicon/qm - obtain stop queue status"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2024/1/27 21:15, Weili Qian wrote:
> The debugfs files 'dev_state' and 'dev_timeout' are added.
> Users can query the current queue stop status through these two
> files. And set the waiting timeout when the queue is released.
>
> dev_state: if dev_timeout is set, dev_state indicates the status
> of stopping the queue. 0 indicates that the queue is stopped
> successfully. Other values indicate that the queue stops fail.
> if dev_timeout is not set, the value of dev_state is 0;
>
> dev_timeout: If the queue fails to stop, the queue is released
> after waiting dev_timeout * 20ms.
>
> Signed-off-by: Weili Qian <qianweili@xxxxxxxxxx>
> ---
> Documentation/ABI/testing/debugfs-hisi-hpre | 15 ++++
> Documentation/ABI/testing/debugfs-hisi-sec | 15 ++++
> Documentation/ABI/testing/debugfs-hisi-zip | 15 ++++
> drivers/crypto/hisilicon/debugfs.c | 5 ++
> drivers/crypto/hisilicon/qm.c | 97 +++++++++++++++------
> include/linux/hisi_acc_qm.h | 14 +++
> 6 files changed, 135 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre
> index 6ed9258605c7..e6394a2fb371 100644
> --- a/Documentation/ABI/testing/debugfs-hisi-hpre
> +++ b/Documentation/ABI/testing/debugfs-hisi-hpre
> @@ -118,6 +118,21 @@ Description: Dump the state of the device.
> 0: busy, 1: idle.
> Only available for PF, and take no other effect on HPRE.
>
> +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout
> +Date: Jan 2024
> +Contact: linux-crypto@xxxxxxxxxxxxxxx
> +Description: Set the wait time when stop queue fails. Available for both PF
> + and VF, and take no other effect on HPRE.
> + 0: not wait(default), others value: wait dev_timeout * 20 microsecond.
> +
> +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state
> +Date: Jan 2024
> +Contact: linux-crypto@xxxxxxxxxxxxxxx
> +Description: Dump the stop queue status of the QM. The default value is 0,
> + if dev_timeout is set, when stop queue fails, the dev_state
> + will return non-zero value. Available for both PF and VF,
> + and take no other effect on HPRE.
> +
> What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs
> Date: Mar 2022
> Contact: linux-crypto@xxxxxxxxxxxxxxx
> diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec
> index 403f5de96318..2b5db193b5e6 100644
> --- a/Documentation/ABI/testing/debugfs-hisi-sec
> +++ b/Documentation/ABI/testing/debugfs-hisi-sec
> @@ -98,6 +98,21 @@ Description: Dump the state of the device.
> 0: busy, 1: idle.
> Only available for PF, and take no other effect on SEC.
>
> +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_timeout
> +Date: Jan 2024
> +Contact: linux-crypto@xxxxxxxxxxxxxxx
> +Description: Set the wait time when stop queue fails. Available for both PF
> + and VF, and take no other effect on SEC.
> + 0: not wait(default), others value: wait dev_timeout * 20 microsecond.
> +
> +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/dev_state
> +Date: Jan 2024
> +Contact: linux-crypto@xxxxxxxxxxxxxxx
> +Description: Dump the stop queue status of the QM. The default value is 0,
> + if dev_timeout is set, when stop queue fails, the dev_state
> + will return non-zero value. Available for both PF and VF,
> + and take no other effect on SEC.
> +
> What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs
> Date: Mar 2022
> Contact: linux-crypto@xxxxxxxxxxxxxxx
> diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip
> index 2394e6a3cfe2..260c514e0e9e 100644
> --- a/Documentation/ABI/testing/debugfs-hisi-zip
> +++ b/Documentation/ABI/testing/debugfs-hisi-zip
> @@ -111,6 +111,21 @@ Description: Dump the state of the device.
> 0: busy, 1: idle.
> Only available for PF, and take no other effect on ZIP.
>
> +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_timeout
> +Date: Jan 2024
> +Contact: linux-crypto@xxxxxxxxxxxxxxx
> +Description: Set the wait time when stop queue fails. Available for both PF
> + and VF, and take no other effect on ZIP.
> + 0: not wait(default), others value: wait dev_timeout * 20 microsecond.
> +
> +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/dev_state
> +Date: Jan 2024
> +Contact: linux-crypto@xxxxxxxxxxxxxxx
> +Description: Dump the stop queue status of the QM. The default value is 0,
> + if dev_timeout is set, when stop queue fails, the dev_state
> + will return non-zero value. Available for both PF and VF,
> + and take no other effect on ZIP.
> +
> What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs
> Date: Mar 2022
> Contact: linux-crypto@xxxxxxxxxxxxxxx
> diff --git a/drivers/crypto/hisilicon/debugfs.c b/drivers/crypto/hisilicon/debugfs.c
> index 06e67eda409f..cd67fa348ca7 100644
> --- a/drivers/crypto/hisilicon/debugfs.c
> +++ b/drivers/crypto/hisilicon/debugfs.c
> @@ -1112,6 +1112,7 @@ DEFINE_DEBUGFS_ATTRIBUTE(qm_atomic64_ops, qm_debugfs_atomic64_get,
> void hisi_qm_debug_init(struct hisi_qm *qm)
> {
> struct dfx_diff_registers *qm_regs = qm->debug.qm_diff_regs;
> + struct qm_dev_dfx *dev_dfx = &qm->debug.dev_dfx;
> struct qm_dfx *dfx = &qm->debug.dfx;
> struct dentry *qm_d;
> void *data;
> @@ -1140,6 +1141,10 @@ void hisi_qm_debug_init(struct hisi_qm *qm)
>
> debugfs_create_file("status", 0444, qm->debug.qm_d, qm,
> &qm_status_fops);
> +
> + debugfs_create_u32("dev_state", 0444, qm->debug.qm_d, &dev_dfx->dev_state);
> + debugfs_create_u32("dev_timeout", 0644, qm->debug.qm_d, &dev_dfx->dev_timeout);
> +
> for (i = 0; i < ARRAY_SIZE(qm_dfx_files); i++) {
> data = (atomic64_t *)((uintptr_t)dfx + qm_dfx_files[i].offset);
> debugfs_create_file(qm_dfx_files[i].name,
> diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
> index 3b015482b4e6..75d0b2ea117e 100644
> --- a/drivers/crypto/hisilicon/qm.c
> +++ b/drivers/crypto/hisilicon/qm.c
> @@ -2037,43 +2037,25 @@ static void qp_stop_fail_cb(struct hisi_qp *qp)
> }
> }
>
> -/**
> - * qm_drain_qp() - Drain a qp.
> - * @qp: The qp we want to drain.
> - *
> - * Determine whether the queue is cleared by judging the tail pointers of
> - * sq and cq.
> - */
> -static int qm_drain_qp(struct hisi_qp *qp)
> +static int qm_wait_qp_empty(struct hisi_qm *qm, u32 *state, u32 qp_id)
> {
> - struct hisi_qm *qm = qp->qm;
> struct device *dev = &qm->pdev->dev;
> struct qm_sqc sqc;
> struct qm_cqc cqc;
> int ret, i = 0;
>
> - /* No need to judge if master OOO is blocked. */
> - if (qm_check_dev_error(qm))
> - return 0;
> -
> - /* Kunpeng930 supports drain qp by device */
> - if (test_bit(QM_SUPPORT_STOP_QP, &qm->caps)) {
> - ret = qm_stop_qp(qp);
> - if (ret)
> - dev_err(dev, "Failed to stop qp(%u)!\n", qp->qp_id);
> - return ret;
> - }
> -
> while (++i) {
> - ret = qm_set_and_get_xqc(qm, QM_MB_CMD_SQC, &sqc, qp->qp_id, 1);
> + ret = qm_set_and_get_xqc(qm, QM_MB_CMD_SQC, &sqc, qp_id, 1);
> if (ret) {
> dev_err_ratelimited(dev, "Failed to dump sqc!\n");
> + *state = DUMP_SQC_FAIL;
> return ret;
> }
>
> - ret = qm_set_and_get_xqc(qm, QM_MB_CMD_CQC, &cqc, qp->qp_id, 1);
> + ret = qm_set_and_get_xqc(qm, QM_MB_CMD_CQC, &cqc, qp_id, 1);
> if (ret) {
> dev_err_ratelimited(dev, "Failed to dump cqc!\n");
> + *state = DUMP_CQC_FAIL;
> return ret;
> }
>
> @@ -2082,8 +2064,9 @@ static int qm_drain_qp(struct hisi_qp *qp)
> break;
>
> if (i == MAX_WAIT_COUNTS) {
> - dev_err(dev, "Fail to empty queue %u!\n", qp->qp_id);
> - return -EBUSY;
> + dev_err(dev, "Fail to empty queue %u!\n", qp_id);
> + *state = STOP_QUEUE_FAIL;
> + return -ETIMEDOUT;
> }
>
> usleep_range(WAIT_PERIOD_US_MIN, WAIT_PERIOD_US_MAX);
> @@ -2092,6 +2075,49 @@ static int qm_drain_qp(struct hisi_qp *qp)
> return 0;
> }
>
> +/**
> + * qm_drain_qp() - Drain a qp.
> + * @qp: The qp we want to drain.
> + *
> + * If the device does not support stopping queue by sending mailbox,
> + * determine whether the queue is cleared by judging the tail pointers of
> + * sq and cq.
> + */
> +static int qm_drain_qp(struct hisi_qp *qp)
> +{
> + struct hisi_qm *qm = qp->qm;
> + struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(qm->pdev));
> + u32 state = 0;
> + int ret;
> +
> + /* No need to judge if master OOO is blocked. */
> + if (qm_check_dev_error(pf_qm))
> + return 0;
> +
> + /* HW V3 supports drain qp by device */
> + if (test_bit(QM_SUPPORT_STOP_QP, &qm->caps)) {
> + ret = qm_stop_qp(qp);
> + if (ret) {
> + dev_err(&qm->pdev->dev, "Failed to stop qp!\n");
> + state = STOP_QUEUE_FAIL;
> + goto set_dev_state;
> + }
> + return ret;
> + }
> +
> + ret = qm_wait_qp_empty(qm, &state, qp->qp_id);
> + if (ret)
> + goto set_dev_state;
> +
> + return 0;
> +
> +set_dev_state:
> + if (qm->debug.dev_dfx.dev_timeout)
> + qm->debug.dev_dfx.dev_state = state;
> +
> + return ret;
> +}
> +
> static int qm_stop_qp_nolock(struct hisi_qp *qp)
> {
> struct hisi_qm *qm = qp->qm;
> @@ -2319,7 +2345,26 @@ static int hisi_qm_uacce_start_queue(struct uacce_queue *q)
>
> static void hisi_qm_uacce_stop_queue(struct uacce_queue *q)
> {
> - hisi_qm_stop_qp(q->priv);
> + struct hisi_qp *qp = q->priv;
> + struct hisi_qm *qm = qp->qm;
> + struct qm_dev_dfx *dev_dfx = &qm->debug.dev_dfx;
> + u32 i = 0;
> +
> + hisi_qm_stop_qp(qp);
> +
> + if (!dev_dfx->dev_timeout || !dev_dfx->dev_state)
> + return;
> +
> + while (++i) {
> + if (!i || i > dev_dfx->dev_timeout) {

The "!i" judgment here is redundant. What needs to be considered is the situation
if i is equal to dev_timeout and both are UINT_MAX.

Thanks,
Longfang.

> + dev_err(&qm->pdev->dev, "Stop q %u timeout, state %u\n",
> + qp->qp_id, dev_dfx->dev_state);
> + dev_dfx->dev_state = FINISH_WAIT;
> + break;
> + }
> +
> + msleep(WAIT_PERIOD);
> + }
> }
>
> static int hisi_qm_is_q_updated(struct uacce_queue *q)
> diff --git a/include/linux/hisi_acc_qm.h b/include/linux/hisi_acc_qm.h
> index 720f10874a66..ec5a70ade511 100644
> --- a/include/linux/hisi_acc_qm.h
> +++ b/include/linux/hisi_acc_qm.h
> @@ -158,6 +158,19 @@ enum qm_cap_bits {
> QM_SUPPORT_RPM,
> };
>
> +enum qm_dev_fail_state {
> + STOP_QUEUE_FAIL = 1,
> + ALLOC_CTX_FAIL,
> + DUMP_SQC_FAIL,
> + DUMP_CQC_FAIL,
> + FINISH_WAIT,
> +};
> +
> +struct qm_dev_dfx {
> + u32 dev_state;
> + u32 dev_timeout;
> +};
> +
> struct qm_dev_alg {
> u64 alg_msk;
> const char *alg;
> @@ -191,6 +204,7 @@ struct qm_debug {
> struct dentry *debug_root;
> struct dentry *qm_d;
> struct debugfs_file files[DEBUG_FILE_NUM];
> + struct qm_dev_dfx dev_dfx;
> unsigned int *qm_last_words;
> /* ACC engines recoreding last regs */
> unsigned int *last_words;
>

Next message: maobibo: "Re: [PATCH v6 0/4] VM: selftests: Add LoongArch support"
Previous message: Chukun Pan: "Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node"
In reply to: Weili Qian: "[PATCH 2/3] crypto: hisilicon/qm - obtain stop queue status"
Next in thread: Weili Qian: "Re: [PATCH 2/3] crypto: hisilicon/qm - obtain stop queue status"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]