Re: [PATCH net-next v4 08/11] stmmac: intel: configure SerDes according to the interface mode

[Ilpo Järvinen]

On Mon, 29 Jan 2024, Choong Yong Liang wrote:

> From: "Tan, Tee Min" <tee.min.tan@xxxxxxxxxxxxxxx>
> 
> Intel platform will configure the SerDes through PMC api based on the
> provided interface mode.
> 
> This patch adds several new functions below:-
> - intel_tsn_interface_is_available(): This new function reads FIA lane
>   ownership registers and common lane registers through IPC commands
>   to know which lane the mGbE port is assigned to.
> - intel_config_serdes(): To configure the SerDes based on the assigned
>   lane and latest interface mode, it sends IPC command to the PMC through
>   PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
> - intel_set_reg_access(): Set the register access to the available TSN
>   interface.
> 
> Signed-off-by: Tan, Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>
> Signed-off-by: Choong Yong Liang <yong.liang.choong@xxxxxxxxxxxxxxx>
> ---
>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |   1 +
>  .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 113 +++++++++++++++++-
>  .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  75 ++++++++++++
>  3 files changed, 188 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 85dcda51df05..be423fb2b46c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -273,6 +273,7 @@ config DWMAC_INTEL
>  	default X86
>  	depends on X86 && STMMAC_ETH && PCI
>  	depends on COMMON_CLK
> +	select INTEL_PMC_IPC

INTEL_PMC_IPC has depends on ACPI but selecting INTEL_PMC_IPC won't 
enforce it AFAIK.

-- 
 i.