[PATCH 05/18] ASoC: cs35l56: Don't add the same register patch multiple times

[Richard Fitzgerald]

Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.

The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.

Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
Fixes: 898673b905b9 ("ASoC: cs35l56: Move shared data into a common data structure")
---
 sound/soc/codecs/cs35l56.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c
index 491da77112c3..ea5d2b2eb82a 100644
--- a/sound/soc/codecs/cs35l56.c
+++ b/sound/soc/codecs/cs35l56.c
@@ -1159,6 +1159,10 @@ int cs35l56_init(struct cs35l56_private *cs35l56)
 	if (ret < 0)
 		return ret;
 
+	ret = cs35l56_set_patch(&cs35l56->base);
+	if (ret)
+		return ret;
+
 	/* Populate the DSP information with the revision and security state */
 	cs35l56->dsp.part = devm_kasprintf(cs35l56->base.dev, GFP_KERNEL, "cs35l56%s-%02x",
 					   cs35l56->base.secured ? "s" : "", cs35l56->base.rev);
@@ -1197,10 +1201,6 @@ int cs35l56_init(struct cs35l56_private *cs35l56)
 	if (ret)
 		return ret;
 
-	ret = cs35l56_set_patch(&cs35l56->base);
-	if (ret)
-		return ret;
-
 	/* Registers could be dirty after soft reset or SoundWire enumeration */
 	regcache_sync(cs35l56->base.regmap);
 
-- 
2.39.2