[PATCH v3 0/6] riscv: dts: starfive: add Milkv Mars board device tree

From: Jisheng Zhang
Date: Wed Jan 31 2024 - 08:38:58 EST


The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:

- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI

patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 ~ patch4 adopt Krzysztof's suggestions to DT node names
patch5 introduces a board common dtsi for visionfive2 and mars
patch3 adds the mars board dts file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.

Since v2:
- add a common board file which can be used by vf2 and mars

Since v1:
- add two new patches which add "cpus" label and board dt-binding
- adopt Krzysztof's suggestions, thanks

Jisheng Zhang (6):
riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
dt-bindings: riscv: starfive: add Milkv Mars board
riscv: dts: starfive: visionfive 2: update sound and codec dt node
name
riscv: dts: starfive: visionfive 2: use cpus label for timebase freq
riscv: dts: starfive: introduce a common board dtsi for jh7110 based
boards
riscv: dts: starfive: add Milkv Mars board device tree

.../devicetree/bindings/riscv/starfive.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +-
.../boot/dts/starfive/jh7110-milkv-mars.dts | 35 +
.../jh7110-starfive-visionfive-2.dtsi | 600 +----------------
.../jh7110-visionfive2-mars-common.dtsi | 617 ++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +-
7 files changed, 657 insertions(+), 601 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi

--
2.43.0