Re: [PATCH net v2] net: stmmac: protect updates of 64-bit statistics counters

[Jisheng Zhang]

On Tue, Jan 30, 2024 at 08:35:39AM +0100, Petr Tesařík wrote:
> On Tue, 30 Jan 2024 13:00:10 +0800
> Jisheng Zhang <jszhang@xxxxxxxxxx> wrote:
> 
> > On Sun, Jan 28, 2024 at 08:35:29PM +0100, Petr Tesarik wrote:
> > > As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
> > > u64_stats_sync must ensure mutual exclusion, or one seqcount update could
> > > be lost on 32-bit platforms, thus blocking readers forever. Such lockups
> > > have been observed in real world after stmmac_xmit() on one CPU raced with
> > > stmmac_napi_poll_tx() on another CPU.
> > > 
> > > To fix the issue without introducing a new lock, split the statics into
> > > three parts:
> > > 
> > > 1. fields updated only under the tx queue lock,
> > > 2. fields updated only during NAPI poll,
> > > 3. fields updated only from interrupt context,
> > > 
> > > Updates to fields in the first two groups are already serialized through
> > > other locks. It is sufficient to split the existing struct u64_stats_sync
> > > so that each group has its own.
> > > 
> > > Note that tx_set_ic_bit is updated from both contexts. Split this counter
> > > so that each context gets its own, and calculate their sum to get the total
> > > value in stmmac_get_ethtool_stats().
> > > 
> > > For the third group, multiple interrupts may be processed by different CPUs
> > > at the same time, but interrupts on the same CPU will not nest. Move fields
> > > from this group to a newly created per-cpu struct stmmac_pcpu_stats.
> > > 
> > > Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
> > > Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@xxxxxxxxxxxxxxxxxxx/t/
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > Signed-off-by: Petr Tesarik <petr@xxxxxxxxxxx>  
> > 
> > Thanks for the fix patch. One trivial improviement below
> > s/netdev_alloc_pcpu_stats/devm_netdev_alloc_pcpu_stats to simplify
> > error and exit code path.
> 
> Thanks for your review.
> 
> In fact, many other allocations in stmmac could be converted to devm_*.
> I wanted to stay consistent with the existing code, but hey, you're

there's already devm_* usage in stmmac_dvr_probe(), eg. devm_alloc_etherdev_mqs
I believe other parts are from the old days when there's no devm_* APIs

> right there's no good reason for it.
> 
> Plus, I can send convert the other places with another patch.
> 
> > With that:
> > Reviewed-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
> > 
> > PS: when I sent the above "net: stmmac: use per-queue 64 bit statistics
> > where necessary", I had an impression: there are too much statistics in
> > stmmac driver, I didn't see so many statistics in other eth drivers, is
> > it possible to remove some useless or not that useful statistic members?
> 
> I don't feel authorized to make the decision. But I also wonder about
> some counters. For example, why is there tx_packets and tx_pkt_n? The
> former is shown as RX packets by "ip stats show dev end0", the latter
> is shown by as tx_pkt_n by "ethtools -S end0". The values do differ,
> but I have no clue why, and if they are even expected to be different
> or if it's a bug.
> 
> Petr T