[PATCH v2 2/4] arm64: dts: rockchip: enable temperature driven fan control on Rock 5B

[Alexey Charkov]

This enables thermal monitoring on Radxa Rock 5B and links the PWM
fan as an active cooling device managed automatically by the thermal
subsystem, with a target SoC temperature of 65C and a minimum-spin
interval from 55C to 65C to ensure airflow when the system gets warm

Acked-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Signed-off-by: Alexey Charkov <alchark@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 34 ++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index a0e303c3a1dc..b485edeef876 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -52,7 +52,7 @@ led_rgb_b {
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";
-		cooling-levels = <0 95 145 195 255>;
+		cooling-levels = <0 120 150 180 210 240 255>;
 		fan-supply = <&vcc5v0_sys>;
 		pwms = <&pwm1 0 50000 0>;
 		#cooling-cells = <2>;
@@ -173,6 +173,34 @@ &cpu_l3 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+		map1 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 1 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -731,6 +759,10 @@ regulator-state-mem {
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";

-- 
2.43.0