Re: [Intel-wired-lan] [PATCH net-next v5] ethtool: ice: Support for RSS settings to GTP from ethtool

[takeru hayasaka]

Hi Marcin-san

> LGTM

Thanks for your review!

> Still removing this line :c

Oh! Sorry for the oversight. I will fix it in the next patch.
Could you please take another look at the patch?

Thanks
Takeru
2024年1月31日(水) 20:53 Marcin Szycik <marcin.szycik@xxxxxxxxxxxxxxx>:

>
>
>
> On 31.01.2024 02:37, Takeru Hayasaka wrote:
> > This is a patch that enables RSS functionality for GTP packets using ethtool.
> >
> > A user can include TEID and make RSS work for GTP-U over IPv4 by doing the
> > following:`ethtool -N ens3 rx-flow-hash gtpu4 sde`
> >
> > In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e,
> > gtpu(4|6)u, and gtpu(4|6)d.
> >
> > gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does
> > not include a TEID.
> > gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that
> > includes a TEID.
> > gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios.
> > gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6.
> > gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended
> > header includes Uplink, applicable to both IPv4 and IPv6.
> > gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink,
> > for both IPv4 and IPv6.
> >
> > GTP generates a flow that includes an ID called TEID to identify the tunnel.
> > This tunnel is created for each UE (User Equipment).By performing RSS based on
> > this flow, it is possible to apply RSS for each communication unit from the UE.
> > Without this, RSS would only be effective within the range of IP addresses. For
> > instance, the PGW can only perform RSS within the IP range of the SGW.
> > Problematic from a load distribution perspective, especially if there's a bias
> > in the terminals connected to a particular base station.This case can be
> > solved by using this patch.
>
> LGTM
> Reviewed-by: Marcin Szycik <marcin.szycik@xxxxxxxxxxxxxxx>
>
> > Signed-off-by: Takeru Hayasaka <hayatake396@xxxxxxxxx>
> > ---
> > v2->v3: Based on Harald-san's review, I added documentation and comments to
> > ethtool.h and ice.rst.
> > v3->v4: Based on Marcin-san's review, I added the missing code for GTPC and
> > GTPC_TEID, and revised the documentation and comments.
> > v4->v5: Based on Marcin-san's review, I fixed rename and wrong code regarding
> > GTPC
>
> [...]
>
> >      f     Hash on bytes 0 and 1 of the Layer 4 header of the Rx packet.
> >      n     Hash on bytes 2 and 3 of the Layer 4 header of the Rx packet.
> > -
>
> Still removing this line :c
>
> > +    e     Hash on GTP Packet on TEID (4bytes) of the Rx packet.
> >
> >  Accelerated Receive Flow Steering (aRFS)
> >  ----------------------------------------
>
> ---8<---