[PATCH V2 net] hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove

[Souradeep Chakrabarti]

In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.

This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.

netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.

Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.

This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.

Call trace:
[  654.559417] task:modprobe        state:D stack:    0 pid: 2321 ppid:  1091 flags:0x00004002
[  654.568030] Call Trace:
[  654.571221]  <TASK>
[  654.573790]  __schedule+0x2d6/0x960
[  654.577733]  schedule+0x69/0xf0
[  654.581214]  schedule_timeout+0x87/0x140
[  654.585463]  ? __bpf_trace_tick_stop+0x20/0x20
[  654.590291]  msleep+0x2d/0x40
[  654.593625]  napi_disable+0x2b/0x80
[  654.597437]  netvsc_device_remove+0x8a/0x1f0 [hv_netvsc]
[  654.603935]  rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc]
[  654.611101]  ? do_wait_intr+0xb0/0xb0
[  654.615753]  netvsc_remove+0x7c/0x120 [hv_netvsc]
[  654.621675]  vmbus_remove+0x27/0x40 [hv_vmbus]

Cc: stable@xxxxxxxxxxxxxxx
Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Dexuan Cui <decui@xxxxxxxxxxxxx>
Reviewed-by: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
---
V1 -> V2:
Changed commit message, added some more details on
napi NAPIF_STATE_SCHED bit set and reset.
---
 drivers/net/hyperv/netvsc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 1dafa44155d0..a6fcbda64ecc 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -708,7 +708,10 @@ void netvsc_device_remove(struct hv_device *device)
 	/* Disable NAPI and disassociate its context from the device. */
 	for (i = 0; i < net_device->num_chn; i++) {
 		/* See also vmbus_reset_channel_cb(). */
-		napi_disable(&net_device->chan_table[i].napi);
+		/* only disable enabled NAPI channel */
+		if (i < ndev->real_num_rx_queues)
+			napi_disable(&net_device->chan_table[i].napi);
+
 		netif_napi_del(&net_device->chan_table[i].napi);
 	}
 
-- 
2.34.1