[PATCH v5] arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl

[Siddharth Vadapalli]

From: Chintan Vankar <c-vankar@xxxxxx>

Change offset in mux-reg-masks property for serdes_ln_ctrl node
since reg-mux property is used in compatible.

Fixes: 2765149273f4 ("mux: mmio: use reg property when parent device is not a syscon")
Signed-off-by: Chintan Vankar <c-vankar@xxxxxx>
Acked-by: Andrew Davis <afd@xxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
Hello,

This patch is based on linux-next tagged next-20240213.
The v4 of this patch is a part of the series at:
https://lore.kernel.org/r/20240131101441.1362409-1-c-vankar@xxxxxx/

Since the v4 series mentioned above has open comments on the other
patches in the series, this patch is being posted separately to unblock
other dependent series which rely on the fix implemented by this patch.

Changes since v4:
- Rebased patch on linux-next tagged next-20240213.

Regards,
Siddharth.

 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 3cb964982792..3b7f0eca977b 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -52,12 +52,12 @@ serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x00004080 0x30>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-					<0x4088 0x3>, <0x408c 0x3>, /* SERDES0 lane2/3 select */
-					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
-					<0x4098 0x3>, <0x409c 0x3>, /* SERDES1 lane2/3 select */
-					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
-					<0x40a8 0x3>, <0x40ac 0x3>; /* SERDES2 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
+					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
+					<0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */
+					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
+					<0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */
 			idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
 				      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
 				      <J784S4_SERDES0_LANE2_IP3_UNUSED>,
-- 
2.34.1