Re: [PATCH] ahci: asm1064: correct count of reported ports

[Andrey Melnikov]

>
> Hi Andrey
>
> On 2/7/24 10:58, Andrey Jr. Melnikov wrote:
> > The ASM1064 SATA host controller always reports wrongly,
> > that it has 24 ports. But in reality, it only has four ports.
> >
> > before:
> > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
> > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
> > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
> >
> > after:
> > ahci 0000:04:00.0: ASM1064 has only four ports
> > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
> > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
> > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
>
> This still says 24 ports, is that a copy & paste error in the commit msg ?

This is the raw value of the read-only Host Capability register, how
should it be changed here? If silicon lies about its configuration -
kerel prints what it sees from silicon.