Re: [PATCH] spi: imx: fix the burst length at DMA mode and CPU mode

[Marc Kleine-Budde]

On 31.01.2024 10:46:23, carlos.song@xxxxxxx wrote:
> From: Carlos Song <carlos.song@xxxxxxx>
> 
> For DMA mode, the bus width of the DMA is equal to the size of data
> word, so burst length should be configured as bits per word.
> 
> For CPU mode, because of the spi transfer len is in byte, so burst
> length should be configured as bits per byte * spi_imx->count.
> 
> Signed-off-by: Carlos Song <carlos.song@xxxxxxx>
> Reviewed-by: Clark Wang <xiaoning.wang@xxxxxxx>
> Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
> Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
> ---
>  drivers/spi/spi-imx.c | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index 546cdce525fc..b4ade2d53fef 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -54,7 +54,7 @@ MODULE_PARM_DESC(polling_limit_us,
>  #define MX51_ECSPI_CTRL_MAX_BURST	512
>  /* The maximum bytes that IMX53_ECSPI can transfer in target mode.*/
>  #define MX53_MAX_TRANSFER_BYTES		512
> -
> +#define BITS_PER_BYTE	8

That's already defined in linux/bits.h

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature