[PATCH] pinctrl: mcp23s08: Check only GPIOs which have interrupts enabled
From: Arturas Moskvinas
Date: Tue Jan 30 2024 - 02:38:10 EST
GPINTEN register contains information about GPIOs with enabled
interrupts no need to check other GPIOs for changes.
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>
---
drivers/pinctrl/pinctrl-mcp23s08.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 4551575e4e7d..bfa933284e84 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -375,7 +375,8 @@ mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
static irqreturn_t mcp23s08_irq(int irq, void *data)
{
struct mcp23s08 *mcp = data;
- int intcap, intcon, intf, i, gpio, gpio_orig, intcap_mask, defval;
+ int intcap, intcon, intf, i, gpio, gpio_orig, intcap_mask, defval, gpinten;
+ unsigned long int enabled_interrupts;
unsigned int child_irq;
bool intf_set, intcap_changed, gpio_bit_changed,
defval_changed, gpio_set;
@@ -395,6 +396,10 @@ static irqreturn_t mcp23s08_irq(int irq, void *data)
if (mcp_read(mcp, MCP_INTCON, &intcon))
goto unlock;
+ if (mcp_read(mcp, MCP_GPINTEN, &gpinten))
+ goto unlock;
+ enabled_interrupts = gpinten;
+
if (mcp_read(mcp, MCP_DEFVAL, &defval))
goto unlock;
@@ -410,9 +415,10 @@ static irqreturn_t mcp23s08_irq(int irq, void *data)
"intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n",
intcap, intf, gpio_orig, gpio);
- for (i = 0; i < mcp->chip.ngpio; i++) {
- /* We must check all of the inputs on the chip,
- * otherwise we may not notice a change on >=2 pins.
+ for_each_set_bit(i, &enabled_interrupts, mcp->chip.ngpio) {
+ /* We must check all of the inputs with enabled interrupts
+ * on the chip, otherwise we may not notice a change
+ * on >=2 pins.
*
* On at least the mcp23s17, INTCAP is only updated
* one byte at a time(INTCAPA and INTCAPB are
base-commit: 41bccc98fb7931d63d03f326a746ac4d429c1dd3
--
2.43.0