Re: [PATCH 3/7] arm64: dts: qcom: sm8550: Mark QUPs and GPI dma-coherent

[Neil Armstrong]

On 12/02/2024 14:10, Konrad Dybcio wrote:
> These peripherals are DMA-coherent on 8550. Mark them as such.
>
> Interestingly enough, the I2C master hubs are not.

Yeah they are not DMA capable at all

> Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8550.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index b8f1c7f97e48..d696ec6c6850 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -812,6 +812,7 @@ gpi_dma2: dma-controller@800000 {
>   			dma-channels = <12>;
>   			dma-channel-mask = <0x3e>;
>   			iommus = <&apps_smmu 0x436 0>;
> +			dma-coherent;
>   			status = "disabled";
>   		};
>   
> @@ -823,6 +824,7 @@ qupv3_id_1: geniqup@8c0000 {
>   			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
>   				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
>   			iommus = <&apps_smmu 0x423 0>;
> +			dma-coherent;
>   			#address-cells = <2>;
>   			#size-cells = <2>;
>   			status = "disabled";
> @@ -1322,6 +1324,7 @@ gpi_dma1: dma-controller@a00000 {
>   			dma-channels = <12>;
>   			dma-channel-mask = <0x1e>;
>   			iommus = <&apps_smmu 0xb6 0>;
> +			dma-coherent;
>   			status = "disabled";
>   		};
>   
> @@ -1335,6 +1338,7 @@ qupv3_id_0: geniqup@ac0000 {
>   			iommus = <&apps_smmu 0xa3 0>;
>   			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
>   			interconnect-names = "qup-core";
> +			dma-coherent;
>   			#address-cells = <2>;
>   			#size-cells = <2>;
>   			status = "disabled";

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>