Re: [PATCH v3] mmc: renesas_sdhi: Fix change point of data handling

[claudiu beznea]

Hi, Wolfram,

On 08.02.2024 02:56, Wolfram Sang wrote:
> Hi Claudiu,
> 
> I got more information about SMPCMP now. I had a misunderstanding there.
> According to your patch description, you might have the same
> misunderstanding? Let me quote again:
> 
> ===
> RZ hardware manual are similar on this chapter), at the time of tuning,
> data is captured by the previous and next TAPs and the result is stored in
> the SMPCMP register (previous TAP in bits 22..16, next TAP in bits 7..0).
> ===
> 
> It is not the previous and next TAP but the previous and next clock
> cycle using the *same* TAP. And the bits in the register describe if
> there was a mismatch in the data bits across these clock cycles.

That's something new for me, it's not described in HW manual (or at least I
haven't found it).

> 
> So, we really want SMPCMP to be 0 because the data should be stable
> across all three clock cycles of the same TAP.

So, it means issues should be somewhere else on my setup.

> 
>> As of my understanding the TAP where cmpngu = 0x0e and cmpngd=0x0e is not
>> considered change point of the input data. For that to happen it would mean
>> that cmpngu != cmpngd.
> 
> I am not sure you can assume that cmpngu != cmpngd is always true for a
> change point. I'd think it is likely often the case. But always? I am
> not convinced. 

That's was my understanding from HW manual and since it fixed my issue I
considered it valid at the point I wrote this statement. Maybe we need to
understand this?

> But I am convinced that if SMPCMP is 0, this is a good
> TAP because it was stable over these clock cycles.
> 
>> From this snapshot, datasheet and our discussions:
>>
>> i=0, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> i=1, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> i=2, cmpngu=0000000e, cmpngd=0000000e, smpcmp=000e000e
>> i=3, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> *i=4, cmpngu=00000000, cmpngd=00000002, smpcmp=00000002*
>> *i=5, cmpngu=00000000, cmpngd=000000ff, smpcmp=000001ff*
>> *i=6, cmpngu=000000ff, cmpngd=00000000, smpcmp=01ff0000*
>> i=7, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> i=8, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> i=9, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> i=10, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> i=11, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>> *i=12, cmpngu=00000000, cmpngd=00000002, smpcmp=00000002*
>> *i=13, cmpngu=00000000, cmpngd=000000ff, smpcmp=000001ff*
>> *i=14, cmpngu=000000ff, cmpngd=00000000, smpcmp=01ff0000*
>> i=15, cmpngu=00000000, cmpngd=00000000, smpcmp=00000000
>>
>> I understand that TAP4,5,6 are change point of the input data and
>> TAP8,0,1,2,3 are candidates for being selected, TAP 1,2 being the best
>> (please correct me if I'm wrong).
> 
> I agree that TAP4-6 are the change point. TAP2 could be a candidate. I
> dunno why SMPCMP is non-zero at i == 2, maybe some glitch due to noise
> on the board?

Hm... it worth considering it...

> 
> I do really wonder why probing failed, though? TAP1 sounds like a good
> choice as well. I mean we consider SMPCMP only if all TAPs are good. So,
> if probing fails, that means that SMPCMP was non-zero all the time?

Yes, that was my finding as well on my setup which leads to this patch.

If we're taking as example the snapshot I dropped here in a previous email,
and do not consider this patch, code at [1] should clear bit for TAP2 in
smpcmp mask because in the 1st round SMPCMP was not zero (but 0x000e000e)
and in the 2nd round it was zero.

[1]
https://elixir.bootlin.com/linux/latest/source/drivers/mmc/host/renesas_sdhi_core.c#L629

> 
> That being said, our code to select the best TAP from SMPCMP is really
> not considering the change point :( It just picks the first one where
> SMPCMP is 0.

Hm... I thought code at [2] selects the TAP in the middle (in the snapshot
I pointed, TAP1).

[1]
https://elixir.bootlin.com/linux/latest/source/drivers/mmc/host/renesas_sdhi_core.c#L656


> We are not checking where the change point is and try to be
> as far away as possible.
> 
>> root@smarc-rzg3s:~# md5sum out test
>> b053723af63801e665959d48cb7bd8e6  out
>> b053723af63801e665959d48cb7bd8e6  test
>>
>> Do yo consider this enough?
> 
> Yes, if done 100 times ;)

This may take a while...

> 
> I hope this mail was helpful?

The tuning procedure it's better understand now. But I'm not sure in which
direction should I dig further... :)

Thank you for details and patience,
Claudiu Beznea

> 
> Thanks and happy hacking,
> 
>    Wolfram
>